Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Ford Bronco (1980-1986) Bucket Seat and Fitting Guide

Choose seats and fitting parts for your 1980-1986 Bronco

Which fitting parts do you need to replace the original bucket seats in a 1980-1986 Bronco? Planted names SB256 for this full-size third-generation application and excludes bench-seat models. Confirm that starting point before choosing the seat and the components above the lower bracket.

Garreth would compare a supportive recliner with a fixed bucket around the way the Bronco is used.

Cameron starts with the original seating, actual floor attachments and physical side. The shop uses RHD position labels, while Planted’s Driver / Left and Passenger / Right references describe physical sides. Keep those details with the exact seat and runner combination.

At a glance

  • Scope: full-size third-generation Bronco,1980-1986, within the named original bucket-seat application.
  • Lower fitting route: Planted SB256; bench-seat models are excluded by the manufacturer.
  • Physical left: SB256DR Standard or COBRA-SB256DR Alternate.
  • Physical right: SB256PA Standard or COBRA-SB256PA Alternate.
  • Confirm the supplied runner pattern separately from the physical side.
  • Trial driving position, rear access, adjustment and restraint equipment in the actual truck.

Identify the original seating before choosing the bracket

This guide covers the full-size third-generation Ford Bronco within Planted’s 1980-1986 application. The manufacturer excludes bench-seat models. Start with the truck’s original seating and floor attachments, including any later conversion or repair.

An existing bench installation needs its own fitting assessment. Removing the bench does not bring that truck within the stated SB256 application.

Use the named SB256 application for original bucket-seat models

The linked Planted SB256 is the vehicle-specific lower bracket to check for this application. It connects the truck’s floor attachments to the selected seat assembly. Match the physical side and supplied pattern before choosing the parts above it. A complete quotation should identify the bracket, runner or fixed arrangement, upper supports where needed, and hardware.

Photographs of the bare mounting area help Cameron compare the actual truck with the named application.

Write the physical side beside the supplied bracket reference

Planted identifies SB256DR as physical left and SB256PA as physical right. The shop labels those choices RHD Passenger Side and RHD Driver Side respectively. On an LHD Bronco, the driver sits on physical left, so the manufacturer and shop driver labels refer to different positions.

Cameron would put left or right and the actual steering arrangement on the quotation. Include details of any RHD conversion, and have its mounting arrangement checked.

SB256 side references for the named original bucket-seat application
Physical sideStandard referenceAlternate referencePosition to confirm
LeftSB256DRCOBRA-SB256DRLHD driver / RHD passenger
RightSB256PACOBRA-SB256PALHD passenger / RHD driver

Choose the runner pattern and upper connection together

Planted offers Standard and Alternate patterns. Standard includes the Recaro slider pattern; Alternate substitutes the Cobra / Scheel-Mann pattern. The shop’s side selection identifies a position and does not independently specify an Alternate bracket. Ask us to confirm the supplied pattern with the exact runner before ordering.

The Cobra Premium runners, Sparco sliding runner kit and Sparco steel side mounts are separate catalogue options to assess. Check a runner’s lower connection to SB256 and its upper connection to the seat or side supports. Planted distinguishes Narrow and Wide Cobra slider layouts, so keep the precise runner version with the quotation.

Use suitable side supports when the chosen shell requires side fixings.

Try a fixed bucket for support and access in the Bronco

The Corbeau Pro Series X, Corbeau Sprint X System 1 XL and OMP WRC-R are fixed-back choices to compare with the driver. These are seat examples, with the complete mounting arrangement still to be specified for the truck. Check the actual shell version and permitted fixings before choosing the supports.

Garreth would try entry and exit as well as the seated position. The Sprint X shown here is the XL version; assess that shell’s width against the driver and cab. Trial access past the bolster with the door open, then check clearance with the door closed.

Compare recliners for regular road and trail use

The Sparco R333, Cobra Daytona and Corbeau Sportline RRS provide reclining alternatives. Compare cushion support and the adjustment controls with the regular driver. Check the exact seat’s base fixings and the complete bracket and runner assembly. Leave room to operate the recline control and move the backrest through the travel you need.

The linked RRS product supplies two seats. Each position needs its own confirmed lower fitting assembly. Where rear seats remain in use, trial the actual route into the rear of the Bronco; choosing a recliner does not establish that the original front-seat tipping mechanism is retained.

Have the full floor-to-seat assembly itemised

A named lower bracket is the starting point for the order. Confirm the required quantity for each position and the exact Standard or Alternate version. Add only the upper components needed by the selected seat.

Garreth would have the complete combination quoted before buying extra runners or supports.

  • SB256 application, physical side and supplied bracket pattern.
  • Exact seat model and version, with its permitted mounting method.
  • Selected runner or separately specified fixed installation.
  • Required side supports, spacers and component-specific hardware.
  • Buckle and restraint arrangement assessed with the finished seating position.

Trial driving position, adjustment and rear access in the truck

Set up the complete assembly with the regular driver. Check steering and pedal reach, visibility and the space beside the door and centre area. Include the gear and transfer-case controls actually fitted. Trial the runner handle and adjustment controls at the positions the driver needs.

Cameron would also check rear access with the chosen front seat in place. If the Bronco has retained rear seating, assess its entry route and belt access alongside the front-seat installation.

Measure the finished seat position in that assembly. There is no single lowering figure for every SB256, runner and seat combination.

Plan the restraint arrangement with the selected seat

Have the existing belt attachments, buckle position and belt path checked with the seat fitted. Include any proposed replacement buckle or adapter in the parts list. The bracket application does not by itself establish how the truck’s original restraint equipment will be retained.

The Takata Drift II, TRS Magnum four-point and Schroth Profi 3×2 six-point listings are harness examples for a separate equipment assessment. Choose the actual belt version for the intended use and follow its current instructions. Suitable vehicle anchors and routing need checking with the chosen seat; openings in the shell and holes in a frame do not settle those requirements.

Trial the lower bracket before completing the assembly

Check the supplied label and physical side against the quotation before dismantling the original seats. Trial the bare lower bracket on the actual mounting points, with the installer assessing repairs or previous modifications. Resolve any difference from the named original bucket-seat application before adding the runner and seat.

Use the exact component instructions and specified hardware. Trial the finished driving position, adjustment, cab clearance and restraint arrangement before final tightening. Have the installer complete the agreed checks before the vehicle is used.

Send the details needed for a complete Bronco fitting quotation

Send the model year and chassis details with the original market and actual steering arrangement. Include photographs of the original seating, floor attachments and visible part labels. Tell us which positions are changing and whether any rear seating remains in use.

Add the preferred seat, driver requirements and the parts you hope to reuse. Garreth can then discuss the seat choice alongside the fitting information Cameron needs.

  • Original bucket-seat or bench configuration, including previous conversions.
  • Physical left or right position and any steering conversion.
  • Full bracket reference and supplied pattern to confirm.
  • Exact seat and runner or support references.
  • Buckle and belt arrangement, rear access and intended use.

Common questions

Which Bronco does this guide cover?

It covers Planted's named full-size 1980-1986 application for original bucket-seat models, with the actual floor attachments and supplied SB256 still to be checked.

Can I use this kit for a truck originally fitted with a bench?

Removing the bench does not establish SB256 eligibility; Planted excludes those models, which need a separate assessment of the actual floor and proposed seat installation.

Does SB256 cover the Bronco II or a later Bronco?

Use a separate fitting check for the Bronco II and other full-size generations, because this guide's SB256 application is limited to the named 1980-1986 original bucket-seat models.

Which side should an LHD driver specify?

State physical left and LHD beside the SB256DR reference. The shop calls that option RHD Passenger Side, so confirm the supplied reference and actual steering arrangement before ordering.

Which reference is physical right?

Physical right uses SB256PA in Standard form or COBRA-SB256PA in Alternate form, with the supplied configuration and any conversion to be checked against the truck.

Does the side choice also select the runner pattern?

The side selection identifies a position. Standard or Alternate needs confirming separately with the chosen runner; the Alternate pattern substitutes Cobra / Scheel-Mann for the Standard Recaro slider pattern.

Are the runner and side supports part of one complete Bronco kit?

Itemise the separate lower bracket, runner and support choices on the quotation according to the actual seat and complete assembly required.

Will every Cobra runner use the same bracket pattern?

Confirm the precise Cobra runner version, its lower bracket connection and upper seat connection: Planted distinguishes Narrow and Wide slider layouts.

When does a fixed bucket need side mounts?

Use appropriate side supports where the actual shell specifies side fixings. Match the shell's permitted hardware and geometry to the support, then check its connection to the runner or lower bracket.

Which fixed buckets are shown?

Try the Corbeau Pro Series X, Corbeau Sprint X System 1 XL and OMP WRC-R with the driver, checking the actual version's mounting method and cab clearance.

Will a recliner preserve the original rear-entry mechanism?

Trial rear access with the complete selected installation. A reclining backrest does not establish that the original front-seat tipping mechanism or its attachments are retained.

Does the RRS pair include fitting assemblies for both sides?

The linked RRS pair needs two separately confirmed lower assemblies with their own upper parts and hardware.

Can existing aftermarket runners be reused?

Send exact references and photographs. Match both fixing interfaces to the proposed seat assembly. Check both runners' locking operation, handle access and the travel needed by the driver.

Will the replacement seat sit lower?

Measure the completed seat, bracket and runner arrangement with the driver, as the lower bracket alone does not establish a fixed height change.

Can the original belt be kept or a harness added?

Have the actual belt attachments, buckle and routing assessed with the selected seat. A harness needs its own suitable anchors, routing and instructions checked for the intended use.

What should I send for a full fitting recommendation?

Send the year, chassis, original seating, market and actual steering arrangement with mounting photographs. Name the physical side and exact proposed seat and upper parts. Include restraint details, rear-access requirements and intended use.

Garreth’s top tip

I would try the chosen seat for entry and exit before settling the order. Compare how the bolster supports you with how easily you get into the Bronco. Have the preferred seat and full fitting assembly quoted together.

Cameron’s fitting view

Start with the manufacturer’s original bucket-seat application and the actual mounting area. Put the physical side and complete bracket reference beside the chosen runner pattern. Trial rear access and the restraint arrangement with the selected seat fitted.

Plan your Ford Bronco third generation (1980-1986) seat change

Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Application references: Planted physical-left Bronco bracket, physical-right bracket, installation guidance and Ford third-generation Bronco history.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text