Customer Car: Audi TT Fitted With Mirco RTX-7 Bespoke Trimmed Bucket Seats
Customer car, August 2025
One of our recent customers came to us with a blue Audi TT and a clear idea: a more track focused interior that still looked the part. The answer was a pair of bespoke Mirco RTX-7 fibreglass fixed back bucket seats, trimmed in breathable 3D spacer fabric, with the back shells painted yellow and blue stitching and embroidery to pick up the Audi's paintwork.
To finish the look, the customer fitted yellow TRS 4 point road harnesses to match the shells. Open the door and the yellow against the blue bodywork is the first thing you see, and the seats give the support you want for hard cornering.
- Car: Audi TT Mk2, the customer's own
- Seats: a pair of Mirco RTX-7 fibreglass fixed back buckets in 3D spacer fabric
- Finish: yellow painted back shells with blue stitching and embroidery
- Harnesses: yellow TRS 4 point road belts
- Fitting: SW Motorsport sub frame and side mounts

What is on this page
The build
The customer wanted two things from the seats: proper support on track, and an interior that matched the outside of the car. Mirco’s options made both possible in one order. The RTX-7 shell was painted yellow, the 3D spacer fabric trim was stitched in blue, and the embroidery was done in the same blue, so the seats tie straight back to the TT’s paint.
The yellow TRS harnesses complete it. With the belts, the shells and the stitching all working together, the cabin looks like it was planned as one piece, and it gives the driver the hold a fixed back bucket is there for.
From the hatch you can see how the harnesses are routed. The shoulder straps come through the RTX-7's harness slots and wrap around a harness bar across the rear of the cabin.
The yellow backs are the painted shells, which is one of the options Mirco offers on this seat. Standard black shells are the other route if you want a quieter look.

Seat spotlight: the Mirco RTX-7
The RTX-7 is a fibreglass, fixed back, side mount seat homologated to FIA 8855-1999, so it suits track days and competition. It has strong shoulder supports, deep side bolsters and high thigh supports, which keep you in place through quick direction changes on track or on a good road.
Mirco lists more than 250 variations of it. You choose the shell colour, the stitching colour and the trim material, and you can add embroidery, which is exactly how this customer’s blue and yellow pair came about.
- FIA 8855-1999 fibreglass shell for track and competition
- 3D spacer fabric trim, which breathes well
- Strong shoulder and thigh bolsters
- Works with 4 point and 6 point harnesses
- Custom shell, stitching, trim and embroidery options
-
From £418.80 Incl. VATFrom £349.00 Excl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
£1,345.20Original price was: £1,345.20.£1,272.24Current price is: £1,272.24. Incl. VAT£1,121.00Original price was: £1,121.00.£1,060.20Current price is: £1,060.20. Excl. VATPayPal CreditKlarna ReadySpeed+ ServiceAdd to basket
Dimensions and fit in the Audi TT
The TT does not have a big cabin, but the RTX-7 went in without any door card modifications and without touching the centre console. It also left room to set the seat for a taller driver while keeping it well placed in the car.
Mirco lists the RTX-7 for a 32 to 36 inch waist. If you are near the top of that range the seat will feel snug, which is how a motorsport seat is meant to feel. Ask us if you are unsure and we will talk it through with your measurements.
| Measurement | RTX-7 |
|---|---|
| Shoulder width | 600mm |
| Width at the hips | 385mm |
| Front base width | 420mm |
| Width at the thighs | 490mm |
| Seat length | 615mm |
| Seat height | 920mm |
| Height to the harness slots | 645mm |
| Height to the shoulders | 620mm |
Why choose a Mirco bucket seat?
Mirco’s big draw is the choice. Across the range there are more than 250 variations, so the shell colour, stitching, trim material and embroidery can be set to match a car’s interior, its paint, or a team’s colours. The results run from bold two tone pairs like this one to quiet black seats that look like they came with the car.
The seats are made for real use too. Deep bolsters and shaped shoulder supports hold you under cornering loads, the trims are chosen to wear well, and the FIA homologated models can be used in competition. The range comes in several sizes, so there is usually one that suits the driver’s build. You can see the whole line up in our Mirco FIA seat range.
How the seats were fitted
The customer used SW Motorsport fitting parts for the TT Mk2: a model specific sub frame with SW Motorsport side mounts on top, giving a solid fixed installation. The sub frame is made to suit the TT Mk2 floor, and it lets the seats sit low for more headroom, which helps taller drivers and anyone wearing a helmet on track.
Another route is a Planted Technology bracket. Planted makes vehicle specific seat brackets that bolt to the factory holes in the floor, and with side mounts on top they give a flexible base for a fixed seat, or for an adjustable one with sliding runners. In a cabin as tight as the TT’s we would not suggest an XL sized shell, because of clearance at the doors and the centre console. Tell us the seat you want and we will check which frame and mounts go with it. See our Planted Technology frames.
Other bucket seats we suggest for the TT Mk2
From the TTs we have helped with, there are a few seats we know go in without clearance problems or changes to the interior. Alongside the RTX-7, we suggest the Sparco Evo, the Cobra Nogaro and the OMP TRS-E for anyone after a different style. All of them give good side support and suit the space in the TT’s cabin.
Garreth’s advice is to send us your height and waist size along with the car, and we will tell you which of these suits you best.
-
£1,586.40Original price was: £1,586.40.£1,507.08Current price is: £1,507.08. Incl. VAT£1,322.00Original price was: £1,322.00.£1,255.90Current price is: £1,255.90. Excl. VATPayPal CreditKlarna ReadySpeed+ ServiceAdd to basket
Does the Mirco RTX-7 fit an Audi TT Mk2?
Yes. This customer’s pair went in without door card modifications and without touching the centre console.
Is the Mirco RTX-7 FIA approved?
Yes. It is homologated to FIA 8855-1999, with the expiry on the label.
Can I choose the colours on a Mirco seat?
Yes. You can choose the shell colour, stitching and trim, and add embroidery, with more than 250 variations listed.
What was used to fit the seats in this TT?
An SW Motorsport sub frame for the TT Mk2 with SW Motorsport side mounts.
Which other bucket seats suit the TT Mk2?
We also suggest the Sparco Evo, Cobra Nogaro and OMP TRS-E.
💬
Want a pair like this?Tell us your colours
Send us the car, your size and the colours you have in mind, and we will spec the seats with you.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




