Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

You've unlocked three free gifts All three are in your basket at no charge.
  • Gift box
  • GSM Performance Customer Car Colouring Book Edition 1
  • 4WD Mini RC Drift Car - BMW

Customer Car With OMP Seats & Racing Wheel

Customer cars, April 2021

We supplied one of our customers with an OMP First R fibreglass bucket seat for their track car, along with an OMP Targa 330 steering wheel. The car has been stripped back to the painted shell and has a roll cage, so the seat and wheel were the last big pieces of the cabin.

The seat went in on Endurance Motorsport side mounts, which line up with the First R's fixing points, and a red TRS harness holds the driver in. Here is what went into the car and why it works.

  • Seat: an OMP First R fibreglass bucket seat
  • Wheel: an OMP Targa 330 suede steering wheel
  • Seat fitted on Endurance Motorsport side mounts
  • Red TRS harness, routed through the seat's harness slots
  • The car is stripped to the shell and has a roll cage
An OMP First R bucket seat beside a suede OMP steering wheel in a stripped red car with a roll cage
Our customer's OMP First R and OMP wheel, seen through the driver's door of the stripped and caged car.

The car

This is a proper track build. The interior has been stripped out, the shell painted, and a roll cage runs through the cabin. The dash has been kept, the door cards replaced with flat panels, and the side windows swapped for polycarbonate, still wearing their protective film in the photos.

In a car like this the seat has a clear job: hold the driver still. A shell that fits, bolted in solidly, means the driver is not bracing against the car through every corner, which makes a long session far less tiring and lets them concentrate on the driving.

The OMP First R seat

The First R is the starting point of OMP's competition seat range: a fibreglass shell with FIA 8855-1999 approval and a velour cover. It has five harness slots, so it takes 4, 5 and 6 point harnesses, and a removable base cushion.

OMP rates it for drivers up to 6ft. It is a side mounted seat with the standard 290mm fixing spacing, and it comes without brackets, so it needs side mounts and a way of fixing them to the car.

A black OMP First R bucket seat with a red TRS harness through its shoulder slots, inside a red car with a black roll cage
The First R with the red TRS harness in place, seen through the open door.

For this car we used Endurance Motorsport side mounts, which line up with the OMP’s fixing points. Fitting parts designed for the job are the safest way to hold the seat solidly at the right height. Our guide to seat bolt patterns explains how the side mount spacing works across the brands.

The OMP Targa 330 wheel

The customer also took an OMP Targa 330 steering wheel. It has a suede grip and aluminium spokes, and the yellow marker at the top of the rim makes it easy to see where straight ahead is when the wheel is turning quickly.

A smaller, flatter wheel than the standard one frees up room for the driver's knees and gives a more direct feel. You can see the OMP Targa 330 on our GSM Performance store.

A black suede three spoke OMP steering wheel with a yellow centre marker, seen from the passenger side of a stripped red car
The OMP Targa 330 wheel on its boss, with the stripped floor below.

Harness and fitting

A red TRS harness completes the seat. The shoulder straps run through the First R’s upper slots and the lap and crotch straps through the lower ones, which is exactly what the extra slots are there for.

Garreth’s advice for anyone doing the same is simple: pick the seat for the driver first, then the side mounts and frame for the car. Tell us the car, the driver’s height and waist, and what it will be used for, and we will put the seat, mounts and harness together. Our harness fitting guide covers the mounting points once the seat is in.

An OMP First R fibreglass bucket seat, approved to FIA 8855-1999.

Endurance Motorsport side mounts, which line up with the First R’s fixing points.

No. It needs side mounts and a frame or floor fixing suited to the car.

An OMP Targa 330 with a suede grip and aluminium spokes.

💬
Why it worksAn approved seat that fits the driver

An FIA fibreglass First R on proper side mounts, with a TRS harness and an OMP wheel to match.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text