Mirco RTS 3D And TRS Harness Package, Ready To Dispatch
Seat packages, September 2021
Our Mirco RTS 3D and TRS harness package is ready for dispatch. It puts a Mirco RTS bucket seat together with a TRS Magnum four-point FIA harness, a pairing that has proved very popular because of how much support it gives.
The photos show the same combination in one of our customers' cars, an orange Ford Focus ST with a roll cage, finished with orange stitching to match. Here is what makes the two work so well together.
- Seat: Mirco RTS in 3D fabric, an FIA fibreglass bucket seat
- Harness: TRS Magnum four-point FIA harness, 3 inch webbing
- TRS Magnum approved to FIA 8854-1998
- Removable lumbar and leg support in the RTS
- The RTS is a narrower, tighter version of the Mirco RS2
- Harness kits come with eye bolts or 7/16 set screws

What is on this page
Why the pairing works
A good seat and a good harness do the same job from two directions. The seat holds you from the sides and underneath, and the harness pulls you back into it. Get both right and you stop moving around in the car, which lets you concentrate on driving instead of holding yourself in place.
The Mirco RTS has high sides and deep bucketed support at the legs to cut down unwanted movement, with large shoulder supports that stop you shifting sideways. The 3D fabric is comfortable too, so it suits long stints as well as short sessions.
The Mirco RTS 3D
The RTS 3D is a fibreglass FIA bucket seat with a comfortable ergonomic design, including removable lumbar and leg support so it can be tailored to the driver. It is a narrower and tighter version of Mirco's popular RS2, with the same styling.
We have the full Mirco range in our showroom to try, and the RTS has been a real hit since it went on display. It suits a wide range of drivers, but Garreth's advice is still to sit in one first if you can, or tell us your height and waist.

-
From £409.20 Incl. VATFrom £341.00 Excl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £405.78 Incl. VATFrom £338.15 Excl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £400.80 Incl. VATFrom £334.00 Excl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
£462.00 Incl. VAT£385.00 Excl. VATPayPal CreditAmazing valueKlarna ReadySpeed+ ServiceAdd to basket
The TRS Magnum four-point harness
The TRS Magnum uses 3 inch (75mm) webbing and is approved to FIA 8854-1998 for saloon cars. It is also made in five and six-point versions to suit standard saloon cars, and comes in a choice of colours.
- Aircraft style quick release buckle
- Velcro on the outer lap strap, so the straps stay on the seat when you get in
- An intercom strap on the shoulder for an intercom lead or drinks tube
- Thumb loops on the lower shoulder straps for easy adjustment
- Complete kits supplied with eye bolts or 7/16 set screws
Getting the mounting angles right matters as much as the harness itself. Our guide to fitting a motorsport harness explains the anchor points and angles.
What is in the Mirco RTS 3D and TRS harness package?
A Mirco RTS 3D FIA bucket seat and a TRS Magnum four-point FIA harness.
What approval does the TRS Magnum four-point harness have?
It is approved to FIA 8854-1998.
How wide is the TRS Magnum webbing?
3 inches, or 75mm.
How does the Mirco RTS differ from the RS2?
The RTS is a narrower, tighter version of the RS2 with the same styling.
💬
Why it worksA seat and harness that work together
A supportive Mirco RTS with a TRS Magnum FIA harness, ready to go into the car.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




