Fiat Brava Bucket Seat Guide
Choose the Brava’s seat route before completing the fittings
The Brava is the five-door fastback from Fiat’s original Bravo and Brava project. Its extra passenger doors make a different starting point for rear access from the three-door Bravo. For a seat change, we list a Sparco fitting base and a separate Recaro route for this earlier type 182 car.
Garreth would choose the support shape around the journeys and passengers the Brava needs to carry. Cameron would match that seat to the appropriate base, runner and current supplied hardware. The references below establish different fitting enquiries, so keep the parts for each route together.

At a glance
- Vehicle scope: original Brava type 182, with the actual year, body and physical seating side checked.
- Sparco: shop 00499010-1661, manufacturer base 00499010, with catalogue dates August 1995 to August 2001.
- The Sparco row names runner 00493 and 345mm x 271mm seat-side mounting centres.
- Recaro: our Bravo/Brava kit 862116 corresponds to 86.21.16/-26 in the maker’s Brava application.
- Sportster CS and the identified Modular reclining families use their own Recaro application documents; confirm the exact supplied assembly.
Sparco 00499010 for the Brava
Our Brava base carries shop reference 00499010-1661. Sparco’s vehicle table names Brava type 182 under 00499010, with dates August 1995 to August 2001. It lists runner 00493 in that row.
The -1661 suffix identifies this shop record. Confirm the actual manufacturer reference and physical seating side with the supplied parts. A shared base code with another Fiat is useful to trace, but the Brava’s own application is the evidence used here.
Cameron would photograph the original mounts and any rails or adaptors already fitted. Include earlier changes to the interior with the enquiry. The new seat, runner and base should be selected as one complete assembly.
-
From £87.00 Incl. VATFrom £72.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Specify the 00493 runner named by Sparco
Sparco’s vehicle table names runner 00493 for this application. The current runner card shown here carries 0049306, listed separately as Slide Runners KR in the 2025 catalogue. Both catalogue entries give 271mm longitudinal spacing, but they remain separate references.
Cameron would confirm the required current runner and its connection to the vehicle base before completing the order. A shared measurement alone does not establish the full assembly or handle position. Keep the seat, base and runner references together on the enquiry.
Trial the release and locking action with the driver seated. Check that both rails operate together and move through the range you need. Include the runner and all lower fittings when judging the finished cushion position.
Compare Sprint, Sprint Sky and Sprint L
The Sprint is a tubular-frame fixed-back seat to try for its cushion and backrest support. Sprint Sky offers a different upholstery surface, while Sprint L is the larger version. Garreth would sit in the intended size before choosing the finish.
Sparco’s 2025 catalogue identifies lower mounting at 271mm x 345mm and 290mm lateral fixing spacing for the illustrated Sprint and Sprint Sky models. Confirm the exact supplied version and its instructions. Choose the base-mounted or side-mounted arrangement before ordering the parts beneath the cushion.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
R100, R100 vinyl and R333 reclining choices
The R100 fabric and vinyl versions give two finishes of the reclining seat to compare. The R333 has a different bolster and cushion shape to try. Garreth would judge support and getting over the side bolster before settling on upholstery.
Sparco’s catalogue gives the R100 family and R333 271mm x 345mm lower fixings. Match the exact supplied seat and its instructions to the complete lower assembly. Those centres establish one mounting connection without promising cabin clearance or an installed height.
Move the backrest through the range you need and check that its controls stay reachable. Trial the driver’s wheel and pedal reach with the seat in position. Keep any rear-seat access you want in the same check.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £449.47 Incl. VATFrom £374.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Plan the connection for a side-mounted shell
The Sparco steel side mounts shown here are an option to discuss for a seat using lateral fixings. They connect the shell to the lower assembly. Confirm the support reference, hole positions and connection beneath it against the exact seat instructions.
A seat using its lower fixing points does not automatically need side mounts as well. Cameron would identify each connection before completing the parts list. A different competition shell can require its own specific supports.
The 345mm x 271mm seat-side centres
Sparco’s application table gives 345mm x 271mm for the seat-side mounting reference. Its seat catalogue gives the same lower-fixing dimensions for the illustrated Sprint, R100 and R333 families. The diagram draws those centres at one scale.
The outer frame outline is schematic. It gives neither the Brava floor-hole pattern nor the outside width of a seat. Check the exact seat, controls and lower fittings separately when measuring cabin clearance and the finished driving position.
The Brava’s Recaro 86.21.16 application
The combined Bravo/Brava listing carries shop reference 862116. Recaro’s own documents separately identify Brava type 182 with 86.21.16/-26. That gives a manufacturer application to check against the car and exact seat, without assuming compatibility from the shared model project.
The cited Brava entry identifies vehicle details including G983 and e3*96/27*0019. Cameron would compare the actual vehicle and original equipment with the complete application conditions. The supplied physical side and all parts below the seat still need confirming.
The manufacturer also permits an optional 20mm seat-raising arrangement in this application. That is a configuration to confirm if needed. It is not a statement that a spacer is always required or included in our kit.
Sportster CS, Speed and Expert S on the Recaro route
Recaro’s Sportster document identifies the Brava under 86.21.16/-26. Its Modular document provides the Speed and Expert family application. Confirm the exact seat version and current supplied fitting assembly with the vehicle details.
Garreth would compare the Sportster’s more pronounced support with the different cushion and bolster shapes of Speed and Expert S. Try the seats before choosing trim. Cameron would check the backrest movement, adjustment controls and buckle clearance in the actual interior.
These reclining-seat applications do not establish a Pole Position or other fixed competition shell on this Recaro kit. A fixed-back Recaro enquiry needs its own verified supports and lower connection. The Sparco seat examples above belong to the separately planned Sparco route.
-
From £1,581.30 Incl. VATFrom £1,317.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,001.70 Incl. VATFrom £834.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the runner contents of the Recaro assembly
The Endurance Motorsport Recaro-compatible runner is shown as an adjustment option to discuss if the confirmed assembly needs it. First identify what comes with the actual 86.21.16 kit and exact seat. Another rail set is not automatically added to a complete supplied arrangement.
Cameron would check the seat-to-runner and runner-to-car connections, release handle and any required spacers or adaptors. The application table does not provide a packing list for our kit. Trial the complete assembly before judging cushion position and headroom.
Measure the Expert cushion envelope in the Brava
Recaro’s Expert S/M drawing gives a maximum cushion envelope of 520mm across by 545mm front to rear, with a maximum backrest height of 820mm. The rectangle below draws that cushion envelope at one scale. Compare it with the available space, then check the moving controls and backrest separately.
The drawing excludes all mounting hardware. It cannot establish the Brava’s floor pattern or an installed height. Include the runner, vehicle fittings and driver when trialling the finished position.
Choose the belt layout with the seat
The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.
Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the complete driving position in the Brava
Record the year, body, physical seat position and any previous changes to the mounts. Photograph the existing arrangement before selecting the parts. Use the current instructions supplied with the exact seat and vehicle kit, including the required fasteners at each connection.
With the driver in position, check the wheel, pedals, headroom and buckle access. Operate the adjustment through the range you need and check clearance with the door closed. Garreth would try normal entry and exit; Cameron would repeat the movement and locking checks after tightening.
Common questions
We list Sparco base 00499010-1661 and the combined Recaro Bravo/Brava kit 862116. The manufacturer references are Sparco 00499010 and Recaro 86.21.16/-26. Match the exact seat and vehicle details to one complete assembly.
The Brava application names 00493. Our current runner card carries 0049306, which Sparco lists separately as KR in its later catalogue. Confirm the required current reference and connection before ordering; shared spacing alone does not prove interchange.
The Sportster document and Modular document establish separate family applications under 86.21.16/-26. Sportster CS, Speed and Expert S are the shapes compared here. Check the exact version and current supplied assembly against the actual car and complete conditions.
The cited manufacturer note permits it as an option. Confirm whether that configuration is needed and what is supplied with the exact kit. It does not mean a spacer is always required or included.
Confirm the actual package contents and seat connection before adding separate rails. The manufacturer’s vehicle application is not a packing list. Identify the runner, adaptors and fasteners supplied with your exact assembly.
The 345mm x 271mm dimensions describe seat-side mounting centres. They do not give the shell’s outside width or the car’s floor-hole pattern. Measure the exact seat and trial the complete position with the driver.
The cushion, runner and every lower fitting affect the final height. Trial the whole assembly and check headroom and control reach. This guide does not promise a height reduction.
A seat using lateral fixings needs its matching supports and a checked connection to the lower assembly. A seat fitted through lower fixing points is a different arrangement. Confirm the exact seat version and all connections before choosing the extra fittings.
Garreth’s top tip
Garreth would sit in the Sprint and R100 before deciding between fixed-back and reclining seats, then compare the Recaro shapes if that route suits the brief. Keep normal entry and rear-passenger use in the trial. The covering is the later decision once you have found the support you want.
Cameron’s fitting view
Cameron would put the chosen seat and its fittings on one clear parts list. For Sparco he would check 00499010 and the required runner reference; for Recaro he would check the Brava’s 86.21.16 application and supplied contents. He would trial the complete driving position before the final assembly is tightened.
Plan your Fiat Brava seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Sparco’s vehicle application table; Sparco’s seat and runner catalogue; Recaro Modular applications and notes; Recaro Sportster applications; Expert S/M dimensions; Fiat’s Brava body description.













