Fiat 500 Bucket Seat Guide
Start with the 500’s body, seating side and original equipment
For the modern 500, the fitting choice starts beneath the original seat. Sparco and OMP list vehicle adaptors, Planted distinguishes side and subwoofer versions, and Recaro has a seat-specific Sportster application. Record the year, body and physical seating side before choosing the replacement seat.
Garreth would compare the cushion and bolster shapes of a bucket with the movement of a recliner. Cameron would identify the actual vehicle base, runner and any side supports as one assembly. For an Abarth, use the Abarth fitting discussion with the exact badge and variant details; shared styling does not settle the parts list.

At a glance
- Sparco’s type 312 500 application lists 00499017DX and 00499017SX from 2007, runner 00493 and 345mm x 271mm seat-side centres.
- Sparco lists 00499120DX separately for the right-side subwoofer configuration.
- OMP’s current physical-left and physical-right references are HD0-0871-L and HD0-0871-R.
- Planted’s right-side bracket depends on whether a subwoofer is beneath the seat; its Standard and Alternate slider patterns differ.
- The plain Sportster CS hatchback row excludes the folding-roof 500C. The exact Recaro seat version and original equipment need checking.
The Sparco 00499017 type 312 application
Our modern 500 base listing carries 00499017. Sparco’s application table identifies 500 type 312 from 2007 with 00499017DX and 00499017SX, runner 00493 and seat-side centres of 345mm x 271mm. DX identifies physical right and SX physical left.
The table has a separate 00499120DX entry for a right-side subwoofer configuration. Photograph any equipment below the seat and confirm the actual base supplied for that side. A 500 badge alone cannot choose between those references.
Cameron would keep the vehicle type, side and runner reference on the same enquiry. Use the current supplied fitting instructions and fasteners. The table describes a mounting application without establishing an installed height or the outside width of a chosen seat.
-
From £113.40 Incl. VATFrom £94.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Confirm both physical sides when ordering the pair
The pair listing carries shop reference 00499017-SX-DX. Check the left and right manufacturer codes in that package against the car, including any right-side subwoofer equipment. A pair listing does not establish that all other seat or adjustment fittings are supplied.
Choose the seat and its mounting method for each position before completing the order. Garreth would include the passenger’s support and entry needs in that decision. Cameron would identify both complete lower assemblies, including any different parts required on one side.
Specify the 00493 runner named by Sparco
Sparco’s vehicle table names runner 00493 for this application. The current runner card shown here carries 0049306, listed separately as Slide Runners KR in the 2025 catalogue. Both catalogue entries give 271mm longitudinal spacing, but they remain separate references.
Cameron would confirm the required current runner and its connection to the vehicle base before completing the order. A shared measurement alone does not establish the full assembly or handle position. Keep the seat, base and runner references together on the enquiry.
Trial the release and locking action with the driver seated. Check that both rails operate together and move through the range you need. Include the runner and all lower fittings when judging the finished cushion position.
Compare Sprint, Sprint Sky and Sprint L
The Sprint is a tubular-frame fixed-back seat to try for its cushion and backrest support. Sprint Sky offers a different upholstery surface, while Sprint L is the larger version. Garreth would sit in the intended size before choosing the finish.
Sparco’s 2025 catalogue identifies lower mounting at 271mm x 345mm and 290mm lateral fixing spacing for the illustrated Sprint and Sprint Sky models. Confirm the exact supplied version and its instructions. Choose the base-mounted or side-mounted arrangement before ordering the parts beneath the cushion.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
R100, R100 vinyl and R333 reclining choices
The R100 fabric and vinyl versions give two finishes of the reclining seat to compare. The R333 has a different bolster and cushion shape to try. Garreth would judge support and getting over the side bolster before settling on upholstery.
Sparco’s catalogue gives the R100 family and R333 271mm x 345mm lower fixings. Match the exact supplied seat and its instructions to the complete lower assembly. Those centres establish one mounting connection without promising cabin clearance or an installed height.
Move the backrest through the range you need and check that its controls stay reachable. Trial the driver’s wheel and pedal reach with the seat in position. Keep any rear-seat access you want in the same check.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £449.47 Incl. VATFrom £374.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Plan the connection for a side-mounted shell
The Sparco steel side mounts shown here are an option to discuss for a seat using lateral fixings. They connect the shell to the lower assembly. Confirm the support reference, hole positions and connection beneath it against the exact seat instructions.
A seat using its lower fixing points does not automatically need side mounts as well. Cameron would identify each connection before completing the parts list. A different competition shell can require its own specific supports.
The 345mm x 271mm seat-side centres
Sparco’s application table gives 345mm x 271mm for the seat-side mounting reference. Its seat catalogue gives the same lower-fixing dimensions for the illustrated Sprint, R100 and R333 families. The diagram draws those centres at one scale.
The outer frame outline is schematic. It gives neither the 500 floor-hole pattern nor the outside width of a seat. Check the exact seat, controls and lower fittings separately when measuring cabin clearance and the finished driving position.
Specify the left or right OMP adaptor
Our OMP 500 listing carries HC871. OMP’s current pages give HD0-0871-L for the physical left, described as HC/871S, and HD0-0871-R for the physical right, described as HC/871D. Both name the new Fiat 500 from 2007.
In a right-hand-drive car, the driver sits on the physical right. Keep that position with the actual supplied code and current instructions. A seat, runner and any side supports still need their own connections checked above the adaptor.
-
From £127.64 Incl. VATFrom £106.37 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare Champ-R, TRS-E Velour and TRS-E Sky
The Champ-R is a fibreglass-shell option with side fixings. The TRS-E choices give velour and vinyl surfaces to compare. Try the support at the hips, shoulders and thighs before deciding which finish suits the car.
OMP’s 2024 table marks Champ-R and the listed TRS-E Velour reference with W side fixings. It marks TRS-E Sky with W and Y, identifying side and lower fixing arrangements. Cameron would match the exact supplied seat reference to its drawing before choosing either assembly.
Garreth would also try getting over the bolster and reaching the backrest area in the 500. A fixed shell keeps its backrest angle, which affects how you use the rear of a three-door car. The product cards give seats to assess, without promising clearance beside the door or tunnel.
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Connect a side-mounted shell through its supports
OMP’s low-profile steel side mounts are a support option to check with a shell using lateral fixings. The seat connects through its sides, and the support base then connects to the confirmed lower arrangement. OMP’s mounting examples show the side supports, optional sliding assembly and vehicle adaptor as separate parts.
Match the exact shell and support instructions, including the fasteners and permitted fixing positions. The bracket name alone cannot predict the final cushion height. Trial the assembled seat with the driver before choosing its inclination.
Add HC0-0665 sliding adjustment when the assembly needs it
OMP describes HC0-0665 as a steel sliding rail kit mounted between the brackets and seat. It is the runner option to discuss for the OMP route when fore-and-aft adjustment is wanted. Confirm the connections, handle position and travel with the selected seat and vehicle adaptor.
Cameron would establish which adjustment parts are actually supplied before adding another set. Include both rail operation and buckle access in the trial fit. The runner and every support beneath the cushion affect the finished driving posture.
Check OMP’s 345mm x 270mm inner interface
OMP’s current adaptor drawing gives inner seat-side centres of 345mm across by 270mm front to rear. The diagram draws that inner rectangle at one scale. The pale outer shape is schematic, with no vehicle floor dimensions implied.
Sparco’s 345mm x 271mm reference is a different stated pattern. Do not treat the one-millimetre difference as automatic interchangeability. Select the actual holes, runner and supports specified for the complete assembly.
Choose the Planted side and subwoofer version
Our Planted listing carries the SB099 family for the Fiat 500 from 2009. The manufacturer identifies SB099DR as physical left. Its right-side options distinguish the taller SB099PA for a subwoofer under the seat from the lower SB099.1PA without that equipment.
Planted’s American driver and passenger labels refer to left-hand-drive positions. For a UK right-hand-drive car, use the physical left or right and record whether a subwoofer occupies the space beneath the seat. Confirm which manufacturer variant is supplied through our shop listing.
The current manufacturer pages also offer Standard and Alternate slider patterns. Standard includes the Recaro slider pattern; Alternate replaces that with the Cobra and Scheel-Mann pattern. Cameron would match the exact slider version and its instructions, including any maker-specific conditions, before completing the order.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match kit 870415-25 to its Recaro seat application
Our Recaro fitting listing carries 870415-25. The Sportster document gives manufacturer reference 87.04.15/-25 for the 500 and 500 Abarth hatchback application. The exact vehicle type, seating side and original equipment must match the full row and its notes.
This document establishes a Sportster family application. We have not extended it to Speed, Expert, Specialist or a fixed-shell competition bucket from the Recaro name alone. Give us the intended seat version so the correct document and lower fittings can be selected.
A Sportster CS enquiry for the hatchback
Recaro’s Sportster document identifies 500 and 500 Abarth type 312 under fitting reference 87.04.15/-25. The row for the seat without an integrated side airbag excludes the folding-roof 500C. Its note 67a also excludes the SAB and Cross SAB seat versions from that particular row.
The same row specifies the two-side-door body and the backrest handwheel on the tunnel side. It offers manual rail arrangements under note 28a, with optional 20mm or 40mm raising arrangements. Confirm the exact seat, rails and supplied kit contents together; these options do not predict the final cushion height.
Cameron would have the original belt, passenger occupancy equipment and relevant seat electronics checked against the complete manufacturer conditions before specifying the installation. A passenger enquiry needs the occupancy condition resolved; otherwise the source limits that route to the driver’s seat. The separate SAB and folding-roof entries need their own exact application assessment.
-
From £1,581.30 Incl. VATFrom £1,317.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Choose the belt layout with the seat
The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.
Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the complete driving position in the 500
Record the year, body, physical seat position and any previous changes to the mounts. Photograph the existing arrangement before selecting the parts. Use the current instructions supplied with the exact seat and vehicle kit, including the required fasteners at each connection.
With the driver in position, check the wheel, pedals, headroom and buckle access. Operate the adjustment through the range you need and check clearance with the door closed. Garreth would try normal entry and exit; Cameron would repeat the movement and locking checks after tightening.
Common questions
Our listing is 00499017. Sparco identifies type 312 from 2007 with physical-right 00499017DX and physical-left 00499017SX, runner 00493 and 345mm x 271mm seat-side centres. Confirm the actual side and supplied assembly.
Sparco lists a separate right-side 00499120DX configuration. Planted also distinguishes its taller physical-right SB099PA with subwoofer from lower SB099.1PA without it. Identify the actual equipment and kit version before ordering.
Use the physical side. Planted’s Driver/Left label refers to the physical left, while a right-hand-drive driver sits on the physical right. Give us the driving side and seat position together.
The cited OMP inner drawing gives 345mm x 270mm; Sparco gives 345mm x 271mm. Confirm the actual seat, runner and support interfaces. A nominal similarity does not establish automatic interchange.
The cited row for the seat without an integrated side airbag excludes the folding-roof 500C. Other seat configurations have separate entries and conditions. Give us the exact body and seat version for the application check.
The source used here establishes the Sportster family application with its conditions. Speed, Expert and Specialist need their own supporting application. A shared Recaro badge does not specify the complete seat-and-kit combination.
The cushion, runner and lower fittings determine the finished position. Trial the complete assembly with the driver and check headroom, control reach and clearance. Neither a seat name nor a base code guarantees a height reduction.
Record the exact Abarth badge, year, roof and original seat arrangement for its own fitting enquiry. We have separate Abarth shop listings and manufacturer applications to check. The standard 500 discussion is not a blanket specification for every Abarth variant.
Garreth’s top tip
Garreth would try the Sprint and R100 shapes before choosing the trim. Keep getting over the bolster and reaching the rear of the three-door car in that comparison. Choose the support and movement you want, then settle the exact fitting arrangement with the vehicle details.
Cameron’s fitting view
Cameron would establish the physical side and any subwoofer first. He would keep the Sparco, OMP, Planted and Recaro references separate and confirm each required runner or support. The final trial establishes the driving position and clearance that a nominal bolt pattern cannot predict.
Plan your Fiat 500 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Sparco application table, 500 type 312; Sparco seat and runner catalogue; OMP left adaptor and right adaptor and pattern; Planted left, right with subwoofer and right without subwoofer; Recaro Sportster document and full notes; current linked shop listings.













