Sparco Martini seats: Pro 2000, R100 and Legend
Want the Martini Racing stripes inside your car? Start by deciding whether you need a reclining seat for everyday use or a fixed shell for a competition installation. The Pro 2000 QRT, R100 and Legend share the colours, but their mounting arrangements and approvals need checking separately.
This guide compares the three seats in our range and the matching H-9 harness. The showroom Pro 2000 photograph and the customer’s Abarth installation are kept here to show the actual seats; neither photograph establishes how a different car should be fitted.

What is on this page
The Martini Racing livery
Sparco’s Martini Racing collection draws on the companies’ earlier rally and circuit-racing partnership. It carries the stripes onto seats, harnesses and other equipment. Choose the seating position and restraint arrangement first, then the trim that suits the build.
Pro 2000 QRT Martini: a fixed FIA shell
Sparco Pro 2000 QRT Martini Racing has a fixed QRT shell, separate leg cushions and lateral kidney supports. Sparco identifies the Martini versions as 008016RMRBM in Petrol blue and 008016RMRGR in Elephant grey. The manufacturer’s Martini catalogue identifies FIA 8855-1999 homologation CS.424.19.
Both mounting routes are documented for this model. The FIA List 12 entry for Pro 2000 QRT permits lateral or lower supports; Sparco’s main catalogue specifies M8 lateral fastenings at 290mm spacing and a 271 × 345mm lower pattern. It should not be treated as side-mount only because it uses QRT construction.
For a side installation, match the required brackets to the seat and vehicle frame. For lower mounting, check the specified lower fixings and compatible frame or runner assembly instead. A permitted seat attachment type does not establish the car’s floor fitment, final height or competition compliance.
Our listing describes four- and six-point harness compatibility and use with an FHR. The driver’s shoulder-belt route, crotch straps, anchorages and FHR still need assessing together. A fixed shell also changes access compared with a recliner, so try the driver’s fit and check the door, sill and tunnel clearances before ordering.
R100 Martini: a reclining sport seat
Sparco R100 Martini Racing 009014MRNR has a reclining backrest, integrated headrest and black trim with Martini embroidery. Sparco’s R100 family specification describes a tubular frame, double adjustment lever, rapid tilting and 271 × 345mm lower fastening. It uses a base-mount arrangement, rather than side brackets.
The Martini specification lists ECE homologation and compatibility with three- and four-point sports seatbelts. It does not give an FIA seat homologation or establish that every vehicle installation is road legal or accepted at every track event. Confirm the exact seat’s documentation, belt route and intended use when planning the fitting.

A recliner is worth considering when backrest adjustment or access behind the front seats matters. The R100’s shape still needs measuring against the actual cabin; “slim” does not guarantee that the bolsters, recline mechanism or belt buckle will clear it. Our shop’s 32–36in waist category is a starting point for a sit test, with shoulder position, leg length and available headroom checked as well.
Related customer installation: see the Abarth 595 fitted with R100 Martini seats shown in the photograph. It shows the finished appearance in that customer’s car; another model needs its own fitment check.
-
From £660.00 Incl. VATFrom £550.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.50 Incl. VATFrom £1,374.58 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £511.31 Incl. VATFrom £426.09 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Legend Martini: the carbon-kevlar option
Sparco Legend Martini Racing follows the shape of Sparco’s 1980s carbon-kevlar rally seats. The 2025 Martini catalogue shows Petrol blue 008021ZMRBM and Elephant grey 008021ZMRGR, with FIA 8855-1999 identification CS.459.20. Its drawing marks lower fixings at 345 × 317mm, so it should not be paired with an R100 runner merely because both seats base mount.
The FIA Legend entry specifies lower supports. Our listing describes four- and six-point harness compatibility and FHR use; check the driver’s fit and the actual belt installation rather than assuming the retro shape settles those questions. The full shell drawing matters when checking clearance around the car.
For a competition purchase, ask for the supplied seat’s label and manufacture date. The current FIA list records October 2025 as the Legend homologation’s final manufacturing date. The seat’s own label governs its validity, and the list’s latest possible validity year is not an expiry date that applies to every example.
Match the complete seat and restraint installation
Send the car’s model, year, physical side and intended use before choosing a frame. Check the seat-to-mount and mount-to-floor interfaces separately, including the effect of any runners on height and belt position. Our seat-height guide explains why a compatible bolt pattern alone cannot predict the finished driving position.
- Pro 2000 QRT: lateral or lower supports are listed; use the matching hardware and fastening arrangement for the selected route.
- R100: lower fastening is 271 × 345mm. Check the exact runner and vehicle frame, with the backrest and belt buckle in their working positions.
- Legend: lower mounting, with 345 × 317mm marked on Sparco’s drawing. Confirm the supplied seat, frame and permitted use before ordering.
The matching H-9 Martini six-point harness is a separate choice from the seat. Sparco’s 2022 Martini catalogue identifies H-9 Evo 04825HMR with 2in FHR-specific straps, aluminium buckle and adjusters, and FIA 8853-2016 homologation SH.071.19-T-6. Match the supplied code and labels, including validity, to the intended FHR and installation; the newer H-2 PD is a different harness.
Garreth’s advice is to bring the car details and existing-seat photographs into the discussion first. Cameron can help identify the seat drawing and mounting parts to compare, and which seats are available to try. Bring the helmet and FHR you intend to use so the seated position can be assessed.
For related reading, our Martini harness article introduces that part of the collection. Check the exact current product code and instructions when ordering. You can browse the seats and other matching equipment in the Sparco Martini Racing collection.
Is the Pro 2000 QRT Martini side-mount only?
No. FIA List 12 permits lateral or lower supports for Pro 2000 QRT CS.424.19. Sparco specifies M8 side fastenings at 290mm spacing and a 271 × 345mm lower pattern. Match the complete mounting arrangement to the supplied seat, car and intended use.
Is the R100 Martini FIA approved?
Sparco lists ECE homologation for R100 Martini, not an FIA seat homologation. Its specification describes three- and four-point sports-seatbelt compatibility. Confirm the exact documentation and installation requirements for the car and event; ECE wording alone does not approve every fitting.
Does the R100 Martini need side mounts?
It uses lower mounting. Sparco’s R100 family specification gives a 271 × 345mm lower fastening pattern. The exact runners, frame, seat position and vehicle application still need matching; a shared bolt pattern does not establish the complete installation.
Can I use the H-9 Martini harness with an R100?
The R100 Martini specification describes three- and four-point sports belts, while the H-9 is a six-point FHR-specific harness. Do not assume the two form a suitable combination because they share the livery. Have the seat, restraint, anchorages and intended use checked together.
Is the Legend a base-mount FIA seat in Martini colours?
Yes. Sparco identifies Legend Martini as FIA 8855-1999 CS.459.20, and the FIA entry specifies lower supports. Its drawing marks a 345 × 317mm lower pattern. Check the supplied label and manufacture date, current validity and the complete fitting before competition use.
Talk through the car and seat choice
Send the model year, intended use, driver measurements and existing-seat photographs. Include the proposed seat and harness codes if you have already made a shortlist.
Want to try the seating position?
Ask which seats are available to try and what to measure in your car.



