Porsche JP Roll Cages Updated For 2024
Roll cage news, May 2024
Ready for the 2024 season, we have updated our JP Cages roll cages for Porsche. Each cage now has up to date information on its approval, its specification and the car it is built for, with more colour and configuration options.
The JP Porsche range takes in GT3 style cages for the 911 991 and 997, which fit using the car's existing mounting points, and a weld-in DIY kit for the 987.
- Our JP Cages Porsche roll cages updated ready for 2024
- Two GT3 style half cages for the 911 991 (2014 to 2018)
- A GT3 style Clubsport cage for the 997
- The 991 and 997 cages fit using existing mounting points, with no welding
- A weld-in DIY cage kit for the 987, in CDS or T45

What is on this page
What has changed on the Porsche cages
Each JP Cages Porsche listing has been checked and rewritten for the new season. The listings set out what each cage is approved for, the tube it is made from, the car it fits and how it goes in, with the fitting steps written out for the 991 and 997 cages. There are more colour options too.
GT3 style cages for the 911 991
There are two half cages for the 991 built between 2014 and 2018. The GT3 Replica half cage copies the styling of the factory GT3 cage in T45 tube, and the JP Style Clubsport half cage adapts it with curved gussets, an X centre with harness bars and an X rear, at around 17kg. Both fit cars with or without the panoramic roof, and both use the existing mounting points in the car.
The JP Style Clubsport cage lines up with the holes in the genuine GT3 seat delete kit, so a 991 Turbo S can take the GT3 rear trim and the cage together. The one extra job is a slot in the rear shelf carpet for the diagonal the factory GT3 cage does not have.
The 997 GT3 style Clubsport cage
For the 997, the GT3 style Clubsport cage follows the same idea: a lightweight cage that uses the existing mounting points, so there is nothing to weld. It has curved gussets and an X centre and X rear in T45, and it can be ordered with or without the harness bar, in a range of colours.
Fitting takes some care with the trims. A slot has to be cut in the rear trim, and the cage goes in through the passenger door before being tipped back into place.

-
From £1,479.30 Incl. VATFrom £1,232.75 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,126.50 Incl. VATFrom £938.75 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The 987 weld-in DIY kit
For a 987 track car, JP make a DIY weld-in cage kit for anyone with welding and fabrication skills. It includes the main hoop, back stays, X bracing, harness bars, front A bars, a roof bar and roof diagonal, double door bars and the mounting plates, all CNC notched, marked and labelled. It comes in CDS or T45 tube and weighs around 60kg.
Garreth’s advice is to check your championship’s rules before choosing a cage, as a half cage and a full cage do very different jobs. Our guide to roll cage rules explains the basics, and our JP roll cage range covers many other makes.
Do the JP 991 and 997 cages need welding?
No. They fit using the existing mounting points in the car.
Do the JP 991 half cages fit cars with a panoramic roof?
Yes. Both 991 half cages fit panoramic and non panoramic roof cars.
Does the JP Style Clubsport cage work with the GT3 seat delete kit?
Yes. It lines up with the holes in the genuine GT3 seat delete kit, with one extra slot needed in the rear shelf carpet.
Who is the JP 987 DIY kit for?
Builders with welding and fabrication skills who want a full weld-in cage for a 987.
💬
Ready for 2024JP cages for Porsche
GT3 style cages for the 991 and 997, and a 987 weld-in kit.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




