Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Ferrari 360 Bucket Seat and Fitting Guide

Choose the Ferrari 360 seat and its fittings together

A seat change in a Ferrari 360 starts with the driver’s position and the fittings beneath the seat. Our Planted SB159 listing provides the vehicle-bracket route for the maker’s 1999-2005 application. Choose the shell or recliner with the complete lower assembly in mind.

Garreth would try the support and ease of getting into the seat before choosing the trim. Cameron would begin with the exact car, its original seats and the physical seating side. Include photographs of the existing mountings when asking us to match the parts.

Ferrari 360 on track with a helmeted driver
Ferrari 360 Modena on a trackday

At a glance

  • Planted application: Ferrari 360 1999-2005. Confirm the actual car and existing mounting arrangement.
  • SB159DR is physical left; SB159PA is physical right. Our RHD Driver choice is the PA reference.
  • Standard and Alternate are different slider patterns; identify the exact runner before choosing the bracket option.
  • Cobra’s current 360 instruction shows FRM01 at 405mm; match the seat version, physical side and supplied package.
  • The illustrated 345mm x 271mm centres describe the cited lower seat connection, not Ferrari floor holes.
  • Trial the complete assembly for the driver’s position and clearance; keep the restraint arrangement in that check.

Identify the car and its original seating

Use the actual 360 model and build details when asking about the fitting parts. Planted names 1999-2005 in its SB159 application. Include whether the car is a Modena or Spider and photographs of its existing seats.

If the car is a Challenge Stradale or already has factory carbon seats, identify that arrangement with the enquiry.

Show any earlier conversion or changes to the mountings before choosing the lower fittings. We need to match the bracket to the car in front of us. A model-year label alone cannot describe a rebuilt mounting arrangement.

Start with the SB159 vehicle bracket

Our Ferrari 360 Planted listing is the vehicle-specific starting point for the mounting assembly. The current maker reference SB159DR is physical left, and SB159PA is physical right. Each seating position needs the appropriate bracket.

Planted uses US Driver / Left and Passenger / Right names. Our current RHD Driver option is SB159PA, while RHD Passenger is SB159DR. Cameron would match the physical side to the steering side of the actual car before ordering.

Choose the upper fittings with the seat. A base-mounted seat needs its lower connection and runner matched to the bracket; a side-mounted shell also needs suitable side supports. Confirm the supplied contents before adding separate hardware. We would trial the complete assembly for the final driving position.

Match Standard or Alternate to the exact runner

Planted offers two slider-pattern options. Standard includes its Recaro slider pattern. Alternate replaces that pattern with the Cobra and Scheel-Mann arrangement.

Cobra runners come in narrow and wide versions, so the name on the seat does not decide the Planted option by itself. Give us the exact runner reference and handle width with the seat details.

The maker describes different connections where sliders are omitted or another pattern is used. A fixed mounting arrangement therefore needs its own checked connection. Confirm that layout before treating the bracket slots as suitable for every upper fitting.

Choose the seating side on our listing, then confirm the required manufacturer slider pattern with us before ordering.

Check the Cobra 360 assembly with the chosen seat

We also list Cobra Ferrari 360 subframes. Cobra’s current application sheet names SU-FER-360-01L/R and FRM01 for the 360. Its linked instruction shows a 405mm arrangement with Premium runners and a wide handle. Match that assembly to the exact seat and the package supplied under our listing.

The instruction also identifies a spacer bar and a seat-dependent buckle bracket. The UK passenger arrangement reverses the spacer and buckle-bracket positions and requires a left-hand bracket. Ask us to confirm the physical side and supplied parts before choosing this route.

A narrower seat pattern on a product listing needs its own confirmed assembly; we would complete that check before recommending the combination.

Compare the fixed bucket shape and size

The Sprint fabric and Sprint Sky choices offer different upholstery on a fixed bucket family. Sprint L is the larger version to try. Garreth would compare the fit around the hips and shoulders before deciding on the finish.

Sparco’s cited sheet illustrates lower M8 fixings at 345mm x 271mm and lateral fixings at 290mm spacing on the Sprint family. Confirm the exact supplied seat version before specifying the lower or side connection. Its mounting dimensions are only part of the fit check.

Try the shell with the driver’s usual clothing and the access needed over the bolster. Trial the complete assembly beside the door and tunnel. The bracket application is not proof that a larger shell clears the interior.

Choose side supports for the actual shell

The Sparco steel side-mount card is an option to discuss where the selected shell uses lateral fixings. Match the support’s hole spacing to the exact seat. Confirm its connection to the runner or vehicle bracket as well.

The support holes affect the position and angle available during the installation. Try those positions with the complete lower assembly in place. Check that the seat and belt buckle remain usable through the movement required.

Add sliding adjustment where the installation needs it

The Sparco 0049306 runner is a separate sliding option to discuss with the illustrated Sparco seats. The cited catalogue gives it a 271mm longitudinal distance. Confirm its exact upper and lower connections with the selected seat and SB159 bracket.

Cameron would check handle access and locking through the useful travel before settling the final position. Include the runner in the trial alongside any side supports. Check what is already in the order so the same component is not added twice.

Read the seat-side bolt centres to scale

The drawing illustrates the 345mm across by 271mm front-to-rear lower connection given for the cited Sparco seat families, including R333. Its four centres share one drawing scale. The surrounding outline is schematic.

These are seat-side dimensions, separate from the Ferrari floor mounts and the full Planted slot layout. Match every remaining connection to the selected parts. Trial the complete seat assembly for headroom and control reach.

Seat-side bolt centres 345 by 271 millimetres, drawn to scale345mm across271mm front to rearSeat-side bolt centres; outer frame outline is schematic

On a small screen, scroll within the drawing to read both dimension labels.

Compare backrest movement with a fixed bucket

The R100 fabric and vinyl listings give two upholstery choices on a reclining family. R333 has a different bolster and cushion shape. Garreth would try their support and the movement needed for the car’s usual journeys.

The cited R333 009011 sheet gives lower fixings at 345mm x 271mm. Check the exact version of each seat being supplied before choosing its runner. A matching lower pattern does not show that a recliner’s controls or moving backrest clear a particular interior.

Move the actual seat through the adjustment you need beside the door, tunnel and retained trim.

Our separate 360 recliner article and Sabelt GT3 question give other choices to discuss. Confirm their exact seat and fitting combination with us before ordering.

Plan the restraint with the seat

The harness cards distinguish clip-in and bolt-in TRS four-point choices from the Schroth six-point example. Those are different restraint arrangements to discuss for the intended build. A seat’s harness openings do not establish a complete vehicle application.

Match the restraint maker’s instructions to the seat and the proposed anchor arrangement. Send details of any existing harness bar or cage with the enquiry. We would check belt routing and access to the buckle alongside the chosen driving position.

A vehicle bracket or a seat with shoulder openings cannot confirm the rearward belt route on its own.

Trial the complete assembly before settling the position

Identify the original car mounts and confirm the physical side first. Then match the chosen seat to its upper fittings and runner or fixed connection. Follow the component manufacturers’ installation instructions for the actual parts.

Trial the assembly with the driver seated. Check the wheel and pedal reach, then the space around the seat and controls. Include the backrest movement of a recliner and the adjustment wanted on a runner. Use that trial to settle the driving position.

Cameron would record the complete parts list once those connections and the usable position are confirmed. The final result depends on the cushion and every fitting beneath it. A bracket code alone cannot predict the finished seat height.

Common questions

Which Ferrari 360 application does the Planted bracket name?

Planted names Ferrari 360 1999-2005 for SB159. Give the actual model details and photographs of the original seats and mounts. A special variant or a changed mounting arrangement needs its own confirmation.

Which part is for physical left or right?

SB159DR is physical left and SB159PA is physical right in the manufacturer’s entries. Our RHD Driver variation is SB159PA, while RHD Passenger is SB159DR. Match the physical side to the steering side of the car.

What changes between Standard and Alternate?

Standard includes Planted’s Recaro slider pattern. Alternate replaces that pattern with the Cobra and Scheel-Mann arrangement. Confirm the exact runner, including whether a Cobra runner is narrow or wide, before choosing the option.

Can I order the Cobra frame for any Cobra seat?

The current Cobra 360 instruction shows a 405mm FRM01 assembly. Match the exact seat version, physical side and supplied components before ordering. A narrower seat pattern needs its own confirmed arrangement.

Are runners and side supports included?

Confirm the actual package for the chosen seat and physical side. Separate runners, supports where required and hardware need checking against what is already supplied. Complete that list before adding individual fittings.

Do the illustrated seats have confirmed cabin clearance?

Treat the cards as seats to compare with the driver and the actual car. The complete shell, controls and lower assembly need a fit check. Matching bolt centres alone cannot establish that clearance.

What do the scale-drawing dimensions describe?

They describe the cited 345mm x 271mm lower seat-side bolt centres. They are not the Ferrari floor pattern, the full bracket slot layout or an outside shell measurement. Check every remaining connection and trial the seat in the car.

Can the seat stay in a fixed position?

Discuss the fixed arrangement with the component suppliers before selecting it. The seat or supports need a confirmed connection to the vehicle bracket. Removing a runner changes the assembly and requires its own position check.

Will the seat sit lower than the original?

The cushion, bracket and upper fittings all affect the final position. Trial the complete assembly with the driver and the intended adjustment. A bracket reference does not give a finished height reduction.

Can I use a harness with the new seat?

Confirm the exact seat, restraint and anchor arrangement together. The harness openings and a vehicle bracket are only parts of that check. Send details of any existing harness bar or cage with the enquiry.

Garreth’s top tip

Garreth would choose the support and access that suit how the Ferrari 360 is used. Try the exact seat size before settling on upholstery. Keep the backrest movement wanted for normal journeys in that decision.

Cameron’s fitting view

Cameron would confirm the physical side and the complete SB159 fitting assembly before placing the order. He would match the actual seat and runner pattern, including any side supports. The final trial establishes the driving position and clearance that a catalogue bolt pattern cannot show.

Plan your Ferrari 360 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted physical-left application and physical-right application; Cobra application and fitting sheets; Recaro seat-specific application documents; Sparco 2025 catalogue, cited seat and runner dimensions; current linked shop listings.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text