Weetabix Truck With Cobra Seats And TRS Harnesses
From the archive, September 2024
Of all the vehicles we have supplied seats for, the Weetabix promotional truck is one of the most unusual. Built by Weetabix with the Daily Star and first reported in 2014, it is a V8 milk float in yellow and blue Weetabix livery, and we supplied the Cobra Monaco Pro bucket seats and blue TRS 4-point harnesses that went inside it.
It is a good example of proper motorsport seats going into something that is not a race car at all. A vehicle built to go much faster than any milk float should still needs to hold its driver in place, and a steel FIA seat with a full harness does exactly that.
- A V8 Weetabix milk float built with the Daily Star, first reported in 2014
- We supplied Cobra Monaco Pro FIA bucket seats
- Paired with blue TRS 4-point FIA harnesses
- The Monaco Pro is a steel seat, homologated to FIA 8855-1999
- It can be base mounted or side mounted

What is on this page
The Weetabix truck
The truck was built for Weetabix and the Daily Star as a promotional vehicle: a milk float with a V8, bright yellow and blue Weetabix branding and flames down the sides. It was always going to be an eye-catching project.
What surprises most people is the inside. Behind the wheel sit Cobra Monaco Pro FIA bucket seats with blue TRS 4-point FIA harnesses, the same kit you would find in a club race car. For a vehicle built to go far faster than a milk float normally would, it made sense to hold the driver in properly.
The Cobra Monaco Pro seats we supplied
The Monaco Pro is a fixed-back seat for competition and fast road use, homologated to FIA 8855-1999. Most FIA seats at this level are composite; the Monaco is fully steel plated, with a solid back and base for intrusion protection. It has deep side support, an integral head pad and shoulder supports, and slots for a 4 or 6 point harness.
It can be base mounted or side mounted, which is unusual on an approved seat and useful on a build like this, where the floor is not a normal car floor.

Our listing sizes the Monaco Pro for drivers under 6ft with a 32 to 36 inch waist, and it weighs 11.4kg, the honest cost of the steel plating. Cobra offers it in spacer fabric or soft grain vinyl, in one or two colours, with a wide choice of stitching and logo colours, so it can be matched to almost any livery.
We list a range of Monaco seats in different trims, approvals and widths, including versions for small cockpits, so there is one to suit most drivers and cars.
The TRS Magnum 4-point harnesses
The harnesses were TRS Magnum 4-point belts in blue. The Magnum uses 75mm (3 inch) webbing on the shoulder and lap straps, with a 140 gram composite aircraft rotary buckle on the right-hand lap strap. It is homologated to FIA 8854-1998 for saloon car use and comes with eyebolts and 7/16 inch UNF set-screws.

TRS introduced three small details that make a real difference in use: an intercom cable tab on the shoulder strap, thumb loops on the lower shoulder straps for easy adjustment, and Velcro patches on the outer lap straps so they stay on the seat when you climb in. The Magnum comes in a wide choice of webbing colours, which is how the truck got belts to match its blue livery.
Garreth’s advice when pairing a seat and harness is to check the seat’s slots suit the harness you want, which is why we sell the Monaco Pro with a matching TRS harness as a bundle. Our guide to fitting a motorsport harness covers the mounting.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £419.40 Incl. VATFrom £349.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £246.00 Incl. VATFrom £205.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
£1,149.60Original price was: £1,149.60.£1,080.00Current price is: £1,080.00. Incl. VAT£958.00Original price was: £958.00.£900.00Current price is: £900.00. Excl. VATPayPal CreditKlarna ReadySpeed+ ServiceGet notified
Which seats are in the Weetabix truck?
Cobra Monaco Pro FIA bucket seats, which we supplied.
Which harnesses are in the Weetabix truck?
Blue TRS Magnum 4-point FIA harnesses, which we supplied.
Is the Cobra Monaco Pro FIA approved?
Yes. It is homologated to FIA 8855-1999.
Can the Cobra Monaco Pro be base mounted?
Yes. It can be base mounted or side mounted.
💬
The pairingMonaco Pro and TRS Magnum
A steel FIA seat and a 3 inch FIA harness that suit each other.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.



