Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Ford Crown Victoria 1998-2012 Bucket Seat Guide

Choose the support, then match the Crown Victoria fittings

The Crown Victoria’s seat change starts with the position you want to drive in. Our Planted SB202 listing gives the vehicle bracket for the maker’s 1998-2012 application. We would plan the selected seat and every fitting beneath it together.

Garreth would try the support of a fixed bucket against the movement of a recliner for the car’s normal use. Cameron would first record the actual year, original seating arrangement and physical side. Include photographs of the existing front seats and mounts before choosing the parts.

Front three-quarter view of an illustrative modified dark Ford Crown Victoria sedan with lowered suspension, silver performance wheels, black racing bucket seats and yellow harnesses
Illustrative modified Crown Victoria, not a customer installation.

At a glance

  • Application title: Ford Crown Victoria 1998-2012, as listed by Planted. Give us the car’s actual model year and original front-seat details.
  • Bracket family: SB202; the current manufacturer references are SB202DR for physical left and SB202PA for physical right.
  • US Driver / Left and Passenger / Right labels need matching to the actual driving side of the car.
  • Confirm the exact runner and Standard or Alternate slider pattern together. Runners and supports are separate parts to assess.
  • Original bench or separate-seat layouts, adjustment equipment and any retained console need checking on the actual car.
  • The 345mm x 271mm scale drawing describes Sparco seat-side centres, separate from Crown Victoria floor holes.

Start with the original seats and equipment

The year range in this guide follows Planted’s SB202 application title. Use the car’s actual model year and market when confirming the order. A model label does not establish the parts already fitted to an individual car.

Ford’s 2011 owner guide distinguishes standard bucket seats from optional bench seats in its Severe Duty section. That gives a practical reason to photograph the existing arrangement. Cameron would confirm what is retained before matching the aftermarket bracket and upper fittings.

Record a powered or manual adjustment mechanism, a centre armrest or console, and any previous changes around the mounts. If equipment has been added or removed, show the remaining connections clearly. Garreth would include the passenger use and adjustment the owner wants to keep in the seat plan.

Use SB202 for the confirmed vehicle connection

Our current Crown Victoria bracket listing carries SB202. Planted’s live physical-left entry is SB202DR and its physical-right entry is SB202PA. Both manufacturer entries name the Crown Victoria 1998-2012 application.

For a left-hand-drive car, the driver occupies the physical left, corresponding to the maker’s Driver / Left label. A right-hand-drive car’s driver occupies the physical right. Our shop options use RHD wording, so Cameron would confirm the physical side as well as the driving side before ordering.

The vehicle bracket is one part of the aftermarket-seat assembly. Check the actual package against the selected runner, supports where needed and mounting hardware. The family reference alone does not establish that those separate fittings are included.

Confirm the slider pattern with the runner

Planted offers Standard and Alternate bolt patterns. Standard includes the Recaro slider pattern; Alternate replaces it with the Cobra and Scheel-Mann pattern. Current variants also show COBRA-prefixed SB202 references.

The maker’s notes distinguish Cobra narrow and wide runner arrangements. Match the exact runner version and required bracket option before completing the order. Our shop card presents side choices, so include the slider-pattern requirement in the enquiry.

Cameron would identify the seat’s upper connection separately from the runner’s connection to SB202. A shared nominal dimension at one interface cannot confirm every other fixing. Keep the seat and runner drawings alongside the vehicle-bracket reference.

Compare Sprint, Sprint Sky and Sprint L

Sprint and Sprint Sky offer two finishes on a fixed-back family, with Sprint L providing the larger version to try. Garreth would compare cushion and shoulder support before choosing upholstery. Try normal entry and exit with the bolster beside you.

The cited Sparco catalogue gives the illustrated Sprint and Sprint Sky families 345mm x 271mm lower fixings and 290mm lateral spacing. Confirm the exact supplied version and its instructions before choosing lower or side fixings. Those measurements describe the seat connection, separate from the Crown Victoria interior.

Trial the actual shell with its complete lower assembly in the car. Include door clearance and buckle access with the driver seated. Cameron would also check anything retained between the front seats before settling on the shell and its position.

Connect a side-mounted shell through its supports

The Sparco steel side supports shown here are an option to discuss for a shell using lateral fixings. They connect the seat through its sides, with the support base joining the confirmed lower assembly. Follow the exact shell and support instructions when selecting holes and inclination.

Planted describes different arrangements for side-mounted seats with and without sliders. A fixed arrangement can require a new bracket hole pattern. Cameron would confirm the final position and hardware before any bracket modification.

Choose sliding adjustment with both connections checked

The current Sparco runner card carries 0049306. It is a separate sliding option to discuss for the Sparco examples above SB202, with upper and lower connections checked together. Planted lists Sparco among the slider brands accepted by its slotted bracket family.

Confirm the actual runner version and its handle position before assembly. Check what is already supplied so that another set is not ordered by default. Cameron would trial parallel movement and the release and locking action through the useful travel.

Garreth would include the cushion and all lower fittings when trying the driving position. Check wheel and pedal reach with the driver seated normally. The bracket and runner names cannot predict the finished cushion height.

Sparco lower fixing centres at one scale

Sparco’s cited catalogue gives 345mm across and 271mm front to rear for the illustrated lower-fixing arrangements used by Sprint, R100 and R333 families. The drawing keeps both dimensions at one scale. Its outer frame outline is schematic.

These are seat-side centres, separate from Crown Victoria floor holes and Planted’s full slotted layout. Match the exact seat, runner and supports against their own drawings. Measure outside seat width and room to operate the controls separately in the car.

Seat-side bolt centres 345 by 271 millimetres, drawn to scale345mm across271mm front to rearSeat-side bolt centres; outer frame outline is schematic

R100, R100 vinyl and R333 reclining choices

The R100 fabric and vinyl choices give two finishes of a reclining family, while the R333 has a different bolster and cushion shape. Garreth would compare the support and ease of getting into each. Operate the backrest through the range needed for the car’s use.

Sparco’s catalogue gives the R100 family and R333 345mm x 271mm lower fixings. Confirm the exact supplied seat, runner and SB202 pattern as a complete assembly. Shared seat-side centres do not establish cabin clearance or a height change.

Cameron would try the reclining controls beside the tunnel, door and any retained console. Check the space behind the backrest as it moves. Include the required passenger use in the final trial before tightening the assembly.

Choose the belt layout with the seat

The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.

Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.

Trial the vehicle bracket before completing the assembly

Begin with the actual floor mounts and a record of earlier changes. Planted’s guidance calls for checking the components and trial-fitting the vehicle bracket before assembling the complete seat. Identify retained parts and required fasteners from the current vehicle and kit instructions.

Follow the appropriate Planted arrangement for lower or side fixings, with or without sliders. The maker describes assembling the confirmed components outside the car before trialling the complete seat inside it. Keep the chosen seat and runner instructions available at the same time.

Identify the attachment and hardware for the belt buckle or retained belt arrangement. The seat bracket does not establish a complete harness installation. Cameron would check buckle access with the driver seated.

Check the wheel, pedals, headroom and clearance beside the door and tunnel in the intended position. Operate the rails and reclining controls through the movement required. Garreth would try entry and exit, while Cameron would repeat adjustment and locking checks after final tightening.

Common questions

Planted names Ford Crown Victoria 1998-2012 in both cited physical-side entries. This guide follows that bracket application title. Give the actual car’s model year, market and original-seat details when confirming the supplied parts.

The original arrangement needs checking alongside the vehicle year and mounts. Ford’s 2011 Severe Duty section distinguishes optional bench seats from standard bucket seats. Send photographs so the actual car and retained equipment can be assessed before ordering.

The cited left reference is SB202DR and the right reference is SB202PA. Planted uses US Driver / Left and Passenger / Right labels. Match the physical side and actual driving side, especially when the shop options use RHD wording.

Standard includes Planted’s Recaro slider pattern. Alternate replaces it with the Cobra and Scheel-Mann arrangement. Confirm the exact runner, including Cobra narrow or wide requirements, with the supplied bracket option.

Check the actual order contents. Runners, supports where needed and hardware are separate parts to assess for the chosen seat. Complete the parts list before ordering further fittings.

Confirm the proposed complete assembly against what is currently fitted. An aftermarket bracket and separate runner do not establish retention of the original adjustment mechanism. Include the centre armrest or console and its connections in the photographs.

They describe the illustrated Sparco lower seat-side centres. They do not give the Crown Victoria floor pattern, outside seat width or complete Planted slot arrangement. Check the remaining connections and trial the actual seat for clearance.

Planted describes configurations where a new bracket hole pattern is needed, including fixed arrangements. The exact seat and lower components determine the plan. Have the final position and hardware checked before any modification.

The cushion, runner and each lower fitting affect the final position. Trial the complete assembly with the driver and check control reach and headroom. The vehicle application label cannot predict a height reduction.

Garreth’s top tip

Garreth would choose the seat by its support and the movement wanted for normal use. Try the intended size and ease of getting over the bolster before settling on a finish. Include passenger use and the adjustment the owner wants to keep.

Cameron’s fitting view

Cameron would record the actual year and original seating, then identify physical left or right. He would confirm the SB202 option and runner as part of the whole assembly. The final trial establishes posture and clearance that seat-side catalogue dimensions cannot provide.

Plan your Ford Crown Victoria 1998-2012 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted current Crown Victoria physical-left application; physical-right application; Planted installation arrangements; Planted fitting FAQs; Ford 2011 Crown Victoria owner guide, page 289; Sparco 2025 seat and runner catalogue, retained manufacturer dimensions; current linked shop listings.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text