Land Rover Series 3 Bucket Seat Guide
Choose the seat and its Series 3 fitting route together
A Series 3 seat change can be about longer days on country roads, a period interior or more support over rough ground. The first choice is how you want the seat to feel and adjust. Then we match the fitting equipment to the actual vehicle and seat.
We list a Cobra tailored frame and separate Endurance Motorsport Series 3 frames for Sparco and Recaro seat routes. Garreth would try the fixed and reclining options before choosing the trim; Cameron would start with the vehicle year, body and photographs of its current seat box. An older Land Rover may already have replacement seats or altered fittings.

At a glance
- Vehicle: Land Rover Series 3, called Series III in period; Cobra lists the application as 1971 to 1985.
- Cobra route: Series 3 tailored frame, with a matched base-mounted Classic seat or recliner.
- Endurance routes: separate Series 3 Sparco B301243-S3 and Recaro B301244-S3 listings.
- Runners: the Cobra FRM-13 assembly drawing includes Premium runners; confirm the complete Endurance arrangement with the seat.
- Specify the physical seating side, exact seat model and any existing changes to the seat box.
The Cobra Series 3 tailored frame
Our Cobra Series 3 fitting frame is listed as SU-LR-S3. Cobra’s own application sheet identifies Series 3 left and right assemblies as SU-LDR-DEF-02L and SU-LDR-DEF-02R, and its current cross-reference assigns them to FRM-13. Keep the Series 3 application on the order so the correct vehicle version is selected.
Cobra lists its Classic models and reclining models for this application. Garreth would start here for a period interior using a base-mounted Cobra seat. The manufacturer’s compatibility table marks the Nogaro separately as unsupported for Series 3, so the general Nogaro fitting advice on other vehicle pages does not establish this combination.
The tailored frame uses the vehicle’s original mounting positions. Cameron would inspect the existing seat-box fittings before ordering, especially if a previous owner has changed the seats or rebuilt the box. Send photographs with the year, body and chosen seating side.
-
From £255.00 Incl. VATFrom £212.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Identify the runners in the Cobra assembly
Cobra’s FRM-13 drawing at 292mm shows a pair of Premium runners, the narrow handle, a spacer bar and a seatbelt bracket. Our Series 3 frame listing includes the frame and sliding runner. The separate runner card identifies the family of part in that assembly; an extra pair is not a routine addition to an already complete kit.
The maker drawing is arranged for the UK driver’s side. It specifies the spacer and seatbelt bracket on opposite sides for the UK passenger assembly, with the appropriate handed bracket. Confirm the physical right or left seat position instead of treating both assemblies as identical.
Before the final tightening, check that the handle releases both runners and can be reached from the seat. Move the seat through the travel you need while checking the tunnel, door, buckle and controls. The chosen cushion and all the parts below it determine the finished driving position.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Base-mounted Cobra buckets with period styling
The Classic, Classic RS and Classic RSR give three fixed-back shapes to compare within Cobra’s period range. Start with the support around your hips and back, then try getting in and out of the vehicle. A seat that feels useful on rough ground still needs to suit the journeys and access you expect.
Garreth would compare these seats in person before choosing vinyl or a fabric centre. Cameron would confirm the exact Classic model against the Series 3 frame and runner assembly, including any head-restraint choice and clearance to the vehicle’s bodywork.
-
From £249.00 Incl. VATFrom £207.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £409.00 Incl. VATFrom £340.83 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £439.00 Incl. VATFrom £365.83 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Cobra seat-side centres, drawn to scale
Cobra gives 292mm across and 330mm front to rear for its narrow base-mount pattern. Those dimensions describe the seat-side fixing centres in the FRM-13 drawing. They are not the floor-hole spacing of a Series 3, and the pale outer frame below is schematic.
Use the exact seat’s current drawing alongside the frame instructions. Our listing has a 291mm attribute, while Cobra’s own drawing is labelled 292mm; we use the manufacturer’s figure here and confirm the supplied assembly with the seat. A nominal pattern is only one connection in the installation.
The Le Mans reclining route
The standard Cobra Le Mans is the reclining seat shown here, with the Series 3 tailored frame chosen separately. Its adjustable backrest is useful when you want to change your sitting angle on a longer journey. Try the cushion and the backrest together before choosing a finish.
Cameron would check access to the reclining controls and how far the backrest can move in your body style. A hard top, bulkhead or other interior changes can affect the space available behind the seat. Bring photographs and measurements of the actual vehicle.
-
From £619.00 Incl. VATFrom £515.83 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The Series 3 Le Mans seat-and-bracket listing
We also list the Le Mans as a Series 3 seat-and-bracket package. It is an alternative way to order that seat and its application-specific fittings. Confirm the included runner, bracket and seating side together before adding anything else to the order.
Garreth would compare the standard seat plus tailored frame with this package by the parts supplied and the trim you want. The package listing should settle the fitting contents, so another Series 3 frame is not automatically needed beside it.
Endurance’s Sparco Series 3 frame
B301243-S3 is our Endurance Motorsport Series 3 frame listing for a Sparco seat route. Keep the -S3 suffix with the enquiry. The catalogue also has Defender and Land Rover 90 versions, and their names alone do not establish the right assembly for your Series 3.
Tell Cameron the exact Sparco model and whether it mounts through the base or the sides. A base-mounted seat and a side-mounted shell need different connections above the vehicle frame. The current listing does not establish a universal seat-side hole pattern or a complete runner-and-fastener pack, so those details need checking with the proposed seat.
-
From £89.50 Incl. VATFrom £74.58 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Sparco buckets to discuss with the Series 3 frame
The Sprint, Sprint Sky and Sprint Retro give different upholstery choices within Sparco’s fixed-back range. Sky is the vinyl version; compare the coverings and the support shape for the way you use the Land Rover. These are seat candidates to check with the exact Endurance assembly, not a promise of cabin clearance.
For sliding adjustment, ask us to match the runner and its connection to that seat and frame. A side-mounted shell needs its specified side mounts as well. Avoid ordering a universal stack of extra brackets before the seat’s own mounting arrangement is identified.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Plan the Sparco runner as part of the assembly
The Sparco sliding runner is an adjustment option to check with the Sparco-route frame. Confirm its centres, the seat connection, handle clearance and required fasteners before ordering. The runner’s inclusion is not stated in the Series 3 Endurance frame listing.
Garreth would decide whether both drivers need to use the vehicle before choosing a fixed or sliding arrangement. Cameron would then check the complete height and travel, including any side mounts needed by the selected shell.
Endurance’s Recaro Series 3 frame
B301244-S3 is the separate Series 3 listing for a Recaro seat route. The Recaro label is not enough to select every component: send the exact seat model, its mounting drawing and details of any runners you already have.
We would check the seat-to-runner and runner-to-frame connections before calling the kit complete. Do not transfer a Sparco runner or side-mount arrangement to this route without checking the actual holes and hardware. The current Endurance listing does not give us numeric dimensions to draw for this frame.
-
From £93.96 Incl. VATFrom £78.30 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
A Recaro Expert S for a reclining-seat enquiry
The Expert S is a reclining Recaro candidate to discuss if access over a high side bolster is a concern. Try it for back support and access, then confirm the complete Series 3 frame and runner arrangement. Its presence here is a starting point for that check, rather than a claim that the bare seat bolts straight onto the frame.
Cameron would measure the cushion space and the recline movement in the actual vehicle. The diagram below uses Recaro’s maximum cushion envelope as a measuring aid. It is not a Series 3 cabin outline or a hole-pattern drawing.
-
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Measure the cushion and the space above it
Recaro’s Expert drawing gives a maximum cushion envelope of 520mm across by 545mm front to rear, with a maximum backrest height of 820mm. Compare that envelope with the available space, then check the headrest, controls and the seat’s movement separately.
The frame, runner and fasteners sit below the cushion. No installed Series 3 seat height can be read from this drawing; measure the proposed complete arrangement with the driver in position.
Choose the belt arrangement with the seat
The TRS four-point examples and six-point competition option shown here are different belt layouts, not automatic upgrades for every Series 3. Choose the intended use, seat openings and attachment arrangement together. A period low-backed seat and a high-backed competition shell ask different questions of the belt routing.
Garreth would settle the intended road, trail or competition use first. Cameron would check the belt manufacturer’s routing instructions, available anchor positions, buckle access and seat openings before recommending a harness. The seat fitting frame alone does not establish the harness installation.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Work from the existing seat box upwards
Record the vehicle year, body, seating side and any work already done to the seat box. Photograph the original mounts before removing them. On a rebuilt or modified vehicle, those details help identify which parts of the original arrangement remain.
Trial-assemble the correct vehicle frame and the chosen seat connections before final tightening. Check the wheel and pedals, entry and exit, buckle access, runner release and the movement of any reclining backrest. Follow the supplied fitting instructions and use the specified fasteners at each joint.
Keep the Series 3 parts list separate from the Defender and 90 listings until the exact application has been checked. The kit, seat, runner and any side mounts need to form one planned assembly, with the required travel and driving position established in the vehicle.
Common questions
We list the Cobra Series 3 tailored frame SU-LR-S3, plus separate Endurance Motorsport B301243-S3 Sparco and B301244-S3 Recaro frame routes. Match the exact seat model and seating side before choosing the full fitting kit.
Our Series 3 frame listing includes its sliding runner. Cobra’s FRM-13 drawing at 292mm shows Premium runners, the narrow handle, spacer and seatbelt bracket. Confirm the complete handed assembly with your seat; another pair of runners is not a routine addition.
Cobra’s application table lists Classic and reclining models for Series 3 but marks the Nogaro as unsupported. A separate side-mount purchase does not establish that vehicle combination. Send the proposed seat and vehicle details for a different complete fitting arrangement.
The current Series 3 Endurance listings do not establish a complete runner pack. Decide whether you need sliding adjustment, then check the exact seat, runner, frame and fasteners together. Keep the Sparco and Recaro routes separate.
The package listing combines the Le Mans seat with Series 3 application brackets. Confirm the supplied parts, runner and seating side before ordering another frame. The standard Le Mans seat card is the alternative seat-only route.
Use the dedicated Series 3 application when selecting parts. Cobra and Endurance list these vehicle versions separately, so a similar product name does not prove interchangeability. Include the year, body and photographs of existing fittings with the enquiry.
That needs checking in your actual vehicle with the full assembly. Compare the seat’s current dimensions, controls and movement with the available space, then trial the driver’s position. The maker-scale diagrams do not promise cabin clearance.
Garreth’s top tip
Garreth would try a Classic RS beside a Le Mans before choosing the direction for a Series 3 interior. Decide whether you prefer a fixed back or a reclining seat, and how much support you want getting across rough ground. Then compare the coverings and the parts supplied with the fitting route.
Cameron’s fitting view
Cameron would start with the year, body and current seat-box photographs. He would keep the Cobra, Sparco and Recaro routes distinct, identify the actual runner and seat connections, and check the complete assembly for height, access and movement. A rebuild history matters more here than a guess from the badge.
Plan your Land Rover Series 3 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Cobra mounting instructions and frame reference sheet, Cobra application and seat-compatibility table, and the linked current fitting and seat listings. For a reclining-seat shortlist, read our Series 3 reclining-seat article.














