Alfa Romeo 155 Bucket Seat Guide
A touring-car look, with the fitting worked out
The 155’s touring-car connection is part of its appeal: Alfa Romeo won the DTM in 1993 and the BTCC in 1994. A road-car seat conversion still starts with its own floor, driving position and the mountings beneath the seat.
We list both OMP and Sparco vehicle frames for the 155. Cameron would compare the complete mounting arrangements before choosing either one. Garreth would then narrow the seat shortlist to the support and adjustment you want from the car.

At a glance
- Vehicle: Alfa Romeo 155, Tipo 167. Sparco’s application sheet lists January 1992 to December 1997.
- Vehicle frames: OMP HC740 and Sparco 00499002, listed separately for this car.
- Sparco seat-side pattern: 345mm across by 271mm front to rear.
- Runners: the Sparco sheet specifies 00493; OMP’s mounting examples use HC/665. Confirm the current complete assembly.
- Side-mounted buckets need side mounts above the vehicle-specific frame.
The OMP HC740 route
Our OMP HC740 Alfa 155 frame is the car-side starting point, with the seat, any slider and the side mounts chosen separately around it.
OMP’s own mounting examples show a vehicle bracket beneath an HC/665 slider and side mounts for a side-fixed shell. For a seat with lower fixings, the example uses the slider and an optional spacer above the vehicle bracket. These are component arrangements, so we would check the particular HC740, seat drawing and desired position together.
Our HC740 listing records two base-pattern options, including a wider Recaro-type pattern. Confirm the current bracket drawing before selecting that route for a particular Recaro seat. A brand name on a compatibility list does not establish which holes the seat needs.
-
From £72.20 Incl. VATFrom £60.17 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
The Sparco 00499002 route
Sparco’s application sheet lists the Tipo 167 Alfa 155 with frame 00499002 and a 345mm x 271mm seat-side pattern, which agrees with our current vehicle-frame listing.
The same sheet lists Sparco’s 00493 slide runners for this application, instead of the original-runner entry used on the Alfa 145 and 146. Keep that distinction when planning the order. The fact that two cars use a similar seat pattern does not give them the same mounting arrangement.
Order one frame per seat on the correct side, and include the car’s steering side and proposed seat model when asking us to confirm the complete kit.
-
From £87.00 Incl. VATFrom £72.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Decide how much adjustment you need
The OMP HC/665 runner is the sliding component in OMP’s published mounting examples. Our current OMP slider-and-runner listing is HC0-0665. It is a useful part to compare for an OMP-based assembly, with the fixing layout checked against the actual frame and seat.
For a Sparco-based assembly, use the application’s 00493 reference when checking the current runner choice with us, including any proposed replacement that has a different part code.
Cameron would measure the finished height and the adjustment each driver needs. Garreth would settle those details before choosing a fixed position or adding sliding adjustment. A shared car needs both drivers to reach the controls comfortably.
The Sparco pattern, drawn to scale
The four centres below show the Sparco 00499002 seat-side pattern at the same scale in both directions, with a schematic outline separate from the Alfa floor measurements.
Use the drawing for the actual seat and mounting components when checking the assembly. OMP’s catalogue uses 345mm x 270mm for its Type Y bottom-fixing reference. Have us check the relevant connection before treating that dimension as a match for the selected parts.
Fixed-back seats for a focused 155
With base and side mounting options in their current listings, the steel-frame Sparco Sprint, Sprint L and OMP TRS-X offer different driver sizes to compare before considering another shell.
The Sprint’s current waist guide is 32 to 36 inches; the Sprint L’s is 40 to 42 inches. The TRS-X listing covers 28 to 32 and 32 to 36 inch ranges, with the version checked for the driver. Compare the outside shoulder and base dimensions with the cabin as well as the space inside the seat.
These are seats to measure with the proposed assembly. Confirm the current fixing drawing and hardware before ordering. If you choose a side-mounted composite shell instead, include the side mounts in the height and clearance check.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Recliners for a road-going 155
The Sparco R100, R333 and GT list a 345mm x 271mm base pattern, making them candidates to compare with the Sparco frame and specified runner route once the complete installation and cabin measurements are checked.
Try their cushion and backrest shapes. The R333 and GT listings give a 32 to 36 inch waist guide and an under-six-foot height guide, while the R100 has broader listed size guidance. A published range helps choose seats to try; it does not establish their installed fit in the Alfa.
For a regularly driven saloon, Garreth would give backrest adjustment and ease of entry the same attention as lateral support. Cameron would check the space for the controls with the door closed.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £449.47 Incl. VATFrom £374.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
£562.10Original price was: £562.10.£505.90Current price is: £505.90. Incl. VAT£468.42Original price was: £468.42.£421.58Current price is: £421.58. Excl. VATPayPal CreditKlarna ReadyAdd to basket
Harness choices start with the seat and its mountings
The three reclining seats list four-point harness compatibility. Our bucket shortlist has six-point compatibility listed, with four-point compatibility also stated for the TRS-X. Match the belt to the particular seat and then check the fixing arrangement in the car.
The TRS Clubman clip-in and bolt-in four-point belts have different end fittings; both listings say they are not HANS compatible. The Schroth Profi 3×2 is a six-point, HANS-friendly option for a suitable seat and complete installation, including crotch-strap provision.
Send a photograph of the area behind the front seats before choosing a belt. Follow that harness’s manufacturer instructions for the mounting route. A harness bar or cage tube is a mounting location only when its maker specifies that use.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Check the complete driving position
Measure the proposed seat’s width at the base and shoulders against the door trim and centre tunnel, then check your headroom at the intended driving position. Include the frame, runner and mounts in that measurement.
For a shared car, repeat the adjustment check for both drivers. Keep room for the slider handle, recliner controls and the normal movement of the seat. The finished assembly determines the height, so we would not promise a lower position from the frame alone.
Common questions
The OMP HC740 and Sparco 00499002 vehicle-specific frames. Choose the complete mounting arrangement with the seat and required adjustment, then confirm the appropriate side.
Do not assume so. Sparco’s application sheet lists 00493 runners for the 155 and an original-runner arrangement for the 145 and 146.
OMP uses HC/665 in its published mounting examples, and we list the current HC0-0665 slider kit. Confirm the actual frame and seat drawing together before completing the order.
Our OMP listing records a wider Recaro-type base pattern, but the current bracket drawing and exact seat fixings need checking together. We would confirm that pairing before recommending the fittings.
Yes, as a complete matched arrangement with suitable side mounts above the vehicle frame. Include those mounts and any slider when checking the finished height and shell clearance.
The car’s year and steering side, the seat model, photographs of the current floor fittings and runners, your height and waist, and whether the car needs adjustment for more than one driver.
Garreth’s top tip
I would choose the frame and seat together. For a 155 that does road miles, try the reclining seats as well as the buckets before committing to the touring-car look.
Cameron’s fitting view
I would check the runner reference and seat drawing before making up the order. The Sparco 155 application differs from the 145 and 146, and the extra fittings affect the finished driving position.
Plan your Alfa 155 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Technical references: Sparco application sheet, page 14 and OMP 2024 catalogue, printed pages 68, 69 and 75. Confirm the current parts for your car. For the 155’s touring-car history, see Alfa Romeo’s racing-history account.









