Audi TT Customer Build: Featuring Sparco R100 Vinyl Seats And Harnesses
Customer car, May 2025
This Audi TT Mk1 belongs to one of our customers, and it has just been finished with a pair of Sparco R100 reclining seats in black vinyl and red Sparco four point harnesses. The grey stitching on the seats and the red webbing go well together, and the result is a cabin that looks like it belongs in a car built to be driven.
The seats are only part of it. The engine bay has been properly worked on, the car sits low on a set of multi-spoke wheels, and a rear roll cage with a harness bar finishes the interior. We supplied the seats, the fitting frames and the harnesses, and the customer sent us these photos of the finished car.
- Car: the customer's Audi TT Mk1 coupe
- Seats: a pair of Sparco R100 reclining seats in black vinyl
- Frames: Sparco direct fit Audi TT sub-frames on the 345mm by 271mm pattern
- Harnesses: Sparco four point bolt-in harnesses in red, 2 inch webbing
- Also fitted: sliding runners, a rear roll cage with harness bar and a modified engine

What is on this page
What we supplied
The interior came together from three parts, all Sparco:
- Sparco R100 reclining sport seats in vinyl. Black vinyl trim with contrast stitching, a reclining back and harness slots in the backrest. They are road and track seats, not FIA approved, which is exactly right for a fast road car like this TT.
- Sparco Audi TT direct fit sub-frames. Made for the TT floor, they bolt to the car’s own seat mounting points and carry the seat on the 345mm by 271mm base mount pattern the R100 uses.
- Sparco four point bolt-in harnesses in red. A pair of road and track harnesses with 2 inch shoulder and lap straps, sized to run through the slots in a recliner like the R100.
-
£600.00Original price was: £600.00.£570.00Current price is: £570.00. Incl. VAT£500.00Original price was: £500.00.£475.00Current price is: £475.00. Excl. VATPayPal CreditKlarna ReadySpeed+ ServiceAdd to basket -
From £97.20 Incl. VATFrom £81.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Why the R100 suits a TT
The TT Mk1 has a low roof and a snug cabin, so a slim seat makes life easier. The R100 is about 500mm wide, which lets it sit comfortably in small cars like the TT, an MX-5 or an S2000 without fighting the door card or the centre console. It still has proper side bolsters, so it holds you well when the road starts to twist.
Vinyl was a sensible choice here. It wipes clean, it keeps its look in a car that gets used, and in black with grey stitching it suits the TT’s own interior. The same seat is sold in cloth as well, and there are two waist size ranges listed for the vinyl version, 32 to 36 inches and 36 to 38 inches, so it is worth telling us your size before you order.
How the seats went in
The Sparco TT frames bolt to the factory mounting points in the floor, so there is no drilling. The customer added sliding runners between the seat and the frame, which keep the fore and aft adjustment you need on a road car. That is the usual way to fit a recliner like the R100: frame to the car, runners to the frame, seat to the runners.
The harnesses make the most of the rear cage. The shoulder straps pass through the R100's backrest slots and wrap around the harness bar, which gives them a proper anchor at the right height behind the seats.

One thing to check on any TT: Audi used the TT name on several quite different cars, and the floor mounting points are not the same across generations. Tell us the year before ordering frames and we will confirm the right ones. If you are weighing up other seats for the same car, our guide to reclining seats for the Audi TT Mk1 covers the options.
Red Sparco harnesses built for recliners
The Sparco four point bolt-in harness is a road and track belt. It has 2 inch shoulder and lap straps, a pad across the lap belt, and a push-button clip buckle that works like a normal seat belt. It is not FIA approved and it is not HANS compatible, so it is a harness for fast road cars and track days, not competition.
What makes it a good match for the R100 is the strap width. Narrower 2 inch straps sit neatly in the slots of a reclining seat, which is where a wider competition harness often struggles. Red was the customer’s choice, and it lifts a black interior straight away. Garreth’s advice with any harness is to plan the anchor points first; our guide on how to fit a motorsport harness covers the angles.
The R100 range
The R100 is one of the most popular recliners we sell, and it comes in several finishes on the same frame and bolt pattern:
- Fabric, the classic cloth version
- Vinyl, as in this TT, for easy cleaning and hard wear
- Martini Racing, with the Martini stripes on the backrest
Because they all share the frame and the base mounting pattern, the choice really comes down to trim and looks.
The rear cage and the rest of the build
The rear cage in this TT is a bolt-in design with a diagonal and a harness bar behind the front seats, finished in black. As well as giving the harnesses an anchor, a cage stiffens the shell and adds protection, which is why they are fitted to track cars. It also looks the part through the hatch.
The engine bay has had plenty of attention too, with red coil packs, a polished intake and blue silicone hoses. Add the lowered stance and the wheels, and it is a TT that has been thought through from end to end.

For the TT Mk1 we can supply bolt-in rear cages and full cages from makers including Custom Cages and Safety Devices. Our page on Custom Cages Audi roll cages lists them. If the car will be used in competition, check the cage and the harness against your series rules with your scrutineer before you buy.
Do Sparco R100 seats fit an Audi TT Mk1?
Yes. This customer fitted a pair using Sparco’s direct fit Audi TT sub-frames and sliding runners.
What bolt pattern does the Sparco R100 use?
It is a base mount seat on the 345mm by 271mm pattern, which the Sparco TT frames are made for.
Can you run a harness with an R100?
Yes. The backrest has harness slots made for a four point harness like the Sparco bolt-in belt.
Is the Sparco four point harness FIA approved?
No. It is a road and track harness and it is not HANS compatible.
Do all Audi TT frames fit every TT?
No. The generations have different floor mounting points, so tell us the year before you order.
💬
The seat in this buildSparco R100 vinyl
Slim enough for a TT, easy to keep clean, and ready for a four point harness.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.



