BMW 6 Series Coupé F13 Bucket Seat Guide
Plan the seat and rear access in the F13 Coupé
The F13 is the fixed-roof, two-door 6 Series Coupé. Its long doors and rear seating make the seat’s controls and backrest movement part of the fitting decision. This guide follows Planted’s explicit F13 Coupé application.
Garreth would begin with the recliners for a car that still does longer journeys. Cameron would check the complete mounting height and the room needed to move the backrest before choosing the seat. Include how you use the rear seats when you send the fitting enquiry.

At a glance
- Vehicle bracket: Planted SB390 for BMW 6 Series Coupé F13, listed by the maker for 2011 to 2018.
- Order by physical left or right and steering side, checking driver/passenger labels.
- A sliding Planted installation uses a separate matched runner.
- A side-mounted shell needs compatible side mounts as part of the assembly.
- Check the full installed height, shoulder clearance and adjustment in the car.
The F13-specific Planted bracket
Planted lists the SB390 for BMW 6 Series Coupé F13 from 2011 to 2018. It is the vehicle-specific connection between the car’s mounting area and the seat fittings above it. Choose the runner and seat together so every connection through that assembly is checked.
Include F13, year, body details and the physical seat position with the order. Photograph the existing mounts if a previous owner has changed the interior. Similar model names do not establish the same floor application.
-
From £224.95 Incl. VATFrom £187.46 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Left and right matter when ordering
Planted’s product pages call the left-hand bracket driver/left and the right-hand bracket passenger/right. That is its left-hand-drive naming, so a UK right-hand-drive driver sits on the opposite physical side.
Cameron would keep both the physical side and steering side on the enquiry. Include photographs if the current fittings have been adapted so the seat and bracket can be checked against the car as it stands.
Choose the Planted pattern with the runner
The standard Planted version includes its Recaro slider pattern. The alternate replaces that pattern with the Cobra/Scheel-Mann connection. Match the version to the runner you intend to use.
For a Cobra installation, identify the narrow or wide runner as well. Planted says the narrow version needs no modification, while the wide version uses its alternate pattern or a specified alteration to the standard connection.
Cameron would ask for the runner model if you already own one, together with photographs showing its holes and release mechanism.
Three Sparco buckets with different trim and mounting choices
The Sprint Retro gives Garreth a period trim option to try, while the Sprint Sky has a wipe-clean finish. Both Sprint listings include base and side fixing choices, with the actual runner and fixing arrangement checked against the seat version. Sit in the intended seat before deciding how its cushion and backrest suit you.
The Evo QRT Sky is a side-mounted shell, so its installation includes compatible side mounts above the runner. Measure its shoulder area and the space beside the door and tunnel. Use the mounting adjustments to establish the angle and height with the shell in the car.
The sliding runner for a Sparco assembly
The Sparco runner is the separate slider to compare for the Sparco seats shown here above the Planted bracket. Match its holes to the seat’s base fixings or to the chosen side mounts. Check the release handle and locking action with the assembly trial-positioned in the car.
Leave the buckle, trim and surrounding controls clear throughout the fore-and-aft travel. Follow the current instructions for each part of the assembly when choosing the hardware and final tightening.
Side mounts for the Evo QRT Sky
These Sparco steel side mounts are the fittings to compare for the Evo QRT Sky. Check the shell connection, runner connection and adjustment available through the complete stack. Cameron would establish the angle and height with the assembly in the car, including shoulder and door-side clearance.
Reclining seats to compare in the F13
The Sparco R100 and GT give you two cushion and backrest shapes to try. The RECARO Expert S adds adjustable backrest side bolsters and a shorter cushion choice within the Expert range. Each route needs its own matched runner and fixing check above the Planted bracket.
Garreth would sit in the options with the backrest set for normal driving. Cameron would then check the installed height, the room for the adjustment controls and the travel needed by each driver. Use the seat shape and adjustment to narrow the choice before picking a trim.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
£562.10Original price was: £562.10.£505.90Current price is: £505.90. Incl. VAT£468.42Original price was: £468.42.£421.58Current price is: £421.58. Excl. VATPayPal CreditKlarna ReadyAdd to basket -
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
A Recaro-width runner for the Expert S
The Endurance RECARO-compatible runner is the slider to compare for the Expert S above the standard-pattern Planted bracket. Confirm the actual hole connections and hardware through the seat, runner and vehicle bracket. Measure the finished height in the car with the seat positioned for pedal and steering-wheel reach.
Measure the Expert cushion and the space above it
RECARO’s Expert S/M drawing gives a maximum cushion envelope of 520mm wide and 545mm deep. Those dimensions exclude mounting hardware. The maximum overall seat height is 820mm, with shoulder clearance checked separately in the car.
Include the SB390, runner and any side mounts when checking the finished height. Use the drawing as a measuring aid, then check the actual seat around its bolsters and controls in the F13.
The mounting order through the car
Planted’s installation instructions start with a trial fit of the vehicle bracket, followed by the seat assembly and a check of the complete position.
- Base-mounted sliding seat: F13 floor, SB390 bracket, matched runner, seat.
- Side-mounted sliding bucket: F13 floor, SB390 bracket, matched runner, compatible side mounts, shell.
- Fixed mounting is another Planted arrangement, but can need holes drilled in the bracket and changes the adjustment available.
Follow the current instructions for the actual components, checking the floor connection and every fixing above it before the assembly is finally tightened.
Select the harness around the completed seat installation
The TRS Clubman four-point options give you clip-in or bolt-in end fittings to discuss with the intended anchor arrangement. The Schroth Profi 3×2 is a six-point option for an appropriate shell and full installation. Choose the seat and belt routing together, including the crotch-strap provision needed for a six-point belt.
Send photographs of the space behind the seats with the enquiry. Follow the harness maker’s current fitting instructions for the anchors and routing. A cage tube or harness bar is an anchor only where its maker specifies that use.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Try the backrest movement and rear-seat access
A fixed bucket changes how you move through the F13’s long door opening and reach the rear seats. Check that movement in the car before deciding on a shell. The Expert S has a tilt-forward release on both sides in RECARO’s specification, but its usable movement still needs checking against the surrounding trim and your installed position.
Details for your F13 seat enquiry
Send BMW 6 Series Coupé F13, year, body details, steering side and the physical seat position, plus the chosen seat model, your height and waist. Photograph any existing conversion and the clearance beside the tunnel and door. Tell us how many drivers need adjustment so the seat and fittings can be checked as one order.
Common questions
The BMW 6 Series Coupé F13 application named by Planted, using the SB390. Keep the chassis and body details with the enquiry.
A sliding installation uses a separate matched runner. Match it to the chosen seat and any side mounts above the vehicle bracket.
Planted’s driver/left naming follows left-hand drive. Order by physical side and steering position so the right-hand-drive driver position is identified correctly.
Choose compatible side mounts with the shell, runner and vehicle bracket, checking all hole connections and the complete position in the car.
Planted’s standard version includes its RECARO slider pattern. Confirm the actual runner and seat connections before ordering the full assembly.
Measure the complete bracket, runner, mounts and seat together in the car, positioned for your reach to the pedals and wheel. Check headroom and clearance for the bolsters and controls separately.
Garreth’s top tip
I would sit in the R100, GT and Expert S before choosing a road seat for the F13. If a fixed bucket suits the way you use the car, try that as well and check how it changes access through the long door. The support and the movement you need should decide the shortlist.
Cameron’s fitting view
I would confirm F13 Coupé and the physical seat side, then pair the runner and any side mounts with the chosen seat. Headroom needs checking with the whole assembly in place. I would also try the backrest movement and rear-seat access you expect to retain.
Plan your BMW 6 Series Coupé F13 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Manufacturer references: Planted F13 application and pattern options, installation arrangements, RECARO Expert S/M dimensions and controls. Model reference: BMW Group.

![Planted Technology BMW 6 Series Coupe [F13 Chassis] (2011-2018) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB390DR-1-300x300.jpg)









