Do Recaro double locking runners fit the Recaro LX-B?
Will the Recaro double locking runners fit my Recaro LX-B seats? A customer asked us that this month, with a pair of LX-B seats ready to go in. Yes, they fit. Garreth checked the underside of the LX-B: the holes are 405mm apart centre to centre, with two front holes on each side, and that is the pattern the Recaro 364954 runners bolt to.
- Fit confirmed by Garreth against the LX-B base pattern on 16 November 2026
- Prices checked against our live Recaro runner listings on 16 November 2026, inc VAT
- Cameron checks the frame for your car before anything is ordered

Recaro Seats Double Locking Sliding Runners
£166.94inc VAT, one seat
Yes, they fit the LX-B. This listing is the runner set for one seat, so order two for a driver and passenger pair, or take the two-seat listing.
- Bolts to the LX-B's 405mm base pattern
- 220mm of fore and aft travel
- Locks on both rails from one lever
- Recaro part 364954
The LX-B base pattern, measured
Garreth took the measurements from the underside of an LX-B. The width is the number that decides the runner, and at 405mm centre to centre it matches the Recaro double locking runner, the same width most base mount recliners use.
At the front the LX-B has two holes on each side, at 235mm and 262mm from the rear hole. That double front hole is the detail that makes owners wonder whether a modern runner will line up, and it does: the 364954 runner bolts on with no adapter plate.
| Measurement | Recaro LX-B |
|---|---|
| Width between the holes, centre to centre | 405mm |
| First front hole, from the rear hole | 235mm |
| Second front hole, from the rear hole | 262mm |
| How the seat fixes | Through its base, to the runner |
Measured by Garreth on 16 November 2026. Our seat bolt patterns guide covers the other Recaro patterns.
The runners: one seat or two
The Recaro double locking runner is the most popular fitting part in the Recaro range we carry. One lever releases the lock on both rails together, so the seat slides as one piece and locks square on both sides, with 220mm of travel for different drivers.
We list it two ways: the runner set for one seat, and a listing with enough for two seats, which suits a driver and passenger pair of LX-B seats.
The two-seat listing is the same Recaro 364954 runner, two sets in one order, so both LX-B seats move and lock the same way.
Garreth’s advice for a pair of seats is simple: put the same runner under both, so the seats sit at the same height and the passenger side feels like the driver’s.
What goes under the runners
The runner joins the seat to a frame or bracket made for your car, which bolts to the floor. The order runs floor, frame, runner, seat. Runners add a little height under the seat, which matters in a low car or with a helmet on, so tell Cameron your height if headroom is tight.
Drop us an email or click to open a chat with your car and registration, and Cameron will list the frame that goes under the runners.
Frame for your car
Bolts to the floor mounting points and gives the runner a flat, strong base.
Double locking runner
Recaro 364954, bolted to the frame, with 220mm of fore and aft travel.
Recaro LX-B seat
Bolts through its base to the runner on the 405mm pattern.
Our guide to sliding runners covers runner widths across the brands, and seat bolt patterns explained sets out how each maker drills its seats.
Questions we get about the LX-B and these runners
Do Recaro double locking runners fit the Recaro LX-B?
How many runners do I need for two LX-B seats?
Do I need an adapter plate between the LX-B and the runner?
Will the runners raise the seat?
Which frame do I need for my car?
What we tell LX-B owners
Garreth
Garreth's top tip
The LX-B measures 405mm across, and that is the Recaro double locking runner's width, so it is the runner I would put under it.
For a pair of seats, order the runners together so both sides lock and slide the same.
Cameron
Cameron's fitting view
Before anything ships I check the frame for your car, because that is the part that changes from car to car. The runner and the LX-B bolt together the same way every time.
Send me the registration and how tall the driver is, and I will check the headroom with the runner in the stack.
Fitting runners to your Recaro LX-B?
Ring us with your car and your seats. Cally, our digital receptionist, takes your details and Cameron comes back to you with the frame and runners for your car. If you already have the frame, tell us which one and we will check it takes the runner.

