Discover Our OMP Classic Bucket Seat Line-Up
Classic seats, December 2025
If you are restoring a classic or building something with a retro interior, the seats make or break the look. OMP's classic range puts period styling on a modern tubular steel frame, and all three models are now side by side in our showroom: the Classic 1970s Revival, the Brands Hatch and the Silverstone.
Seeing them together makes the differences obvious, in height, in trim and in how much of a period feel each one gives. This post covers what sets each seat apart, who it suits, and how they mount on the standard 345mm base mount pattern.
- Three OMP classic seats: Classic 1970s Revival, Brands Hatch and Silverstone
- All three are on display together in the showroom
- Tubular steel frames, around 7 to 7.5kg each
- Base mount on the 345mm by 271mm pattern, not side mount
- 4 point harness compatible
- Road and Track seats, not FIA approved

Why a classic style seat
A modern fibreglass race shell can look out of place in a car from the 1960s, 70s or 80s. A classic style seat keeps the character of the interior, with period materials, stitching and shapes, while giving far more support than a tired original seat.
The OMP classic seats are built on tubular steel frames, which gives them a more period feel than a fibreglass shell, and they are light for steel framed seats at around 7kg. They suit fast road classics, retro hot hatches, restomods and show cars where the look matters as much as the hold.
OMP Classic 1970s Revival
The Revival takes its style from 1970s competition car interiors. It is the tallest of the three, a high back seat with a matching headrest included, and deep bolsters.
The trim is split, with velour down the centre and smooth vinyl on the bolsters and outer shell. That two tone look is very period, and the velour gives some grip through the middle.
- High back with headrest included
- Velour centre, vinyl sides
- Tubular steel frame, 7kg
- Base mount on 345mm by 271mm

OMP Brands Hatch
The Brands Hatch sits between the other two and is the most finished looking of the three. The seat and backrest are in a corduroy effect velour, and the outer bolsters and back are in synthetic leather with a quilted, diamond stitched pattern. An adjustable headrest is included.
- Corduroy effect velour centre, quilted vinyl sides
- Adjustable headrest included
- Around 540mm wide, 760mm tall including the headrest, 550mm deep at the base
- Tubular steel frame, 7.5kg
- Base mount on 345mm by 271mm
It is a good all rounder for most retro builds, with a little more comfort and detail than the Revival.
OMP Silverstone
The Silverstone is the simplest and lowest of the three, and the only one with no headrest. It is fully trimmed in vinyl, smooth on the sides with a ribbed, horizontally pleated centre, and it has tall side bolsters running up the backrest. It looks like an early circuit car seat.
- Low back, no headrest
- All vinyl, ribbed centre
- Tubular steel frame, 7kg
- Base mount on 345mm by 271mm
It is the practical choice for an open car, or a car where the roof is low or a headrest would foul a roll hoop.
Size and fit
All three are compact by modern standards and feel similar at the hips, because they share the same kind of frame and foam. Where they differ is height and outside width:
- Silverstone: the lowest and narrowest, for tight cockpits.
- Brands Hatch: in the middle for height and width.
- Classic 1970s Revival: the tallest, for cars with a bit more room.
Having all three on the floor means you can sit in each one in a few minutes. Garreth’s advice is to do exactly that if you can get to us, and if you cannot, send your height and waist and we will tell you how they compare.
Mounting
All three OMP classic seats base mount on the 345mm by 271mm pattern, the same spacing used by OMP, Sparco and Corbeau base mount seats, so they bolt straight to a frame or runner made for that pattern. For a fixed seat, bolt it to a base frame for your car. For adjustment, add a sliding runner kit on the same pattern.
They are base mount only, so side mounts do not apply. Cobra frames and runners use a 291mm pattern and will not line up without adaption bars. Recaro frames are a different, wider pattern again, so do not plan around them either.
These are Road and Track seats, for road use and track days. They are not FIA approved, so they are not the answer for a scrutineered competition car that needs an FIA seat. Remember a base frame adds height, which matters under a low classic roofline, so tell us the car and we will check clearances.
The rest of our classic range
Alongside the OMP seats we have classic buckets and reclining classic sport seats from other brands, in finishes from plain vinyl to tartan and houndstooth. You can see the whole selection in our historic and retro classic seats category.
What OMP classic bucket seats are there?
Three: the Classic 1970s Revival, the Brands Hatch and the Silverstone.
Which OMP classic seat has no headrest?
The Silverstone. It is a low back, all vinyl seat.
How do the OMP classic seats mount?
All three base mount on the 345mm by 271mm pattern. They are not side mount seats.
Will they fit a Cobra frame?
Not directly. Cobra frames use a 291mm pattern, so they need adaption bars.
Are the OMP classic seats FIA approved?
No. They are Road and Track seats for road use and track days.
💬
On display togetherRevival, Brands Hatch or Silverstone
Three period looks on one mounting pattern, side by side in the showroom.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




