Dodge Challenger 2008 Onwards Bucket Seat and Fitting Guide
Choose each side of the pair before choosing the trim
If you are planning seats for a Challenger, we would start by writing down the build year and each physical side. Planted lists a left-side bracket from 2008 onwards, with two different right-side applications. The year split belongs in the right-side choice before the pair goes on a quotation.
Garreth would also ask how often you use the rear seats before choosing a fixed bucket or a recliner. Cameron would put the correct left and right parts alongside the chosen seats and runners. Tell us the actual steering side, particularly if the car has been converted.
At a glance
- The maker lists SB095DR for the physical left from 2008 onwards.
- The physical right uses SB095PA for 2008-2011 or SB095.1PA for 2012 onwards.
- A pair needs the left part and the appropriate right part, specified separately.
- Confirm the exact Standard or Alternate slider pattern with the runner you choose.
- Include rear-seat access and recline-control clearance in the position trial.
- Measure the complete seat and lower assembly; a bracket listing does not give a net lowering figure.
Identify the car, build year and physical side
Send us the build details, original market and exact model with photographs of the existing fittings. Use physical left and right as the common reference. The Driver and Passenger names in Planted’s application describe its left-hand-drive arrangement.
Our shop options use right-hand-drive side names, so put the complete maker reference on the quote.
For a left-hand-drive car, the physical left is the driver’s position. On a right-hand-drive conversion the driver sits on the physical right. Check the actual floor and lower connections if the seating has been altered.
An original 1970s Challenger needs its separate fitting application.
Line up the two sides of the installation
Use the table to identify the maker reference for each position. Confirm the actual car against the current application before ordering. For a pair, list the two required sides individually.
The right-side year split does not change the left-side reference shown here.
| Physical side | Maker application | Full maker reference |
|---|---|---|
| Left | 2008 onwards | SB095DR |
| Right | 2008-2011 | SB095PA |
| Right | 2012 onwards | SB095.1PA |
Specify the left-side SB095DR bracket
The maker’s physical left-side application is SB095DR from 2008 onwards. The current shop listing below has that exact supplied variation. Its right-hand-drive Passenger option identifies the physical left.
Tell Cameron the full seat and runner references with that side. The bracket connects the car floor to the seat assembly, so the upper connection still needs matching. Garreth would settle the seat shape and access before choosing the trim.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Choose SB095PA for the 2008-2011 right side
For the physical right on a 2008-2011 car, Planted names SB095PA. Our current early-car listing supplies that reference under its right-hand-drive Driver option. Check the build details when a car is close to the application boundary.
In a left-hand-drive Challenger, this is the passenger position.
Specify its seat and adjustment requirements separately from the left. Cameron would confirm the complete lower package for that position. A pair should be quoted as two identified assemblies.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Use the later right-side SB095.1PA reference
The physical right-side application changes to SB095.1PA for 2012 onwards. Our later-car listing below has that exact current variation. Pair it with the appropriate left-side SB095DR assembly after the actual car is checked.
The different suffix identifies the right-side application.
Confirm the build and physical side on the quotation with Cameron. Add the selected seat, upper supports and runner references. Those choices determine the complete package and installed position.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare the Cobra reclining-seat shapes
The Daytona has an integrated head restraint and recline adjustment on both sides. Try that shape if you prefer the backrest and head restraint in one outline. Include the control clearance beside the door and tunnel in the position trial.
Cobra gives the Le Mans a tip-forward backrest as well as its reclining adjustment. That makes it a useful starting point when rear-seat access matters to the installation. Test the release and the complete seat movement in the Challenger.
The Le Mans Heritage brings period styling to a reclining seat. Try its bolster shape alongside the Le Mans before deciding on the cabin finish. Garreth would choose from comfort and access first, then work through the trim with you.
Cameron would quote the chosen seat version with its exact runner and bracket pattern.
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £619.00 Incl. VATFrom £515.83 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £649.00 Incl. VATFrom £540.83 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match the slider bolt-pattern version
Planted offers Standard and Alternate bolt-pattern versions. Its Standard pattern includes the Recaro slider connection, while Alternate provides the Cobra and Scheel-Mann pattern instead. Confirm the exact runner and bracket version together.
The maker distinguishes Cobra’s narrow and wide runners. A wide Cobra runner needs its specified Alternate connection or the maker’s described modification to Standard. Do not order from the seat brand alone.
Garreth would put the seat and complete mounting package on one quotation. Cameron would then check both the seat-side connection and the bracket-side connection with the actual runner. Include the control position and locking action in that check.
Specify the Cobra runner width and lower connection
If you choose a Cobra seat, include the exact Cobra runner in the enquiry. Planted’s narrow and wide runner distinction changes the required lower pattern. Ask us to confirm the supplied runner version against its current instructions.
The premium runner listing below needs that same complete-package check.
Trial access to the adjustment control with the seat in place. Check the lock through the travel you intend to use. Garreth would settle how the seat feels in that position before choosing its finish.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Include the exact Sparco runner in the quotation
Our Sparco runner listing below is an adjustment option to check with the chosen seat. Identify its full reference and the version of the Planted bracket. The slider must connect to both components in the completed assembly.
Check the handle position and usable locking range during the position trial. Include any upper supports needed by the seat. Cameron would check the actual fixing pattern before you order the separate parts.
Choose the fixed seat around support and access
The Sparco Sprint, Cobra Monaco Pro and BRIDE ZETA IV give you three fixed seats to discuss. Try the cushion and bolsters with the way you get into the Challenger in mind. Match the exact seat version to its intended upper supports or base connection.
Garreth would spend time getting in and out before deciding on a shell. Cameron would trial the complete seat width, shoulder area and backrest against the door and tunnel. Check both seating positions individually if you are changing a pair.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,211.39 Incl. VATFrom £1,009.49 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match upper supports to the chosen shell
A side-mounted shell needs supports that match the seat’s mounting points and the lower adjustment mechanism. Confirm their full references together. Work from the selected seat and support instructions when specifying the fixings.
The Sparco steel side-mount listing below is an option to check for that exact package.
Do the shell and lower-hardware trial before finalising the seated position. Include the supports in every height and clearance measurement. A matching brand name alone cannot confirm the complete connection.
Compare the ZETA IV maker dimensions
BRIDE publishes 560mm outer shoulder width, 460mm lower front width, 890mm overall height and 710mm side-view length for this ZETA IV drawing. Compare those separate measurements with a seat you have tried. They describe the seat’s outer size.
Use the exact shell version and the completed lower hardware for a clearance trial.
Cameron would measure the shoulder area and lower bolsters against the Challenger’s door and tunnel. Check access as well as the final seated position. Outer width does not identify the space available for your hips or establish cabin clearance.
Include rear-seat access in the trial
If people use the rear seats, try the complete entry route before choosing the front seats. Include the backrest release, its forward movement and the available sliding travel. Check the seat with the door open and with the front position set for its usual occupant.
Recline adjustment and a tip-forward backrest are separate features.
For a fixed bucket, work through rear access with the actual proposed assembly. The bracket’s ability to carry the seat does not settle that practical choice. Garreth would want you to be comfortable with the way the car will be used before choosing the shell or trim.
Measure the complete driving position
The seat cushion, upper supports and runner all contribute to the completed height. Compare the trial assembly with the original driving position. Our three bracket listings do not give a guaranteed lowering figure.
For the driver, make the trial with the footwear and posture normally used in the car.
Check full pedal movement, wheel reach and backrest angle with the assembly secured in its intended position. Repeat the clearance checks through the useful sliding range. Cameron would also check the other seat separately when specifying a pair.
Choose the belt with the exact seat and installation
Include the belt you intend to retain or fit in the seat enquiry. Match it to the exact seat’s instructions and check the actual anchorage arrangement. A fitting bracket alone does not establish a harness installation.
Keep the buckle and belt path in the complete position trial.
If you want a competition harness, send Cameron its full reference and the intended anchorages. Follow the seat and belt manufacturers’ instructions for that combination. Check adjustment and routing from the seated position before the installation is put into use.
Lay out the complete assembly before fitting
Identify the physical side, full bracket code and Standard or Alternate version first. Lay out the selected seat, supports and runner against their current instructions. Confirm the supplied fixings and any parts retained from the original seating arrangement.
Trial the completed package before finalising its position.
Use the component manufacturers’ assembly procedure and fixing specification. Check adjustment and locking after the assembly is secured. Send us photographs if a reference or connection is unclear, so we can confirm the intended combination with you.
Common questions
Which Challenger does this guide cover?
It starts with Planted’s applications for the Challenger from 2008 onwards. Send the actual build details and model before ordering the complete package. An original 1970s car needs its separate fitting application.
Which part is for the physical left?
The maker lists SB095DR from 2008 onwards. Our current matching shop variation uses the right-hand-drive Passenger option. Confirm that full reference with the actual car and seat.
Which part is for the physical right?
Use SB095PA for the maker’s 2008-2011 application or SB095.1PA for 2012 onwards. Check the build details before choosing the right-side assembly. Both current shop variations use the right-hand-drive Driver option.
Does the 2012 split apply to both sides?
The maker’s left-side reference remains SB095DR in the applications used here. The split shown in the table is on the physical right. Specify each side separately when quoting a pair.
What if the car is left-hand drive?
In a left-hand-drive car, the physical left is the driver’s position and the physical right is the passenger’s. Use the maker references and physical sides with us. The shop’s right-hand-drive option names describe the other steering arrangement.
Can I order two brackets from the same listing?
Identify the left part and the appropriate right part first. Each of the three current listings here has one side-specific variation. A pair should be quoted as two identified assemblies with their seats and runners.
Which Cobra recliner should I start with?
Try the Daytona with its integrated head restraint alongside the Le Mans and Le Mans Heritage. The Le Mans has a tip-forward backrest worth testing when rear access matters. Choose from comfort and access before settling the trim.
Which slider pattern do I need?
Match the exact runner to Planted’s Standard or Alternate version. Cobra narrow and wide runners need different checks at that connection. Ask Cameron to confirm the full runner and bracket references together.
How much lower will the seat sit?
Measure the complete seat, cushion and lower hardware against the original position. The bracket listing alone does not give that result. Trial pedal reach, wheel access and clearance with the intended user.
Can I use a fixed bucket seat?
Specify the exact shell, upper supports or base connection, and any required runner. Trial the full assembly in the Challenger. Include rear-seat access in the decision if people use the back seats.
Do the ZETA IV measurements prove it fits?
They describe the maker’s outer seat dimensions. Cabin clearance and occupant fit need their own checks with the exact shell and mounting assembly. Try the seat before choosing it.
What should I send for a complete recommendation?
Send the build year, model and steering side with photographs of the original fittings. Add the exact seats you want, the two physical positions and the adjustment or rear access you need. Garreth and Cameron can then work through the complete package with you.
Garreth’s top tip
Garreth would settle how the Challenger will be used before choosing the seat shape. If rear access matters, try the actual release and movement with the proposed front seats. Once comfort and access are right, choose the trim that suits the cabin.
Cameron’s fitting view
Cameron would put the full left and right maker references on the quotation, with the build details beside them. The right-side year split belongs in that check. Match the seat, upper supports and runner to each bracket, then trial the completed position in the actual car.
Plan your Dodge Challenger from 2008 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Manufacturer references: Planted application guide, left-side SB095 application, 2008-2011 right-side application, 2012 onwards right-side application and installation instructions; Cobra Daytona, Le Mans and Le Mans Heritage; BRIDE ZETA IV dimension drawing.






