Auto Style Type RR Bucket Seat

From £305.52 Incl. VATFrom £254.60 Excl. VAT

Auto Style Type RR Bucket Seat by Safety Devices. Brackets included: Seat and sliders. Brand: Safety Devices. Construction: Fibreglass seats.

Product Colour

AutoStyle Trim Material

Clear

Perfect add-ons!

Choose any extras you would like added to this product.

TRS Clubman Clip In 4 Point Harness Belt

Choose an option

£100.00

Add to wishlist

Size/Fitting guide

Save to Pinterest

The Auto Style Type RR Bucket Seat is a seat from Safety Devices. Seat choice comes down to how the car is used. A fixed-back bucket holds you best and is what competition regulations expect, but it is harder to live with on the road. A reclining sports seat gives up some support for adjustment and everyday usability.

Auto Style Type RR Bucket Seat specification

Category	Bucket Seats
Brackets included	Seat and sliders
Brand	Safety Devices
Construction	Fibreglass seats
Driver Height	All heights suitable
Driver Waist Size	32″ – 36″ waist
Fixing Type	Side mount
Harness compatibility	4 point compatible
HANS Compatibility	Not HANS compatible
Mechanism Type	Fixed Back Seats
Product Colour	Black, Red
AutoStyle Trim Material	Velour, Vinyl
Part number	SS 80

Options available

Choose your options at the top of this page before adding to the basket.

Product Colour. Black, Red
AutoStyle Trim Material. Velour, Vinyl

If the combination you need is not listed, ask us. A lot of this kit can be ordered to spec even where it is not shown as an option.

Choosing the right seat

Seat choice comes down to how the car is used. A fixed-back bucket holds you best and is what competition regulations expect, but it is harder to live with on the road. A reclining sports seat gives up some support for adjustment and everyday usability.

A competition seat needs a vehicle-specific fitting frame, and usually side mounts as well. Check the seat width against your car’s tunnel and sill before ordering, because a wide shell in a narrow car is a common and expensive mistake.

We have been supplying motorsport kit since 2003, so if you are unsure between two options, ask.

What to check before you order

A handful of details decide whether this seat suits your car. These are the ones that matter.

Brackets included: Seat and sliders. Check this against what you already run before ordering.
Brand: Safety Devices. Check this against what you already run before ordering.
Construction: Fibreglass seats. Check this against what you already run before ordering.
Driver Height: All heights suitable. Check this against what you already run before ordering.
Driver Waist Size: 32″ – 36″ waist. Check this against what you already run before ordering.

If any of it does not match what you have, ask us before you buy.

Buying the Auto Style Type RR Bucket Seat from SportSeats4u

Stock is shown live on this page. If you need the Auto Style Type RR Bucket Seat for a specific event date, tell us when you order and we will confirm the lead time up front.

We have been in the motorsport trade since 2003, supplying club racers, race teams and workshops across the UK and exporting worldwide. That means the advice you get on fitment comes from people who use this kit, not from a spec sheet someone copied over.

If you are buying for yourself and you are torn between two options, call us. Five minutes on the phone usually settles it.

Auto Style Type RR Bucket Seat questions

Will the Auto Style Type RR Bucket Seat fit my car?

The seat needs a vehicle-specific fitting frame to mount to the floor. Tell us the car and we will confirm which frame you need alongside it.

Is it FIA approved?

Check the approval listed in the specification above. FIA-approved seats carry an expiry date, so check that too if the seat is for competition.

Can I use my standard seat belt?

With a reclining seat, usually yes. With a fixed-back bucket and harness slots, a harness is the safer answer, and some competition regulations require one.

How do I know what size I need?

Measure across your hips and compare against the seat width in the specification. If you are between sizes, go up, because a seat that is too narrow gets painful quickly.

Not sure the Auto Style Type RR Bucket Seat is the right choice? Send us your car details or what you compete in and we will confirm before you order.

Browse more bucket seats. Related: Safety Devices 4 Point Clubman, Safety Devices 3 Point Clubman, Safety Devices 4 Point Bolt In. Background reading: motorsport disciplines and what they require.

Additional information

Weight	25 kg
Dimensions	80 × 60 × 120 cm
Brackets included	Seat and sliders
Brand	Safety Devices
Construction	Fibreglass seats
Driver Height	All heights suitable
Driver Waist Size	32" – 36" waist
Fixing Type	Side mount
Harness compatibility	4 point compatible
HANS Compatibility	Not HANS compatible
Mechanism Type	Fixed Back Seats
Product Colour	Black, Red
AutoStyle Trim Material	Velour, Vinyl

Auto Style seat size guide

Auto Style make one size of every seat. The buckets suit a 32 to 36 inch waist, the two small ones go down to 28, and the recliners take most drivers.

How Auto Style size their seats

There are no Standard and XL versions. Each bucket is one shell and our product data bands it: nearly all of them at 32 to 36 inch, with the Type K5 and the Type K12 Small at 28 to 32 for slimmer and younger drivers. The Type BS7 is the tall bucket for drivers over 6 ft; the BS6, BS8, K5, K12 and Zandvoort suit drivers under 6 ft.

The reclining range is all one size and suits all heights. Three of them have published dimensions: the Eco Lux is 510 mm across the base, 540 mm across the shoulders, 550 mm deep and 910 mm tall; the RS6-II is 530 mm across the base and 560 mm across the shoulders; the Pro Luxury is 470 mm across the base and 600 mm across the shoulders.

Which Auto Style fits you

Model	Waist band	Driver height	Shell	Approval
Fixed bucket
Type BS1, BW, FS, JJ, LV, MO, RR, RT	32 to 36	All heights	Fibreglass	Road and track
Type BS6, BS8	32 to 36	Under 6 ft	Fibreglass	Road and track
Type BS7	32 to 36	Over 6 ft	Fibreglass	Road and track
Type BH	32 to 36	All heights	Steel frame	Road and track
Type K12, Zandvoort	32 to 36	Under 6 ft	Steel frame	Road and track
Type K5, Type K12 Small	28 to 32	Under 6 ft	Steel frame	Road and track
Reclining
Type GT, AK, BS2, C, DS, Eco, Eco Lux, GK, JW, LH	All sizes	All heights	Steel frame	Road and track
Type MR, MS, Pro, RK, RS6 II, T, T Eco, TN, VGR, Z	All sizes	All heights	Steel frame	Road and track
Type BS5	All sizes	Under 6 ft	Steel frame	Road and track
Classic
Type Classic, Headrest, II, RS, Retro, Retro II	All sizes	All heights	Steel frame	Road and track

Price pointAuto Style seats are the entry to the range and the bolsters are softer than a Cobra or Corbeau at the same waist. If you are at the top of a band and want to be held, look at the BS7 or step up a brand.

Measure yourself first

Four numbers decide whether a seat fits. Take them in the clothes you drive in, and write them down before you compare models.

AWaistAround your natural waist, not your trouser size. Trouser sizes usually run an inch or two under the real figure, and the waist bands on our product pages use the real one.

BSeated hip widthSit on a hard chair with your feet flat and measure straight across the widest point of your hips with a rule or a straight edge, not a tape that follows the curve. This is the number that decides whether a fixed shell is tight.

CShouldersStraight across the back at the widest point. Fixed back seats hold you here, so a shell that is narrow at the shoulders is uncomfortable long before it is unsafe.

DHeight and torsoYour height, and if you are over 6 ft whether that is mostly leg or mostly body. A long body needs a taller shell with the head support set higher.

Before you order

Check the car, not only the driver. Transmission tunnels, door cards and B pillars are what stop a wide shell going in. Our seat mounting and fixing points guide covers what to measure.
Side mount and base mount shells are not interchangeable. Which one you need depends on the car and the subframe, so pick the brackets at the same time as the seat.
If you run a HANS or plan to, filter on HANS friendly. The shoulder openings are cut to clear the collar.
FIA seats carry an expiry date on the homologation label. Check what your championship accepts and how long the seat has left, particularly on discounted older stock.

Send us your measurementsWaist, seated hip width, height and the car. We have fitted a lot of Auto Style seats and will tell you honestly if the one you have picked is going to be tight. Call 0115 989 3488 or email Sales@GSMPerformance.co.uk.

Waist bands and heights are our product data, checked 6 September 2026. The Eco Lux, RS6-II and Pro Luxury dimensions are Auto Style’s own listings.

Have you written anything about this exact product?
Yes, we have covered this exact product: Discover the Auto Style Type AK Reclining Sports Seat, and Auto Style Type Classic Bucket Seats Now Available to View In-Store. That is first-hand coverage from our own builds and showroom, not brochure copy.

Will I fit in this seat?
The maker sizes this seat for drivers with a 32in to 36in waist. Those are the paper numbers; how a seat actually feels to sit in and climb out of is a different question, and our showroom team sit in these seats every day, so call us with your height and waist and we will give you the honest answer.

What do I need to fit it to my car?
This is a side-mount seat: it hangs between side brackets, the motorsport-style stack with fine height and angle control. You will need the car-specific frame, and a sliding runner if you want fore-and-aft adjustment. Our guide on base mount versus side mount walks through the whole stack, and tell us your car and we will quote the full kit.

Does it work with harnesses and a HANS device?
The shell takes 4 point compatible. This shell is not shaped for HANS use, so if you run a head and neck device, look at the HANS-friendly seats in the range instead. If you are planning the full seat, harness, and HANS setup, tell us the car and we will spec it end to end.

How do I know it will feel right, not just fit on paper?
Fair question, because makers publish widths and weights, never feel, and two seats with identical numbers can feel nothing alike in the car. We keep the ranges on display in the Nottingham showroom, you are welcome to come and sit in them, and if you cannot get to us, call and describe your build, as the team sit in these seats every day. Our head support measurements guide shows the kind of real-world data we collect.

Production lead times

Safety Devices cages are custom made to order

Every cage is built for your car by Safety Devices in the UK, so nothing here comes off a shelf. Demand is consistently high, so plan ahead and order as early as you can.

Ring us for the current production time on your specific cage before you order.

Made to order, so check before you commit

A cage built to order cannot be cancelled once production has started, and our special order terms apply. Roll cages also carry their own cancellation charges once the manufacturer has accepted the order, set out in our terms.

Check the vehicle, the specification and your championship regulations before ordering. Send us your car details and what you compete in, and we will confirm the right cage first.

In-store displays:

We have a premium range of over 125 seats from brands including: Bimarco, Cobra, Corbeau, Sparco, OMP, Recaro, GP-Race, and Bride to name just a few brands we work with.

Alongside this, we also stock and display HANS devices, harnesses, race-wear, race-suits, FIA helmets and various other safety equipment. If you are looking to visit us to see and try any particular seat or product, please contact us in advance and we’ll be happy to help.

In-Store appointments:

Due to the specialist nature of our services, we do ask that you please contact us in advance to book an appointment. We have multiple slots available each day including selected availability at the weekend.

Working by appointment allows us to dedicate our time with you and provide a personal and professional service. We’ll always ensure you leave with the right equipment for your needs.

Spread the cost with Klarna

Choose Klarna at checkout and pick the plan that suits you. The options and amounts for this product are shown below, and they update when you choose an option above.

Use the purchase power check in the Klarna box for a quick, no-obligation look at what you could be approved for before you order.

How it works at GSM SportSeats4u

1Add the product to your basket and go to checkout as normal.
2Select Klarna as your payment method and choose your plan. Klarna gives you a decision in seconds.
3We dispatch straight away. You pay Klarna on the schedule you chose, and any refund goes back through Klarna.

Your questions, answered by Klarna

Klarna is available to UK residents aged 18 and over. Subject to status. Terms and conditions and late fees apply. Klarna Financial Services UK Limited is authorised and regulated by the Financial Conduct Authority. Full details at klarna.com/uk. Every way you can pay with us is on our payment and finance page, or call 0115 989 3488 and we will talk it through.

Fast delivery lead times:

If you require fast delivery, please contact us in advance of ordering and we’ll happily check stock allocation and availability for you. We carry a large amount of stock at our showroom and across multiple distribution hubs. This allows us to provide immediate dispatch across a huge number of brands from Corbeau and Cobra through to Sparco and OMP. (Does not apply to all items)

Due to the niche market we work in, some products are custom hand made to order, or special order from manufacturers like PCI Racing and Planted Technology. If you want to know how fast a product will be dispatched. Simply drop us a message through our Contact us form.

Addtional lead time notes:

Quick dispatch: Stocked products are dispatched within 24-48 hours with Parcel Force.
Sparco roll cages: We can only deliver these to a registered (LTD) company address.
In-store collection: Please contact us in advance to book an in-store collection appointment.

Talk to us

Useful Links

Quick Access

Want to chat?

Auto Style Type RR Bucket Seat