Fiat Scudo Combinato Bucket Seat Guide
Start with the Scudo Combinato’s exact seat arrangement
A seat enquiry for a Scudo starts with which Scudo you have. Our Recaro fitting listing carries reference 686119, and Recaro’s Modular document identifies Scudo Combinato types 220L, 220P and 220 under 68.61.19/-29. That gives us a specific application to check against your vehicle and its original front-seat equipment.
Garreth would try the Speed, Expert and Specialist reclining shapes for support and getting into the cab. Cameron would identify the seating side and the parts below the cushion before completing the order. If you want the fixed-back look shown in our illustration, send the exact shell reference for a separate assembly enquiry.

At a glance
- Vehicle scope: Scudo Combinato, manufacturer types 220L, 220P and 220.
- Listed fitting kit: Recaro 686119, corresponding to manufacturer family 68.61.19/-29.
- Speed, Expert and Specialist are the Modular reclining families compared here.
- Original-seat equipment and passenger occupancy conditions form part of the application check.
- Recaro lists optional 20mm or 40mm raising arrangements; confirm the actual parts and final position.
The Recaro 68.61.19 Combinato application
Our Scudo kit is listed as 686119. In Recaro’s Modular document, the Scudo Combinato row gives 68.61.19/-29 alongside types 220L, 220P and 220. Match that maker reference to the physical seating side and the actual supplied kit.
The row names Combinato. A panel van, a different Scudo generation or an existing passenger bench needs its own application check. Include the year, body and photographs of the current front-seat mounts so we can establish which arrangement you have.
Cameron would use the complete application notes with the current kit instructions. A shared platform with another badge does not establish the same seat assembly. Keep the vehicle identification and original equipment on the enquiry from the start.
Record the original front-seat equipment
The cited Recaro row excludes vehicles with a side airbag in the original seat. It also carries passenger occupancy conditions under notes D or D1. Those conditions need checking against the actual equipment; otherwise the source limits this route to driver-seat replacement.
Tell us whether the passenger position is an individual seat or part of a bench, and photograph the existing mounts and adjustment controls. Include any previous interior changes. The Combinato application alone does not establish a bench-to-single-seat conversion.
Cameron would establish the eligible seating position before choosing the lower fittings. The current supplied kit and its instructions then determine the parts list. Drop us an email or click to open a chat with the vehicle details and photographs.
Try Speed, Expert S and Specialist S
The Speed gives an integrated-headrest sporting shape to try. Expert S and Specialist S have adjustable headrests and different cushion and bolster forms. Recaro includes these names in its Modular family, with the exact seat version and Scudo assembly still to be confirmed.
Garreth would try the cushion support and normal entry into the cab before choosing trim. Include the journeys you make and how much backrest movement you want. A short sit tells you less than trying the driving posture and reaching for the controls.
Cameron would check the release controls and backrest clearance in the actual interior. Sportster CS uses a separate application document, so its availability under another vehicle listing does not add it to this Scudo shortlist. Send that exact seat reference if it is the shape you want assessed.
-
From £1,001.70 Incl. VATFrom £834.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,146.60 Incl. VATFrom £955.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the runner in the supplied assembly
The Endurance Motorsport Recaro-compatible runner shown here is a separate adjustment option to discuss with the confirmed assembly. First establish the contents of the current vehicle kit. A manufacturer fitting reference is not a packing list for our supplied package.
Cameron would identify the seat-to-runner and runner-to-vehicle connections, required fasteners and handle position together. Check any adaptors or spacers on that same list. Trial the assembled seat and operate the release and locking action through the travel the driver needs.
Choose the height arrangement after a trial fit
Recaro’s Scudo row cites note 60 for an optional 20mm raising arrangement and note 60b for an optional 40mm arrangement. Neither note makes that raising compulsory. Confirm the exact compatible parts if either arrangement is needed for your driving position.
The stated 20mm and 40mm describe the raising options in the document. They do not predict where a different cushion will finish relative to the original seat. Include the runner, lower fittings and driver when checking headroom, wheel reach and pedal reach.
Note 48 permits Recaro armrests on the tunnel and sill sides of the driver or passenger seat, subject to the full application. That is an available arrangement to assess, not a promise that armrests are supplied. Garreth would try the arm position and entry clearance before adding them to the order.
Check the Expert cushion dimensions in the cab
Recaro’s Expert S/M drawing gives a maximum cushion envelope of 520mm across by 545mm front to rear, with a maximum backrest height of 820mm. The rectangle below draws the cushion envelope at one scale. Compare it with the available cab space before checking the headrest, backrest and adjustment controls.
The drawing excludes mounting hardware. It gives a seat envelope rather than the Scudo floor-hole pattern. Trial the full assembly with the driver to judge the finished height and control reach.
Plan a fixed-back bucket with its matching supports
For a fixed-back bucket, send the exact shell name and version with your Scudo details. The Modular reclining-seat application used here does not establish a Pole Position, Profi or other competition shell on kit 686119. A lateral-fixing seat needs its matching supports and a checked connection to the lower assembly.
Garreth would try the shell’s cushion, shoulder support and normal entry into the cab. Cameron would then check the seat instructions and each connection beneath it. The modified minibus illustration shows the intended style without demonstrating a verified bucket-and-frame installation.
Choose the belt layout with the seat
The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.
Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the complete driving position in the Combinato
Record the body, year, vehicle type and physical seating side, including the original passenger arrangement. Use the current instructions for the exact seat and kit. Identify every retained and replacement part before fitting, with the specified fasteners for each connection.
With the driver seated, check the wheel, pedals, headroom and buckle access. Move the runner and backrest through the required range and check clearance with the door closed. Garreth would try normal entry and exit; Cameron would repeat movement and locking checks after tightening.
Common questions
Our listed Recaro kit is 686119. Recaro’s Modular document gives 68.61.19/-29 for Scudo Combinato types 220L, 220P and 220. Confirm the physical seating side, original equipment and current supplied assembly against the full conditions.
The cited manufacturer row names Scudo Combinato with types 220L, 220P and 220. A panel van, another generation or a passenger bench arrangement needs its own application check. Send the body and year with photographs of the existing mounts.
Passenger eligibility depends on the original arrangement and the occupancy conditions in the manufacturer notes. Otherwise the source limits this route to driver-seat replacement. A bench conversion is a separate enquiry.
The Scudo row permits optional 20mm or 40mm raising arrangements. It does not require either or establish that the parts are included. Confirm the actual assembly and trial the finished position before choosing.
Confirm the contents of the current supplied kit before adding another runner. Identify the rails, any adaptors and the required fasteners with the exact seat. The vehicle application document is not a package contents list.
Speed, Expert and Specialist are the Modular families discussed here. Try the intended version for cushion support, cab entry and adjustment access, then confirm the full fitting combination. Sportster CS needs its own application enquiry.
Send the exact shell and vehicle details for a complete fitting enquiry. The reclining-seat application does not establish the bucket combination. Check the shell’s matching supports, their connection to the lower fittings and the proposed belt arrangement.
The drawing shows the maximum 520mm by 545mm cushion envelope and excludes mounting hardware. The runner, vehicle fittings and any raising parts also affect the finished position. Trial the complete assembly with the driver.
Garreth’s top tip
Garreth would try the Speed and Expert S early in the decision, with getting into the Scudo given as much attention as cushion support. Keep the journeys and passenger use you need in that discussion. Choose the seat shape first, then settle the trim and any compatible armrests.
Cameron’s fitting view
Cameron would start with the Combinato type and original seating equipment. He would confirm the eligible position, 68.61.19/-29 assembly and actual runner contents, then trial the driving posture. Optional raising parts belong in that trial instead of being added from a number alone.
Plan your Fiat Scudo Combinato seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Recaro Modular document 91284 extension 04, Scudo Combinato row on PDF page 23 and notes on pages 60–63; Recaro Expert S/M dimensions; Fiat’s 2000 Scudo range information; current linked seat and fitting listings.







