Takata Drift III Snap-On Harness

From £324.00 Incl. VATFrom £270.00 Excl. VAT

Takata Drift III Snap-On Harness by Takata Racing. Application: Saloon. Approval: Road & Track. Brand: Takata Racing.

Webbing Colour

Clear

Package Bundle Recommendations

Choose any extras you would like added to this product.

Takata 3 Inch Comfort Pads

Choose an option

£150.00

Size/Fitting guide

SKU: 70002 Categories: Takata Drift Series Harnesses, Clip Buckle Road Harnesses

Save to Pinterest

Why buy from us

Free UK delivery over £100Calculated at checkout on smaller orders.
Tracking by email and textFrom the moment it leaves us.
Fitting advice since 2003Ask before you buy if you are unsure.
Showroom appointmentsSee the kit in person before you order.

Secure checkout

The Drift III Snap-On (part number 70002) is the most widely fitted Takata harness in UK modified cars. Snap-on installation uses the eye bolt anchors at the car’s lap belt mounting points: the brackets sewn into the lap belts loop over these bolts and tighten with pull-up adjusters. Most UK cars have these anchors accessible without modification, which makes the snap-on fit straightforward.

Where the Drift III differs from the Drift II (TAK74000) is the shoulder strap width: 3 inches against the Drift II’s 2. The wider strap spreads load more evenly across the top of the shoulder and makes a tangible difference on longer sessions even before adding comfort pads. Both carry ECE R16.04 approval for road use; neither is FIA approved.

The cam-lock buckle on the Race 4 (part number 71000) is a single-pull cam-lock. The Drift III uses a centre push-button clip release, which is the same mechanism as standard car seat belts. If you plan to run the harness at events where scrutineers check for a cam-lock, the Race series is the correct choice. For road use, track days without a harness regulation, and show use, the Drift III push-button release is simpler to operate.

Shoulder brackets are removable for wrap-around mounting on a harness bar. The ASM geometry in the lap belt prevents submarining by keeping the pelvis in position under forward load.

Choose the bolt-on version (TAK70003) if your car’s snap anchors are corroded, inaccessible, or if you want the harness to stay completely fixed when the seat is adjusted. Otherwise the snap-on fits the majority of UK right-hand-drive cars without modification.

Available in black or Takata racing green. The snap-on is the correct choice if you want to be able to remove the harness quickly when sharing the car with a driver who runs the standard belt.

Add 3-inch comfort pads: Takata 3 Inch Comfort Pads. Two-harness packs: 2 Takata Drift III Snap-On Green Harnesses.

Lead time is typically one to two working days. If you are unsure which mounting style or colour suits your setup, drop us an email or click to open a chat and we will help confirm the right choice.

Additional information

Application	Saloon
Approval	Road & Track
Brand	Takata Racing
Buckle Type	Clip Buckle
HANS Compatibility	Not HANS compatible
Harness Type	4-Point
Harness Strap Width	3" Shoulder to 2" Lap
Installation Type	Clip In
Webbing Colour	Black, Racing Green

Harness size and fitting guide

Harnesses are not sized to your body. They adjust to fit almost anyone. What you are actually choosing is the number of points, the approval, how it mounts in your car, and whether it works with a head restraint. Get those four right and the fit looks after itself.

How many points

Type	We stock	Typical approval	What it is for
3 point	23	Road and Track only	Inertia and static road belts. Not competition kit
4 point	99	Mostly Road and Track, 27 on FIA 8854-1998	Fast road and track days. Simple to fit
6 point	77	Almost all FIA 8853-2016	Competition. Two sub straps stop you submarining
8 point	1	FIA 8853-2016	Specialist. Two extra shoulder straps

If you need an FIA harness, you are looking at a six pointOf the 77 six point harnesses we stock, almost all carry FIA 8853-2016, the current standard. Four point harnesses are mostly Road and Track, with 27 on the older 8854-1998. Every three point we stock is Road and Track. So the point count and the approval are tied together far more tightly than people expect.

Approvals

Approval	We stock	What it means
FIA 8853-2016	69	The current competition standard. Carries an expiry date on the label
FIA 8854-1998	30	The older standard, mostly on 4 point harnesses
Road and Track	88	Not competition approved. Fast road and track day use

FIA harnesses carry an expiry date printed on the label, and a scrutineer will look at it. Check how long is left before you buy, especially on discounted older stock. Road and Track harnesses have no expiry but they are not accepted for competition.

Strap width

Wider straps spread the load over more of your shoulder. Narrower straps are easier to route and easier to live with over a head restraint.

Combination	We stock	Notes
2 inch shoulder, 2 inch lap	112	The most common combination here
3 inch shoulder, 2 inch lap	38	Wider shoulders, standard lap
3 inch shoulder, 3 inch lap	36	The widest, spreads the load furthest
2 inch shoulder, 3 inch lap	5	Uncommon

Strap width does not tell you whether it suits a HANSIt is a common rule of thumb that a head restraint needs two inch shoulder straps, and our own range does not bear it out. Most of our HANS Specific harnesses are two inch, but nine of them are three inch, and most of our Not HANS compatible harnesses are two inch as well because that group is largely road belts. Filter on the HANS label below, not on the width.

Head restraint compatibility

Label	We stock	What to do with it
HANS Specific	45	Designed to be used with a head restraint. Start here if you run one
HANS Friendly	38	Works with a head restraint
Not HANS compatible	97	Mostly road harnesses. Do not pair with a head restraint

If you run a HANS or any FHR device, or you plan to, filter on HANS Specific first. It is a smaller list but it is the one where the shoulder straps are cut and routed to sit over the device properly.

How it mounts, and this is the one to check first

The installation type has to match what is already in your car. It is the most common reason a harness arrives and will not go in.

Installation	We stock	What you need in the car
Clip in	101	Snap hooks onto eye bolts. The quickest to fit and remove
Bolt in	67	Bolts straight to a threaded mounting point or a bracket
Wrap around	49	The strap wraps a cage bar and buckles back on itself
Loop fixings	7	A loop over a bar or bracket

Clip in is the most popular because it is quick and because eye bolts are cheap to add. Bolt in is the tidiest where you have threaded points. Wrap around is what you use on a cage where there is a bar in the right place and nothing to bolt to. If you are unsure what you have, take a photo of the mounting area and send it over.

Buckles

Two types across the range: 94 clip buckle and 83 aircraft buckle. A clip buckle is the lever type, quick to release with one hand and the usual choice on a road or track day car. An aircraft buckle is the rotary cam lock, which is what most competition harnesses use because it releases every strap at once with a quarter turn. Both are easy to use once you know them. The cam lock is faster in a hurry.

Getting the fit right once it is in

Shoulder straps want to come from behind you at or slightly below shoulder height, never from above. If they angle down onto your shoulders from a high mounting point they load your spine rather than your chest. On a saloon that usually means a harness bar or a cage, not the rear parcel shelf.

Lap straps go across your hips, low, not across your stomach. Pull the lap belt tight first, then the shoulders, then the sub straps. If you can get a flat hand between you and the shoulder strap it is not tight enough.

Send us a photo of the mounting pointsThe car, whether you have a cage or a harness bar, and whether you run a head restraint. Those three decide the harness far more than anything about your own measurements. Call 0115 989 3488 or email Sales@GSMPerformance.co.uk.

All counts read from our own product data across the harness categories, checked 2 August 2026. Counts change as stock moves, so treat them as a guide to where the range is deep.

Is this harness legal for competition?
This one carries Road and Track rather than current FIA homologation, so check your championship regulations before buying it for competition. For road and track day use, that is not a problem. Ask us if you are unsure which your events require.

What does the strap width mean for me?
This is a 3 inch shoulder to 2 inch lap harness. The shoulder width choice interacts with whether you run a HANS device, and our guide on 3 inch versus 2 inch harnesses explains which to pick and why.

Do I need a HANS-specific harness?
No. Only 6-point FIA harnesses work with a HANS device: not 4-point belts, and not road harnesses, however good they are at their own job. This 4-point road and track belt is for use without a head and neck device; if you run or plan a HANS, look at the 6-point FIA HANS-pattern belts in the range and we will spec the right one.

What does it mount to?
A harness needs proper anchor points: a harness bar, cage, or the car’s designed mounting points, plus a seat with the right slots, and as a 4-point it needs each point anchored correctly. Tell us the car and seat and we will confirm the mounting plan before you order.

Availability

The harnesses are stocked, the seats are not

Takata harnesses are produced in batches and we take deliveries weekly, so belts like the Drift III are generally kept in stock for fast dispatch.

Takata seats are a different matter. Each one is handmade to order to Takata specification and takes 4 to 8 weeks. They are not stocked items.

Before you order a seat

A seat built for your order falls under our special order terms. Tell us your date when you enquire and we will confirm the current production time.

In-store displays:

We have a premium range of over 125 seats from brands including: Bimarco, Cobra, Corbeau, Sparco, OMP, Recaro, GP-Race, and Bride to name just a few brands we work with.

Alongside this, we also stock and display HANS devices, harnesses, race-wear, race-suits, FIA helmets and various other safety equipment. If you are looking to visit us to see and try any particular seat or product, please contact us in advance and we’ll be happy to help.

In-Store appointments:

Due to the specialist nature of our services, we do ask that you please contact us in advance to book an appointment. We have multiple slots available each day including selected availability at the weekend.

Working by appointment allows us to dedicate our time with you and provide a personal and professional service. We’ll always ensure you leave with the right equipment for your needs.

Spread the cost with Klarna

Choose Klarna at checkout and pick the plan that suits you. The options and amounts for this product are shown below, and they update when you choose an option above.

Use the purchase power check in the Klarna box for a quick, no-obligation look at what you could be approved for before you order.

How it works at GSM SportSeats4U

1Add the product to your basket and go to checkout as normal.
2Select Klarna as your payment method and choose your plan. Klarna gives you a decision in seconds.
3We dispatch straight away. You pay Klarna on the schedule you chose, and any refund goes back through Klarna.

Your questions, answered by Klarna

Klarna is available to UK residents aged 18 and over. Subject to status. Terms and conditions and late fees apply. Klarna Financial Services UK Limited is authorised and regulated by the Financial Conduct Authority. Full details at klarna.com/uk. Every way you can pay with us is on our payment and finance page, or call 0115 647 8650 and we will talk it through.

Fast delivery lead times:

If you require fast delivery, please contact us in advance of ordering and we’ll happily check stock allocation and availability for you. We carry a large amount of stock at our showroom and across multiple distribution hubs. This allows us to provide immediate dispatch across a huge number of brands from Corbeau and Cobra through to Sparco and OMP. (Does not apply to all items)

Due to the niche market we work in, some products are custom hand made to order, or special order from manufacturers like PCI Racing and Planted Technology. If you want to know how fast a product will be dispatched. Simply drop us a message through our Contact us form.

Addtional lead time notes:

Quick dispatch: Stocked products are dispatched within 24-48 hours with Parcel Force.
Sparco roll cages: We can only deliver these to a registered (LTD) company address.
In-store collection: Please contact us in advance to book an in-store collection appointment.