Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

BMW 5 Series Touring F11 Bucket Seat Guide

Supportive seats for the pre-LCI 5 Series Touring

The F11 Touring brings the estate body to this generation of the 5 Series. A seat change may need to suit a circuit day and the journeys carrying passengers or luggage between events. Try the seat with that whole use in mind before matching the lower fittings.

The frame route here is Planted’s SB252 for 2011 to 2013 pre-LCI cars. Garreth would compare the fixed shells with the reclining seats before choosing. Cameron would keep the year, body and physical seat side with the exact seat model when checking the assembly.

Front three-quarter view of an illustrative modified blue BMW 5 Series Touring F11 with bucket race seats and red harnesses
Illustrative modified BMW 5 Series Touring F11, not a customer installation.

At a glance

  • Vehicle frame: Planted SB252, with F11 explicitly named in the maker’s application.
  • Scope: 2011 to 2013 pre-LCI models. Confirm the exact year and car details before ordering.
  • A sliding Planted installation uses a separate matched runner.
  • A side-mounted shell needs compatible side mounts as part of the assembly.
  • Order by physical left or right and steering side, checking the driver/passenger labels.
  • Measure the complete height and check shoulder, control and door-side clearance in the car.

The F11 Planted SB252 fitting route

Planted’s current application list names F10, F11 and F07 pre-LCI models from 2011 to 2013 for the SB252. For this F11 guide, keep the year and body details with the order. This bracket provides the vehicle connection for the seat fittings above it.

The maker separately lists an LCI application, so the SB252 range needs checking against the car. Send the chassis details and photographs of the existing mounts if you are unsure. A similar 5 Series name does not establish the same frame application.

Keep the pre-LCI frame range with the car details

The SB252 application is listed for 2011 to 2013 pre-LCI models. Keep that range with the exact chassis and model year when asking for a fitting recommendation. We would check a car near the changeover using its actual details before ordering the frame.

Left and right matter when ordering

Planted’s product pages call the left-hand bracket driver/left and the right-hand bracket passenger/right. That is its left-hand-drive naming, so a UK right-hand-drive driver sits on the opposite physical side.

Cameron would keep both the physical side and steering side on the enquiry. Include photographs if the current fittings have been adapted so the seat and bracket can be checked against the car as it stands.

Choose the Planted pattern with the runner

The standard Planted version includes its Recaro slider pattern. The alternate replaces that pattern with the Cobra/Scheel-Mann connection. Match the version to the runner you intend to use.

For a Cobra installation, identify the narrow or wide runner as well. Planted says the narrow version needs no modification, while the wide version uses its alternate pattern or a specified alteration to the standard connection.

Cameron would ask for the runner model if you already own one, together with photographs showing its holes and release mechanism.

Three Sparco buckets with different trim and mounting choices

The Sprint Retro and Sprint Sky give you two finishes to compare in the Sprint family. The Evo QRT Sky is a side-mounted shell, with compatible side mounts added to its lower assembly. Garreth would try the cushions and backrests before deciding on the finish.

Match the exact Sprint version and mounting choice to its runner. With the Evo, check both the shell and slider connections through the side mounts. Trial-position the full assembly for reach, shoulder clearance and entry through the door.

The sliding runner for a Sparco assembly

The Sparco runner is the separate slider to compare for the Sparco examples above the SB252. Match it to the chosen seat base or side mounts. Try the release and locking action through the useful travel with the assembly in the car.

Side mounts for the Evo QRT Sky

Compare these Sparco steel side mounts for the Evo QRT Sky. Check the shell and runner connections with the actual parts. Establish the angle and height with the assembly trial-positioned in the car.

Reclining seats to compare in the F11

The Sparco R100 and GT offer different cushion and backrest shapes to try, while the RECARO Expert S has adjustable backrest side bolsters. Each uses its own matched runner connection above the Planted bracket. Try the controls with the seat in its intended driving position.

Garreth would spend time in the options with the backrest set for a normal journey. Cameron would then check the installed height and the travel needed by every driver. Check the controls beside the console and door before choosing the seat.

A Recaro-width runner for the Expert S

The Endurance RECARO-compatible runner is the slider to compare for the Expert S on the standard-pattern SB252. Confirm the actual seat and runner connections before ordering. Measure the full installed height with the bracket and slider beneath the cushion.

Measure the Expert cushion and the space above it

RECARO’s Expert S/M drawing gives a maximum cushion envelope of 520mm wide and 545mm deep. Those dimensions exclude mounting hardware. The maximum overall seat height is 820mm, with shoulder clearance checked separately in the car.

RECARO Expert S and M maximum cushion envelope, 520mm wide and 545mm deep, drawn to scale520mm maximum cushion width545mm maximum cushion depthExpert S/M cushionPlan envelope, not a seat templateRECARO dimensions exclude all mounting hardware

Use the cushion envelope when measuring the F11, then check the seat’s shoulders and controls separately. The SB252 and runner sit outside these seat-only dimensions. Measure the actual completed assembly in the intended driving position.

The mounting order through the car

Planted’s installation instructions start with a trial fit of the vehicle bracket, followed by the seat assembly and a check of the complete position.

  • Base-mounted sliding seat: F11 floor, SB252 bracket, matched runner, seat.
  • Side-mounted sliding bucket: F11 floor, SB252 bracket, matched runner, compatible side mounts, shell.
  • Fixed mounting is another Planted arrangement, but can need holes drilled in the bracket and changes the adjustment available.

Follow the current instructions for the actual components, checking the floor connection and every fixing above it before the assembly is finally tightened.

Select the harness around the completed seat installation

The TRS Clubman four-point options give you clip-in or bolt-in end fittings to discuss with the intended anchor arrangement. The Schroth Profi 3×2 is a six-point option for an appropriate shell and full installation. Choose the seat and belt routing together, including the crotch-strap provision needed for a six-point belt.

Send photographs of the space behind the seats with the enquiry. Follow the harness maker’s current fitting instructions for the anchors and routing. A cage tube or harness bar is an anchor only where its maker specifies that use.

Check the position for every driver

Try the runner positions each driver needs, then check the space remaining for rear passengers. The recliner controls need room beside the console and door. Include how the rear space is used when discussing a seat or harness installation.

Details for your F11 seat enquiry

Send BMW 5 Series Touring F11, year, steering side and physical seat side, plus the exact seat model and your height and waist. Include photographs of the current mounts and clearance beside the tunnel and door. Tell us how much adjustment each driver needs.

For a harness installation, include photographs behind the front seats and describe how the rear seating is used. Choose the seat, belt routing and anchor arrangement together.

Common questions

The BMW 5 Series Touring F11, using Planted’s SB252 listing for 2011 to 2013 pre-LCI models. Confirm the exact year and body details before ordering.

A sliding installation uses a separate matched runner. Check the seat and any side mounts with that runner before ordering the full assembly.

Planted’s driver/left label follows left-hand drive. Order by physical side and steering position to identify a right-hand-drive seat correctly.

Match the shell with compatible side mounts and the runner above the vehicle bracket. Check the actual connections and completed position in the car.

The standard-pattern version includes the RECARO slider connection. Match the actual runner and seat connections before ordering the parts.

Measure the bracket, runner, mounts and seat together in the car, set for pedal and steering-wheel reach. Check shoulder clearance and the controls separately from the cushion envelope.

Garreth’s top tip

I would compare the recliners with the fixed shells before choosing seats for an F11 that still does regular journeys. Set the backrest where you drive and give yourself time in the cushion. The trim can follow once you know which support feels right.

Cameron’s fitting view

I would start with F11, year and physical seat side, then match the SB252, runner and seat together. Check the complete height and adjustment in the car. I would trial-position the assembly for reach and clearance before the fixings are finally tightened.

Plan your BMW 5 Series Touring F11 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Manufacturer references: Planted vehicle applications, BMW applications and pre-LCI/LCI distinction, Planted installation arrangements, RECARO Expert S/M dimensions and controls.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text