Citroen Xantia Bucket Seat Guide
Choose the Xantia fitting route by type and seat family
Citroën introduced the Xantia in 1993, with a Break estate following and a facelift later in the model’s life. A front-seat change needs the actual vehicle type and original adjustment recorded alongside the year. Our Recaro listing gives one shop reference, while the maker’s documents distinguish seat families and vehicle applications.
Garreth would try the Sportster CS if you want a more pronounced support shape, then compare a Speed or Expert for the appropriate application. Cameron would check whether the car matches the X1 or X2 entry and which seat document applies. Keep those details with the parts list as the seat choice develops.

At a glance
- Listed kit: Recaro 686619, corresponding to the maker’s 68.66.19 family.
- The Sportster document identifies Xantia X1 and Xantia/Xantia estate X2 applications.
- The Modular document used here identifies Xantia/Xantia estate X2; its row does not establish the same seat families for X1.
- The X2 row excludes original electric fore-and-aft seat adjustment.
- Match the exact seat version, physical side and supplied lower fittings before completing the order.
Recaro 68.66.19 for the identified Xantia application
Our Xantia fitting kit is listed as 686619. Recaro writes the family as 68.66.19/-29 in its vehicle documents. The maker’s application details provide the useful distinction here: identify the vehicle type and the intended seat family together.
The Sportster document names Xantia X1 and Xantia/Xantia estate X2 entries. The Modular document used for the Speed and Expert comparison names X2. Cameron would match the actual vehicle details and exact seat to the appropriate entry before confirming the kit.
The X2 application carries a restriction on original electric seat-length adjustment. Include photographs of the original controls and mounts with the enquiry. A car whose seats have already been changed needs those earlier alterations recorded as well.
Keep X1, X2 and estate details with the enquiry
Check the vehicle-type details against the maker’s application instead of choosing from registration year alone. For an estate, include the Break body description and photographs of the front-seat mounts. The documents group that body with the stated X2 application.
An X1 Sportster entry does not automatically establish an X1 Speed or Expert assembly. Those seat families use their own application document. Cameron would check that route separately if you want one of them for an earlier car.
Sportster CS, Speed and Expert S to try
The Sportster CS gives a more pronounced bucket-like shape with a reclining backrest. Speed has a different cushion and integrated-headrest form, while Expert S has an adjustable headrest and a different bolster arrangement. Try the shapes before choosing a finish.
The Sportster shortlist is tied to the X1/X2 entries described above. Speed and Expert are compared for the X2 application established in the Modular document. Confirm the exact version and its complete lower assembly with the vehicle details.
Garreth would compare support with the ease of getting into a car that still does everyday journeys. Cameron would check the recline controls, buckle and space behind the backrest. Keep the rear-seat use you need in that trial.
-
From £1,581.30 Incl. VATFrom £1,317.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,001.70 Incl. VATFrom £834.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the supplied runner and lower fittings
The Endurance Motorsport Recaro-compatible runner is shown as a separate adjustment option to discuss with the confirmed assembly. Establish what comes with the actual vehicle kit before ordering another runner set. The maker’s vehicle application document identifies a fitting reference, without listing every part in our supplied package.
Cameron would check the seat-to-runner and runner-to-car connections, release handle and required fasteners. Any spacers or adaptors belong on that same parts list. Trial the assembled position and move the seat through the travel needed by each driver.
Measure the Expert cushion envelope in the Xantia
Recaro’s Expert S/M drawing gives a maximum cushion envelope of 520mm across by 545mm front to rear, with a maximum backrest height of 820mm. The rectangle below draws the cushion envelope at one scale. Compare it with the actual space available before checking the backrest, headrest and controls.
The fitting hardware sits beneath the cushion and changes the final driving position. This is a seat envelope, not a vehicle floor-hole pattern. Measure the complete assembly with the driver when judging headroom and reach.
Plan a fixed-back bucket as a complete fitting enquiry
The reclining-seat documents used here do not establish a Pole Position, Profi or other competition shell on this kit. A side-mounted seat needs its own matching supports and a verified connection to the vehicle fittings. The Recaro name on both products is insufficient to specify that assembly.
Garreth would try the shell for support and normal entry before choosing it for the car. Cameron would check the exact seat instructions and all parts below it. Send the intended shell reference with photographs of the current mounts so the alternative arrangement can be assessed.
Match the belt arrangement to the chosen seat
The four-point examples and six-point competition option shown here have different strap and attachment layouts. Begin with the intended use, then check the seat’s belt openings and the belt manufacturer’s routing instructions. A comfort recliner and a competition bucket can require quite different arrangements.
Cameron would check the available attachment positions, buckle access and any rear-seat use that needs to remain. The vehicle seat kit does not establish harness attachment points. Keep the belt enquiry with the seat choice so the proposed interior can be considered together.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the driving position with all mounting parts
Send the year, body, vehicle-type details and physical seating side with photographs of the present mounts. Include the original adjustment features and any previous seat changes. Match the seat and current supplied kit to the manufacturer’s application and fitting instructions.
With the driver in position, check the wheel, pedals, headroom and buckle access. Operate the runner and backrest through the range you need, then check clearance with the door closed. Garreth would finish by trying normal entry and exit; Cameron would repeat the movement and locking checks after tightening.
Common questions
The shop reference is 686619, corresponding to Recaro’s 68.66.19 family. Identify the vehicle type, original adjustment and chosen seat so the correct manufacturer application and supplied assembly can be checked.
The Sportster document identifies X1 and X2 entries. The Modular document used here identifies X2 for the Speed and Expert families. Do not transfer that latter application to X1 without a separate check.
The quoted X2 row excludes original electric seat-length adjustment. Send photographs of the original controls and mounts so the actual arrangement can be identified before selecting the kit.
Recaro names Xantia and estate together in its X2 application. Include the Break body, vehicle-type details, original adjustment and physical seating side with the chosen seat enquiry.
Confirm the contents of the actual supplied kit before ordering extra rails. The application reference is not a packing list. Identify the runner, adaptors, spacers and fasteners needed by the exact seat.
The reclining-seat applications do not establish a fixed-shell combination. Give us the exact bucket-seat and vehicle details for a complete fitting enquiry, including the seat’s matching supports and its connection to the lower assembly.
The cushion, runner and vehicle fittings all affect the finished height. Trial the whole assembly with the driver and check the controls and headroom. The Expert cushion drawing cannot predict a height reduction.
Garreth’s top tip
Garreth would compare the Sportster CS with the other reclining shapes once the vehicle application is settled. Try entry and exit as well as the support when seated. For an everyday Xantia, the ease of using the car remains part of choosing the seat.
Cameron’s fitting view
Cameron would keep the X1 or X2 details beside the exact seat reference. He would check the applicable manufacturer row, original adjustment and current kit contents before trialling the complete position. An X1 Sportster entry is not used to promise a different seat-family installation.
Plan your Citroen Xantia seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Recaro Sportster vehicle application document; Recaro Modular vehicle application document; Expert S/M dimensions; Citroën’s Xantia model history.







