BRIDE FG Super Seat Rail for Toyota MR-S/MR2 Spyder (ZZW30)

From £252.00 Incl. VATFrom £210.00 Excl. VAT

Bride Toyota Mr S Type Fg by Bride Seats. Brand: Bride Seats. Available now from stock.

Sport Seat Position

SKU: BRIDE-FG-5F54E33D Categories: BRIDE FG Super Seat Rails, Bride Car Fitting Frames Tags: BRIDE seat rail, FG, ZZW30 Brand: Bride

Save to Pinterest

Bride Toyota Mr S Type Fg by Bride Seats. Here is what it is and what to check before you order. A fitting frame is the vehicle-specific base that bolts to the floor mounting points in place of the standard seat runners. The seat then mounts to the frame, either directly or on side mounts. Getting the frame right is what decides your final seat height and how far back you can sit.

Bride Toyota Mr S Type Fg specification

Category	Bride FG-Type Seat Frame Kits
Brand	Bride Seats
Part number	BRIEAHZC587

Choosing the right seat fitting frame

A fitting frame is the vehicle-specific base that bolts to the floor mounting points in place of the standard seat runners. The seat then mounts to the frame, either directly or on side mounts. Getting the frame right is what decides your final seat height and how far back you can sit.

Frames bolt to the factory seat mounting points, so no drilling is needed on a standard floor. Torque the floor bolts properly and check seat belt buckle clearance before you drive it, because a bucket seat often sits the buckle somewhere new.

We have been supplying motorsport kit since 2003, so if you are unsure between two options, ask.

What to check before you order

A handful of details decide whether this seat fitting frame suits your car. These are the ones that matter.

Brand: Bride Seats. Check this against what you already run before ordering.

If any of it does not match what you have, ask us before you buy.

Buying the Bride Toyota Mr S Type Fg from SportSeats4u

Stock is shown live on this page. If you need the Bride Toyota Mr S Type Fg for a specific event date, tell us when you order and we will confirm the lead time up front.

We have been in the motorsport trade since 2003, supplying club racers, race teams and workshops across the UK and exporting worldwide. That means the advice you get on fitment comes from people who use this kit, not from a spec sheet someone copied over.

If you are buying for yourself and you are torn between two options, call us. Five minutes on the phone usually settles it.

Bride Toyota Mr S Type Fg questions

Will the Bride Toyota Mr S Type Fg fit my seat?

The frame mounts to the car. Whether your seat bolts straight to it depends on the seat’s mounting pattern, so check whether you need side mounts as well. Send us the seat make and model if you want it confirmed.

Does it lower the seating position?

Most fitting frames sit the seat lower than the standard seat and runners. Exactly how much depends on the seat and whether you run side mounts or bottom mounts.

Can I keep the standard seat belt?

Usually yes, though the buckle position often changes. Check the buckle sits where you can reach it and is not fouled by the seat before using the car.

Do I need runners as well?

Only if you want fore and aft adjustment. Many frames accept a slider between the frame and the seat. Ask us if you need the seat to move.

Not sure the Bride Toyota Mr S Type Fg is the right choice? Send us your car details or what you compete in and we will confirm before you order.

Browse more bride fg-type seat frame kits. Related: Bride HISTONI Classic Bucket Seat, Bride ZETA IV Reims Bucket Seat, Bride EUROSTER II Fujiwara Edition Reclining Sports Seat. Background reading: motorsport disciplines and what they require.

Additional information

Sport Seat Position	RHD Driver Side, RHD Passenger Side
Brand	Bride Seats
BRIDE Rail Type	BRIDE FG Super Seat Rail
Fixing Type	Side mount
Fixing Bolt Pattern	290mm x 395mm
Make & model	Toyota MR-S/MR2 Spyder
Chassis Code	ZZW30
Manufacturer part numbers	T051FG, T052FG

Seat subframe and fitting equipment guide

A subframe is the part that bolts to your car’s original seat mounting points and gives the seat something to fix to. It is car specific, so the first thing to get right is the make, model and year. The second is which side of the car it is for.

Most subframes are handedOf the fitting equipment we stock, the large majority are listed as either RHD driver side or RHD passenger side. They are mirror images and they will not swap over. Ordering a pair when you only need one, or the wrong side when you need one, is the most common mistake in this category.

Order in this sequence

1Confirm the seat fixing typeSide mount or base mount. It is on every seat product page and it decides everything after it.

2Find the subframe for your carMake, model and year. Our subframes are vehicle specific, not universal.

3Pick the right sideDriver or passenger. Most are handed and they are not interchangeable.

4Add brackets if neededA side mount seat needs side mounts as well as the subframe. A base mount seat may not.

Buying the subframe first is how people end up with parts that will not go together. The seat decides the fixing type, the fixing type decides the brackets, and the car decides the subframe. Work down that chain rather than up it.

Material

Material	What it means
Steel	The standard. Strong and well priced
Aluminium	Lighter, and usually the higher priced option
Titanium	Lightest of the three. Specialist, and priced accordingly

For almost every road and track day car, steel is the sensible answer. Aluminium and titanium are worth it where you are chasing weight in a competition car and the regulations allow, and the saving on a pair of subframes is smaller than people expect.

Sliding and fixed

Some subframes are sliding, with the runner mechanism built in, and some are fixed. A sliding subframe is one part rather than a subframe plus separate runners, which is tidier and usually lower. A fixed subframe puts the seat where you bolt it and nowhere else, which is lighter, stiffer and fine if only you drive the car.

If two people share the car, look for a sliding subframe before you look at adding runners on top of a fixed one, because stacking a runner on a subframe raises the seat twice.

Bolt pattern

Where a subframe lists a fixing bolt pattern it will be 291 mm or 345 mm wide. That is the span across the seat’s mounting rails, and it is the same measurement that decides which sliding runner handle you need. If you already know your runner width, you know your bolt pattern.

What the subframe does and does not include

A subframe gets you from the car’s floor to a mounting plane. It does not usually include the side mount brackets that connect a side mount seat to it, and it does not include the seat. Check the product for what is in the box, and read our seat mounting and fixing points guide if you are not sure what else you need.

Check the height before you commitEvery layer you add lifts you: subframe, then runners, then brackets. In a car with a cage and a helmet that is the constraint that bites. If you are tall, work out your total stack height before ordering, and favour a sliding subframe or a low profile bracket over stacking parts.

Cars we cover

The range runs to well over a thousand parts across PCI Racing, Planted Technology, SW Motorsports, M2 Motorsport, Sparco, OMP, Recaro, Corbeau, Cobra and Endurance, covering most common performance cars and a lot of uncommon ones. Search your car rather than browsing, and if you cannot find it, ring us, because we can often get a subframe made for something that is not listed.

Send us the car and the seatMake, model, year, which side, and the seat you have chosen. We will tell you exactly which subframe and brackets you need, and whether a sliding one would suit you better. Call 0115 989 3488 or email Sales@GSMPerformance.co.uk.

All specifications read from our own product data for the fitting equipment categories, checked 2 August 2026.

Will this fit my car?
This frame is made for the Toyota MR-S/MR2 Spyder (ZZW30). Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.

Which seats does it take?
This is a BRIDE rail, made for BRIDE seats. The rail type in the specification determines which BRIDE seat family fits, so tell us your seat model if you are unsure.

Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on Bride frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.

Base mount or side mount, and does it matter?
This is a side-mount frame: the seat hangs between side brackets bolted through its flanks, the motorsport-style stack that gives fine height and angle control. Our guide on base mount versus side mount explains the whole fitting stack.

Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.

In-store displays:

We have a premium range of over 125 seats from brands including: Bimarco, Cobra, Corbeau, Sparco, OMP, Recaro, GP-Race, and Bride to name just a few brands we work with.

Alongside this, we also stock and display HANS devices, harnesses, race-wear, race-suits, FIA helmets and various other safety equipment. If you are looking to visit us to see and try any particular seat or product, please contact us in advance and we’ll be happy to help.

In-Store appointments:

Due to the specialist nature of our services, we do ask that you please contact us in advance to book an appointment. We have multiple slots available each day including selected availability at the weekend.

Working by appointment allows us to dedicate our time with you and provide a personal and professional service. We’ll always ensure you leave with the right equipment for your needs.

3 interest-free instalments with Klarna

Klarna is available at checkout

Borrowing more than you can afford or paying late may negatively impact your financial status and ability to obtain credit. Subject to status. Ts&Cs and late fees apply.

Klarna

Klarna is available at checkout

Klarna is available at checkout.

Fast delivery lead times:

If you require fast delivery, please contact us in advance of ordering and we’ll happily check stock allocation and availability for you. We carry a large amount of stock at our showroom and across multiple distribution hubs. This allows us to provide immediate dispatch across a huge number of brands from Corbeau and Cobra through to Sparco and OMP. (Does not apply to all items)

Due to the niche market we work in, some products are custom hand made to order, or special order from manufacturers like PCI Racing and Planted Technology. If you want to know how fast a product will be dispatched. Simply drop us a message through our Contact us form.

Addtional lead time notes:

Quick dispatch: Stocked products are dispatched within 24-48 hours with Parcel Force.
Sparco roll cages: We can only deliver these to a registered (LTD) company address.
In-store collection: Please contact us in advance to book an in-store collection appointment.

Talk to us

Useful Links