The Definitive Guide To The Sparco SPX Carbon Reclining Seat
Reclining seat guide, Sparco SPX
The Sparco SPX is the most exclusive reclining seat in the Sparco range, and it is not one we see often. A pair came through our showroom for a pre-delivery inspection on the way to a customer, who was fitting them to a Porsche. It was the first time we had the SPX in our hands, and Garreth and Cameron spent a while going over it before the pair went back in their boxes.
This guide covers what the SPX is, what the carbon shell and the trim are like up close, the measurements, how it mounts, and who it suits. It also covers what it is not, because a seat this expensive needs to be the right seat for the car before anyone orders it.
- Sparco part number SPA00974ZNR, sold as the seat only
- Gloss carbon fibre backrest with a composite lower section, around 12kg
- Italian leather trim with an Alcantara centre
- Road and track seat with no FIA homologation
- Base mount on Sparco's 345mm by 271mm pattern
- Handed: order RHD driver side and RHD passenger side separately

What the SPX is
The SPX is a reclining sport seat built around a carbon fibre shell. Sparco describe it as the first carbon fibre reclining seat sold to the public to the same specification they supply to car manufacturers, and it is made in Italy using the materials that go into OEM supercar seats.
It sits in an odd and useful place. It has the shape of a race seat, with tall shoulder support and firm side bolsters, but it reclines, takes the standard seatbelt and has the finish of a factory seat in an expensive car. It suits a premium road car or a trimmed track car where the owner wants the look and the support of a carbon seat and still wants to drive it every day.
If the rest of the cabin is leather, Alcantara and carbon, an entry-level bucket seat looks out of place. The SPX was designed to sit in that kind of interior.
The carbon shell and the weight
The shell is the reason the SPX costs what it does. The backrest is gloss carbon fibre and the lower section is composite, and the two together give a shell that is shaped, not padded into shape. Our listing puts the weight at around 12kg.
Reclining seats are usually heavy. The mechanism, the padding and the frame add up, and plenty of aftermarket recliners weigh as much as the factory seat they replace. The carbon back is how the SPX keeps the recline and keeps the weight down.
Up close, the finish is what you notice first. The carbon weave runs across the back and sides of the shell, and the Sparco badge on the back is a moulded piece set into the carbon. On a seat you see every time you open the door, that matters.
At the top of the backrest, the harness openings sit in a moulded surround bolted to the shell. The seat takes the car's standard seatbelt or a four point harness, according to our listing.
On the side of the backrest there is a leather pull strap that releases the back, which Sparco list as a feature, along with an adjustment knob for setting the driving position in small steps.

Inside the SPX: trim and support
The SPX is trimmed in Italian leather, perforated in the panels that need to breathe and smooth where it does not, with an Alcantara suede centre. The Alcantara is there for grip. On a smooth leather seat you slide about, and a reclining seat does not have bolsters deep enough to hold you on its own, so the suede centre does some of that work.
The shoulder support is tall and the side bolsters are firm, while the leg bolsters are slimmer. That makes the seat easier to get in and out of than a full race bucket, which matters on a car used on the road.
There are no head support wings. It is a road seat with race seat styling, not a competition shell.
The stitching is where a seat at this price shows itself, and the SPX is neat everywhere we looked: the double rows along the headrest, the seams between the leather and the Alcantara, and the embroidered Sparco logo at the top.
Garreth's advice with any seat at this level is to see it in person if you can, or ask us for photos of the details you care about, before you commit.

Measurements and who it fits
For a seat with this much shoulder support, the SPX is fairly compact. These are the measurements we took down for the pair we inspected:
| Measurement | SPX |
|---|---|
| Overall height | 940mm |
| Shoulder width | 542mm |
| Seat base width | 481mm |
| Depth | 615mm |
| Weight (our listing) | Around 12kg |
Our listing gives it as suiting a 32 to 38 inch waist, with all driver heights suitable. The tall back and big shoulder support mean drivers with broad shoulders may find the top of the seat snug, and the slimmer leg bolsters make it more forgiving at the base.
If you are near the edge of that range, send us your height, waist and shoulder measurements before you order. With a made-to-order seat, it is far better to talk it through first than to find out when it arrives.
Mounting: base mount on 345mm by 271mm
The SPX is a base mount seat. It bolts through the underside of the seat on Sparco’s 345mm by 271mm pattern, and it cannot be fitted with side brackets. It is supplied as the seat only, so each side needs a vehicle specific sub-frame, and runners if you want the seat to slide.
The straightforward pairing is a Sparco sub-frame for your car and a Sparco sliding runner kit, which our listing gives as the same 345mm by 271mm pattern. Not every car has a Sparco frame, and when that happens we check the frames that are available for your car and confirm the pattern before anything is ordered. Mixing brands of seat and frame is where fitting goes wrong, so tell us the car and we will match the frames to the seat.
The seat is handed. On our listing you choose RHD driver side or RHD passenger side, and order both if you want the pair.
-
From £2,815.79 Incl. VATFrom £2,346.49 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Made to order
The SPX is not a seat we keep on the shelf. Because of the materials, the way it is built and the price, it is made to order at Sparco in Italy for each customer, and the lead time depends on Sparco’s production schedule. That is why having a pair in the showroom, even for a short while, was worth writing about.
Being made to order has an upside. The SPX is rarely seen, even across the Sparco range, and the build quality on the pair we checked was what you would hope for at this level. It is worth planning around the wait.
What the SPX is not
The SPX is a road and track seat with no FIA homologation, so it is not a competition seat. If your championship or event needs an FIA approved seat, the SPX is the wrong choice, and our listing points to the Sparco Evo QRT family for that job. Your scrutineer has the final word on what is accepted.
It also reclines and has no head support wings, which is what you want in a road car and not what you want in a race car. If the car is going to see more track than road, we would talk you through fixed back options first.
For more on how recline mechanisms differ, our guide to hand wheel and quick tilt reclining mechanisms explains the options. If your car is a Porsche 996, our Porsche 996 reclining seat guide covers the fitting side.
Is the Sparco SPX FIA approved?
No. It is a road and track seat with no FIA homologation, so it is not suitable where an FIA approved seat is required.
What bolt pattern does the Sparco SPX use?
It is a base mount seat on Sparco’s 345mm by 271mm pattern, supplied as the seat only.
Can the Sparco SPX be side mounted?
No. It mounts through the base onto a vehicle specific sub-frame, with runners if you want it to slide.
What harness does the Sparco SPX take?
Our listing gives it as taking the standard seatbelt or a four point harness.
Is the Sparco SPX kept in stock?
No. It is made to order by Sparco in Italy, and the lead time depends on their production schedule.
💬
Our viewA carbon recliner for a premium road car
Tell us the car and your measurements, and we will check the frames and the fit before you order.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.

