Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Choosing Aftermarket Sport Seats For Your BMW E87

Seat fitting guide

A customer asked us which seats to put in a BMW 1 Series E87, and the answer is longer than most, so we have written it up. The E87 is the 2004 to 2011 five door 1 Series, rear wheel drive, and it gets used on track far more than a hatchback of its size usually would. The standard seats are comfortable, but they let you move about once the car is loaded up in a corner.

This guide covers the seats we are asked about most for the E87, the frames that put them in the car, and what to check before you order. The first job is always the same: pick the seat, then match the frame to it.

  • The E87 is the 2004 to 2011 five door BMW 1 Series
  • Side mounted buckets go in on the PCI Racing E87 sliding sub frame
  • Base mounted recliners go in on the OMP E87 direct fit subframe
  • Corbeau side mounted seats need the PCI Racing frame holes drilled out slightly for M10
  • Recaro seats need their frame and mounts matched to the seat, so ask us first
  • The factory seats carry side airbags, so tell us the car's specification
A blue BMW 1 Series E87 five door hatchback cornering on a race circuit with red and white kerbing, driver in a white helmet
A BMW 1 Series E87 hatchback on track.

The seats we are asked about most

Between the frames below, a very wide range of seats will go into an E87. These are the ones E87 owners ask us about most often, from road seats that recline to fixed competition shells.

Recaro Sportster CS

The Sportster CS is Recaro’s most aggressive road seat. It reclines on both sides, has an integrated headrest and firm, well defined side bolsters, and takes both three point and four point belts. Recaro fitted it as original equipment to the Ford Focus RS, which gives a good idea of the intended use: a car driven fast on the road, sometimes on track and every day in between. It weighs about 14.7kg and base mounts on a 405mm pattern.

Recaro Pole Position

The Pole Position ABE is Recaro’s road approved racing shell, in glass fibre reinforced plastic at around 7kg, with a paddable lumbar support for everyday comfort. It is not FIA approved, so it is not a seat for timed competition. If you need a seat that passes scrutineering, the Pole Position FIA is the version to look at. The ABE suits a 32 to 36 inch waist and drivers under 6ft, and both versions side mount on Recaro’s own mounts.

Cobra Nogaro Circuit and Club Sport

The Nogaro is a one piece fibreglass shell, 7.9kg, side mounted, built for road and track. The Circuit is trimmed in leather and suede. The Club Sport is the identical shell in cloth or velour for less money, and it keeps the harness slots, so a four or six point belt still goes through it.

Sparco Evo QRT

The Evo QRT is a fibreglass bucket approved to FIA 8855-1999 and side mount only. It comes in three sizes, and our rule of thumb is: the Evo QRT for a 32 to 34 inch waist, the Evo L QRT for 34 to 38 inches, and the Evo XL QRT for 36 to 40 inches. Tell us your height and waist if you are between sizes.

OMP ARS-R and WRC-R

Both are gel coated fibreglass shells trimmed in OMP’s breathable Airtex fabric, approved to FIA 8855-1999, side mounted and HANS compatible, with five harness slots. The WRC-R has higher side bolsters, a removable split leg cushion and adjustable lumbar, and suits a 32 to 36 inch waist and drivers under 6ft. The ARS-R has mid height bolsters and removable lumbar and leg support, and suits a 36 to 38 inch waist at any height.

The frames that fit the E87

The right frame sets how low the seat sits, how secure it is and which seats you can run. Each of these bolts to the E87’s factory seat mounting points, so nothing is drilled and the original seats come out whole and can go back in later.

PCI Racing sliding sub frame

For a side mounted competition bucket, this is the frame we recommend for nearly every seat on the market, including the Cobra Nogaro, Sparco Evo QRT and OMP seats above. It is laser cut and CNC formed from a single piece of 1/8 inch carbon steel, powder coated gloss black, with grade 10.9 hardware and five and six point sub belt mounting points built in.

The seat slides fore and aft after fitting, which suits a car that still does road miles. The one exception is Corbeau: Corbeau side mounted seats now use M10 fixings, while PCI Racing side mounts are drilled for M8, so the holes need drilling out slightly for M10. It is a small modification rather than a straight bolt-on, so ask us if you are unsure. The frame is handed, so order one for each side.

OMP direct fit subframe

For a base mounted seat, such as a reclining sport seat or some steel framed buckets, the OMP E87 subframe is the route. It fixes to the chassis floor at the factory points, and side mounts or sliding runners can go on top of it for more adjustment.

OMP sell it singly as part HC848, or as a pair, which works out better if you are doing both sides. Tell us the seat so we can confirm the complete kit, as the mounting stack depends on the seat’s pattern.

A note on Recaro seats

Recaro seats use a wider base pattern than most brands, 405mm, and they are not interchangeable with Corbeau seats on the same frame. Garreth's rule is that a Recaro seat goes straight on a Planted Technology bracket, as in the photo, and an OMP base frame can take one with a little modification and drilling.

Planted's own 1 Series listing is written around the E82 coupe and E88 convertible, so for a Sportster CS or Pole Position in an E87, send us the car and the seat before ordering and we will confirm the frame and mounts that go with it.

A grey Recaro seat on black sliding runners bolted to a black Planted Technology bracket on the floor of a silver car, seen through the open door
A Recaro seat on runners and a Planted Technology bracket, in a different car.

Looking for carbon?

We are asked for carbon shells all the time. Carbon gives a stiffer shell that holds its shape under load, and it looks the part, but it costs a lot more than fibreglass, so it earns its place most in a car built to a weight limit. These are carbon versions of seats that go in on the same frames as their fibreglass equivalents.

What to check before you order

Fit. A 1 Series is not large inside and the transmission tunnel is substantial, so shell width matters as much as your own size. Try a seat if you can, or send us your height and waist.

Weight. A fibreglass bucket is roughly half the weight of a reclining sport seat, which is worth having in a track car and less important on the road.

Belts. If you plan to run a harness, check the seat has the slots for it. Some road buckets are made for a three point belt only.

Airbags. The E87’s factory seats carry side airbags and occupancy sensing. Tell us the specification before anything comes out and we will talk through what needs dealing with. For road recliners, our guide to reclining seats for the BMW 1 Series goes into more detail.

For most side mounted buckets we recommend the PCI Racing E87 sliding sub frame. Corbeau side mounted seats are the exception: they now use M10 fixings, so the M8 holes on the PCI side mounts need drilling out slightly first, a small modification.

The OMP E87 direct fit subframe takes base mounted seats, with room for side mounts or runners on top.

Yes, but Recaro seats need their frame and mounts matched to the seat, so send us the car and the seat before ordering.

No. The PCI Racing and OMP frames bolt to the factory seat mounting points.

As a rule of thumb, the Evo QRT for a 32 to 34 inch waist, the Evo L for 34 to 38 inches and the Evo XL for 36 to 40 inches.

💬
Our starting pointSeat first, then the frame

Pick the seat that fits you, and we will match the E87 frame and mounts to it.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text