Porsche Cayman 981 Bucket Seat Guide: Frames, Seats And Harnesses For The 2012 To 2016 Cayman
A Cayman 981 owner rang us with three questions: what they need to fit bucket seats in place of the factory seats, which frames fit, and what happens to the wiring in the factory seats when they come out. You need a frame and a seat, plus a harness if you want one. Cobra make a direct fit frame that names the Cayman 981, so that's where we start.
- Prices read from the live site on 3 November 2026, inc VAT
- One frame that names the Cayman 981 by generation
- Two six point harnesses that name the 981 GT4
- Anything a listing does not confirm for a 981 is marked: ask us

Start with the Cobra Cayman 981 frame, then choose the seat to bolt to it
£255inc VAT
This is the only frame we list that names the Cayman 981 by generation.
- Cobra's Cayman 981 (2012 to 2016) Direct Fit Subframes, part SU-PO-CAY981, are base mount on a 291mm x 330mm bolt pattern and come for the RHD driver side, passenger side or as a pair.
- Fixed-back buckets mount on side mounts between seat and frame. Reclining sport seats such as the Cobra Daytona bolt on by their base.
- Two six point harnesses name the 981 GT4, both FIA 8853-2016 and both HANS specific.
- The factory seats carry wiring for the systems built into them, so talk to a Porsche specialist about that loom before the seats come out.
The frame that fits the Cayman 981
A bucket seat won’t bolt to the factory floor on its own. It needs a frame that picks up the factory mounting points and puts the seat where you want it. On the 981 Cayman we’d start with the Cobra frame, because its listing names the car and the years, and none of the other frames we list do.
The Cobra Seats Porsche Cayman 981 (2012 to 2016) Direct Fit Subframes are part SU-PO-CAY981. They’re a base mount frame on a 291mm x 330mm bolt pattern, and you choose the RHD driver side, the RHD passenger side or the pair. The listing says frames bolt to the factory seat mounting points, so a standard floor needs no drilling.
Once the seat’s on the frame, check where the seat belt buckle ends up, because a bucket often moves it. If your car’s left hand drive, ask us before you order, as the listing only shows right hand drive sides.
- Part SU-PO-CAY981, Cobra Seats
- Base mount, 291mm x 330mm bolt pattern
- RHD driver side, passenger side or pair
- Listed for the Porsche Cayman 981 (2012 to 2016)
-
From £255.00 Incl. VATFrom £212.50 Excl. VATPayPal CreditKlarna ReadyJust inSelect options This product has multiple variants. The options may be chosen on the product page
Product cards show prices excluding VAT. Prices in the text include VAT.
Cobra also list a Boxster 981 frame, part SU-PO-BOX981, on the same 291mm x 330mm pattern. The two cars share a platform and it’s the sister part, but on a Cayman you want the Cayman frame above. If you ring, that’s the one we’ll point you to.
The Cobra frame isn’t the only option. Planted Technology make a steel bracket for the water cooled Porsches, and Recaro make a frame that’s listed for the Cayman. Neither listing names the 981 generation, so we confirm the exact part with you first: send us the registration or the model year and we’ll name the right one.
Our post on a Boxster 981 with Recaro seats shows the Planted bracket route with Recaro runners, from the seat down to the floor, and Cayman owners ask us for the same sort of build.
-
From £384.00 Incl. VATFrom £320.00 Excl. VATPayPal CreditKlarna ReadyGet notified This product has multiple variants. The options may be chosen on the product page
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
The Planted SB017 bracket is the base part for 1998 onwards Porsches, and its listing says there are suffixed versions, so the suffix is the part we confirm. The Recaro frame is one frame for one side, and Recaro side mounts go between the frame and the seat. The two Sparco parts suit side mount and base mount seats respectively: the steel side mounts work with Sparco, OMP, Cobra and Sabelt side mount seats, and the runner kit bolts to the 345mm x 271mm Sparco base pattern. Recaro’s Double Locking Sliding Runners give 220mm of travel and are priced per runner, one per seat.
If you’d rather not ring, email us or open a chat and tell us the seat you have in mind.
Fixed-back bucket seats for the Cayman 981
A fixed-back seat holds you hardest and suits a Cayman used mostly on track. Headroom matters in a fixed roof car, and more so with a helmet on. Recaro’s frame listing says seat height in a 991 or a Cayman is the difference between a helmet clearing the roof and not. So tell us your height before you choose, and if you’re tall, Garreth will go through which seats keep you clear of the headlining.
-
From £629.00 Incl. VATFrom £524.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,039.50 Incl. VATFrom £866.25 Excl. VATPayPal CreditTop 10 productKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,187.00 Incl. VATFrom £989.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The Cobra Monaco Pro is a steel FIA 8855-1999 seat cut for drivers under 6ft with a 32 to 36 inch waist. It mounts base or side, which suits the base mount Cobra frame. The Cobra Nogaro Club Sport is a fibreglass Road and Track seat for drivers over 6ft, side mount only, with slots for a four or six point harness. The Recaro Pole Position ABE is a fibreglass Road and Track shell for drivers under 6ft, side mount, and the listing says it takes a four point harness. The Recaro Profi SPG is an FIA 8855-1999 side mount fibreglass seat at 6.5kg, with a 32 to 36 inch waist and six point harness slots.
A side mount only seat needs side mounts between seat and frame, and which ones depends on the seat you pick and the frame under it, so we’ll work out the combination with you.
Reclining sport seats for a Cayman 981 that sees the road
A reclining seat gives up some hold for a backrest that adjusts, and it suits a Cayman driven every day and taken to the odd track day. The one 981 owners ask us about most is the Recaro Sportster CS. For a car that does both jobs Garreth would start there, or look at the Cobra Daytona if you want the Cobra frame pattern.
-
From £2,163.20 Incl. VATFrom £1,802.67 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,581.30 Incl. VATFrom £1,317.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The Recaro Sportster CS is a base mount reclining seat on a 405mm x 290mm pattern, listed for all heights and waist sizes and for a four point harness. It sits on the Planted bracket with Recaro runners, as in our Boxster 981 post. The Cobra Daytona is a base mount recliner on a 291mm x 330mm pattern, the same pattern the Cobra Cayman 981 frame lists. It’s 865mm tall and 13.5kg. The Sparco R500 is a cloth reclining seat on a 345mm x 271mm pattern, with no head support wing. The Bride Stradia III is a base mount reclining seat in an FRP or Super Aramid shell, with a low or standard cushion.
The Sparco R500’s pattern isn’t the same as the Cobra frame’s, so ask us which frame or runner it goes on before you order, and do the same for the Stradia III.
Harnesses for the Cayman 981
Two six point harnesses in our range name the 981 GT4. Both are FIA 8853-2016 with 2 inch shoulder and lap straps, and both are HANS specific. Neither listing names the standard Cayman 981, so we’ll confirm the mounting on your own car before you order. Any harness above three point needs a roll cage or a properly engineered harness bar to anchor to.
The Sabelt Porsche 991 and 981 GT4 six point GT harness is part 2100162. It has Silver series hardware with a pull-down lap adjuster in the lap tongue and a clip in fitting, and it comes in black, blue or red. If you want one colour and Porsche mounting geometry, this is the one Garreth would buy.
- Part 2100162, Sabelt
- FIA 8853-2016, 2 inch straps, HANS specific
- Six point, clip in, aircraft style buckle
- Black, blue or red
-
From £450.00 Incl. VATFrom £375.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The Schroth Porsche 6 Point 2×2 is part 94700. The listing says it is made to the mounting geometry of the 996 and 997 all models, the 981 GT4 and the 991 GT3, with 2 inch shoulder and lap straps and a clip in fitting. It comes in five colours.
- Part 94700, Schroth Racing
- FIA 8853-2016, 2 inch straps, HANS specific
- Six point, clip in, aircraft buckle
- Black, blue, red, silver or yellow
-
From £635.35 Incl. VATFrom £529.46 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The Custom Cages Porsche Cayman Multipoint T45 roll cage kit is a weld in kit built for the Cayman shell. Its listing does not name the generation, so ask us to confirm it for a 981.
Fit table for the Cayman 981
| Part | What it is | Mounting detail | For a 981 |
|---|---|---|---|
| Cobra Cayman 981 frame | Direct fit frame, RHD driver, passenger or pair | Base mount, 291mm x 330mm | Named for the Cayman 981, 2012 to 2016 |
| Cobra Boxster 981 frame | Sister part for the Boxster | Base mount, 291mm x 330mm | Cayman owners order the Cayman frame |
| Planted SB017 bracket | Steel bracket, driver or passenger side | Bolts to factory mounting points, suffix by model year | Send registration, we name the suffix |
| Recaro Audi TT, 911 991, Cayman frame | One frame, one side | Recaro side mounts go between frame and seat | Ask us to confirm for a 981 |
| Sparco FIA steel side mounts | Side mounts for one seat | Suit Sparco, OMP, Cobra and Sabelt side mount seats | For side mount seats only |
| Sparco runner kit | Runner for a base mount seat | 345mm x 271mm pattern, one seat | Base mount seats on that pattern |
| Recaro double locking runner | Runner, 220mm of travel | Priced per runner, one per seat | Used on the Planted route in our Boxster 981 post |
Everything marked ask us is a part where the listing does not name the 981 generation.
Common questions
Can I bolt a bucket seat straight to the factory mounts?
No. The seat needs a frame or bracket that picks up the factory mounting points. The Cobra Cayman 981 frame does that on a 291mm x 330mm pattern.
Can I use the Boxster 981 frame in my Cayman?
The Boxster 981 frame lists the same 291mm x 330mm pattern, but the Cayman frame is the one named for your car, so order that one.
What happens to the wiring in the factory seats?
The factory seats carry wiring for the seat sensors and the safety systems built into them, and unplugging that loom can bring on a dash warning light. We are a seat supplier, so please put wiring and coding questions to a Porsche specialist or your fitter.
Do I need a roll cage for a six point harness?
A harness above three point needs a roll cage or a properly engineered harness bar to anchor to. The Custom Cages Cayman T45 kit is weld in, and we confirm it for a 981 before you order it.
Which seat suits a tall driver in the Cayman?
The Nogaro Club Sport and Profi SPG are listed for drivers over 6ft. The Sportster CS and the Cobra Daytona are listed for all heights. Give us your height and Cameron will talk you through how the seat sits under the roof.
Can I fit just one seat?
Yes. The Cobra frame is sold for the driver side, the passenger side or as a pair.
Which seat would Garreth pick for a Cayman used on the road and on track?
Garreth’s pick is the Recaro Sportster CS, because it reclines and still holds you through a corner. Ask us for the bracket and runners that go with it.
Is the Recaro frame right for a 981?
The listing names the Cayman but not the generation, so ask us to confirm it for a 981 before you order.
What we would buy
Garreth
Garreth's top tip
For a Cayman 981 that does track days and the school run, I'd take the Cobra Cayman 981 frame with the Cobra Daytona. The listings share a 291mm x 330mm pattern, and the seat reclines.
If it's mostly a track car, I'd put a fixed-back shell on the same frame with side mounts, and add the Sabelt harness that names the 981 GT4.
Cameron
Cameron's fitting view
I like that the Cobra frame names the 981 and bolts to the factory points. Once the seat's on it, have a look at where the belt buckle lands and how a helmet sits against the roof.
Tell us your height and the seat you've got in mind, and I'll list the mounts or runners that go with it.
Not sure which frame and seat suit your Cayman 981?
Tell us your registration, your height and the seat you like. Cally, our digital receptionist, takes your details, and Cameron comes back to you with the frame, mounts and runners that go with it.












