The Nascar 4 Point 50mm is the starting point for four-point harnesses in the TRS Nascar range. Part number 22G450.
Steel adjusters throughout, 50mm (2-inch) webbing, four-point layout: two shoulder straps and two lap straps. Lever-latch buckle, which releases with a push-and-lift action. Road and track approved, not FIA homologated. HANS Friendly, meaning it can be used with or without a head restraint device.
The lever-latch buckle is the defining feature of the Nascar range, and it is what sets it apart from the Magnum and Pro ranges (which use an aircraft rotary buckle) and the Clubman (which uses a push-click buckle). Check your class regulations before choosing the Nascar: it does not carry FIA approval, so it will not pass scrutineering at events where FIA is a minimum requirement.
At £125, this is the most affordable four-point Nascar. The Superlite (22G455, £150) replaces the shoulder adjusters with aluminium. The Ultralite (22G465, £180) takes both shoulder and lap to aluminium. Steel adjusters are adequate for most club-level use and need no special maintenance. Nine colour choices: black, red, blue, green, orange, silver, yellow, Miami blue, and pink.
Have you written anything about this exact product?
Yes, we have covered this exact product: NASCAR Harnesses With HANS Devices: Everything You Need to Know. That is first-hand coverage from our own builds and showroom, not brochure copy.
Is this harness legal for competition?
This one carries Road and Track rather than current FIA homologation, so check your championship regulations before buying it for competition. For road and track day use, that is not a problem. Ask us if you are unsure which your events require.
What does the strap width mean for me?
This is a 50mm harness. The shoulder width choice interacts with whether you run a HANS device, and our guide on 3 inch versus 2 inch harnesses explains which to pick and why.
Do I need a HANS-specific harness?
No. Only 6-point FIA harnesses work with a HANS device: not 4-point belts, and not road harnesses, however good they are at their own job. This 4-point road and track belt is for use without a head and neck device; if you run or plan a HANS, look at the 6-point FIA HANS-pattern belts in the range and we will spec the right one.
What does it mount to?
A harness needs proper anchor points: a harness bar, cage, or the car’s designed mounting points, plus a seat with the right slots, and as a 4-point it needs each point anchored correctly. Tell us the car and seat and we will confirm the mounting plan before you order.