Driftworks Seats And Harnesses: Our 2021 Range Update
Range update, October 2021
We have just been through our whole Driftworks range: the FIA bucket seats and the harnesses. Every listing now carries fuller information about the product, and we have added something that saves a step when you buy.
That something is optional bundled harnesses. On a Driftworks seat you can now add a harness at the same checkout, so the seat and belts arrive together and the car is ready for track sooner.
- Our Driftworks seat and harness listings have been updated
- New and fuller information on every Driftworks product
- Optional harness bundles can be added at checkout with a seat
- Driftworks seats are designed and produced with Cobra
- Three FIA seats: the Imola, Suzuka and Evo
- The harnesses are made for Driftworks by TRS

What is on this page
What we have changed
The update covers both halves of the Driftworks range. Each seat and harness listing now has more detail about what the product is, what it is approved to and how it fits, so it is easier to compare them side by side before you choose.
The bigger change is at the checkout. We have added optional bundle items, so when you pick a Driftworks seat you can add a harness to go with it in the same order. Most people buying a fixed back seat for track need belts as well, and this puts the two together in one place.
The seats, built with Cobra
Driftworks seats are designed and produced in association with Cobra Seats, one of the long standing UK seat makers. Each one is a composite, fixed back, side mount seat, trimmed in black with orange stitching and the Driftworks logo embroidered on the headrest.
There are three shells to choose from. The Imola has the shallowest sides of the three, which makes it the easiest to get in and out of. The Suzuka has deeper sides and shoulders and more cushioning, for a tighter hold. The Evo is the top of the range, with high sides and head protection, and it is sized for a larger build than the other two.
The harnesses
The Driftworks harness belts are made for them by TRS. The range runs from belts for road use through to FIA approved harnesses for motorsport, so there is an option whether the car is a fast road build or a competition car.
If you are adding a harness to a new seat, the angles matter as much as the belt. Our guide to fitting a motorsport harness goes through the shoulder strap angle, the lap strap position and the anchor points.
Our pick of the range: the Evo
If we had to point at one seat, it would be the Driftworks Evo. It is a fully FIA approved, composite side mount seat with high sides and head protection, and it takes 3, 4, 5 or 6 point harnesses. For a competition car that also needs to be comfortable over a long session, it covers a lot of ground.
Fit is still the thing to get right first. Garreth’s advice is to tell us your height and waist size before you order, because the Evo and the two smaller shells suit different builds. Our guide to side mounts and base mounts explains what else you need to fit a seat like this.
What changed in the Driftworks range update?
Every Driftworks seat and harness listing got fuller information, and we added optional harness bundles at checkout.
Who makes Driftworks bucket seats?
Driftworks seats are designed and produced in association with Cobra Seats.
Which Driftworks seats are in the range?
Three FIA approved fixed back seats: the Imola, the Suzuka and the Evo.
Who makes the Driftworks harnesses?
They are made for Driftworks by TRS.
How are Driftworks seats fitted?
They are side mount seats, so they need side mounts and a suitable frame or runners for the car.
💬
Our pickThe Driftworks Evo
A Cobra-built FIA seat with head protection, now with a harness you can add at checkout.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.



