Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

The Ultimate Guide To Fitting Seats With OMP Brackets And Side Mounts

Seat fitting guide

OMP make one of the widest ranges of car specific seat frames, and a set of side mounts to go with them. Between the two you can fit most base mounted reclining seats and most side mounted bucket seats to a long list of cars, without drilling the floor.

This guide explains how the OMP frames work, which seats they suit, where side mounts come in, and how the job goes together, with the checks we make before any order goes out.

  • OMP direct fit sub-frames are made for one car and bolt to the factory seat mounting points
  • They are steel, base mount, sold singly or in pairs, and handed
  • The frames are drilled for Sparco, OMP and Corbeau base mount seats on 345mm by 271mm
  • Recaro seats go straight on Planted brackets; an OMP base frame needs a little modification and drilling
  • Side mounted bucket seats need side mounts on top of the frame
  • OMP side mounts come in steel and 6mm alloy, in 400mm and 495mm lengths
Two black OMP Champ-R bucket seats with white piping fitted in a right hand drive Toyota Chaser, seen through the open passenger door
OMP Champ-R bucket seats in a customer's Toyota Chaser.

How OMP frames work

An OMP direct fit sub-frame is made for a specific car. It bolts to the mounting points already in the floor, in place of the factory runners, so nothing is drilled and the original seats can go back in later. On a car with any collector value, that matters.

The frames are steel and base mount. They are handed, so the driver and passenger sides are different parts. Some cars are listed as single frames and some as pairs, so check which listing you are ordering from. Each listing names the car it fits, and that is the part to match.

A black OMP steel seat sub-frame with slotted mounting holes, with two captive nut plates and a bolt beside it
An OMP direct fit sub-frame with its fixings.

Which seats suit an OMP frame

Base mounted seats. Reclining sport seats, and bucket seats with base mounts, bolt to the top of the frame, usually with a pair of sliding runners in between. The OMP frames are drilled for the 345mm by 271mm pattern shared by Sparco, OMP and Corbeau base mount seats and runners.

Recaro. OMP frames also carry a wider set of holes for Recaro seats. A Recaro goes straight on a Planted bracket, but an OMP base frame can take a Recaro too, with a little modification and drilling. If you have a Recaro, ask us which route suits your car.

Corbeau. Corbeau use more than one runner width across their range, so match the runner width on your Corbeau seat to the frame’s pattern before ordering. Corbeau and Recaro parts are not compatible with each other.

Garreth’s advice is simple: tell us the exact seat and the car, and we confirm the pairing before anything is sent.

Side mounts for bucket seats

Most fixed back competition bucket seats, including most FIA seats, are side mount only: they have threaded inserts in the sides of the shell and no fixings underneath. To fit one to an OMP frame you add a pair of side mounts. They bolt through the sides of the seat and down to the top of the frame, with runners in between if you want the seat to slide.

OMP’s side mounts come in several forms. The multi hole alloy mounts are 6mm aluminium, in a 400mm version with four floor holes and seat holes from 85mm to 166mm above the base, or a 495mm version with six floor holes and seat holes from 75.5mm to 175.5mm, on OMP’s 2026 catalogue figures. The longer bracket gives you more fore and aft and more height range. There are steel equivalents that are heavier and cost less, and OMP make damped alloy mounts with a damper at each mounting point, which are meant for rough off road competition and are more than a circuit car needs.

The OMP mounts use the common 290mm lateral spacing used across OMP, Sparco and Cobra competition seats. Side mounts only suit seats with side fixings; a base mount recliner will not take them. Our guide to alloy side mounts covers alloy against steel in more detail.

How the job goes together

1. Check the frame matches the car. Compare the listing with your car’s model and years, and check you have the right side.

2. Remove the factory seat. Disconnect the battery before unplugging any seat wiring, such as belt sensors or side airbags, and keep the factory bolts.

3. Build the stack on the bench. For a recliner: runners to the seat base, then seat to frame. For a bucket: side mounts to the seat, runners if used, then on to the frame. Choose the side mount holes that give the height and angle you want.

4. Fit and torque. Bolt the frame to the factory mounting points and tighten every bolt to the correct torque.

5. Sit in it and check. Check the reach to the wheel and pedals, the head room, and that the belt buckle or harness works with the new position. Set the seat position before you fit a harness, because moving the seat later moves the shoulder line.

You can browse every car we list on our OMP car specific fitting frames page, and the side mounts on our OMP side mounts page.

No. They are made for a specific car and bolt to its factory seat mounting points.

Base mount seats on the 345mm by 271mm pattern, such as Sparco, OMP and Corbeau, and side mount buckets with side mounts added.

Yes, with a little modification and drilling. A Recaro goes straight on a Planted bracket, so ask us which route suits your car.

Only for a side mounted bucket seat. A base mount recliner bolts to the frame, usually with runners.

Yes. Driver and passenger sides are different parts.

💬
Our rule of thumbCar first, then seat

Match the frame to the car, then the seat's pattern to the frame, and add side mounts only for a bucket.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text