Audi ur-quattro Bucket Seat Guide
Seats for the original quattro coupe
Which seats would we put in an original Audi quattro? Its angular coupe body and rally history make a period-looking bucket an appealing choice. Audi introduced the car at Geneva in 1980 and kept the original model in production until 1991.
Garreth would ask whether you want that older trim style or a reclining seat for longer road journeys. Cameron would put the SB311 floor bracket, runner and seat fittings on the same order, with the final height checked in the car.

At a glance
- Vehicle application: original Audi quattro, 1980 to 1991.
- Listed floor bracket: Planted SB311, supplied for the chosen physical side.
- Manufacturer references: SB311DR is left; SB311PA is right.
- Sliding installation: floor bracket, matched runner, then the seat or side-mount assembly.
- Choose Planted’s slider pattern with the seat: standard includes Recaro; alternate substitutes the Cobra/Scheel-Mann pattern.
The Planted SB311 fitting bracket
We list the Planted SB311 for the Audi quattro from 1980 to 1991, matching Planted’s current application guide and its separate left and right product pages.
This is the vehicle-specific part beneath the seat fittings. It connects the quattro floor to an aftermarket mounting assembly. Plan the runner above it with the chosen seat, adding side mounts where the shell uses side fixings.
Give us the year and body details if you have a Sport quattro, a converted shell or altered floor mountings. The SB311 application needs to be checked against those details before treating it as the right part for the car.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Order by the physical side of the car
Planted’s SB311DR is its driver/left bracket, while SB311PA is passenger/right. Those descriptions follow a left-hand-drive layout. A right-hand-drive driver needs the right-hand side of the car.
Include left or right, the steering position and whether you are changing one seat or both when you send the order details to us.
Match the slider holes to the seat
Planted offers standard and alternate slider patterns on this bracket. Standard includes its Recaro slider connection; alternate substitutes the Cobra and Scheel-Mann pattern. Keep that choice beside the seat specification when ordering.
A Cobra runner also needs its narrow or wide version identified: Planted says the narrow slider needs no modification, while the wide version uses the alternate pattern or a specified hole alteration on the standard version.
Cameron would identify the runner before selecting that option. Send its model or a clear photograph of its fixings if you already own it. A seat brand alone leaves too much of the assembly unspecified.
Runner choices for the SB311
For a sliding installation we would compare the Sparco and OMP runners for their respective seat assemblies, with the Endurance Recaro-compatible runner for Recaro’s wider 405mm base spacing.
Choose one route to suit the seat and its actual fixing drawing. The Sparco runner and OMP HC0-0665 are separate products with their own fittings. A Recaro Expert S order starts with the Recaro-width connection on Planted’s standard pattern.
Test the full slider travel with the seat in position, including clearance around the buckle and the release handle. Garreth would keep that fore-and-aft adjustment if different drivers use the car.
How we would assemble the seat fittings
Start by checking the bare SB311 against the car’s original mounting positions, following Planted’s installation instructions and checking any existing alterations.
- Base-mounted seat with adjustment: quattro floor, SB311, matched runner, seat.
- Side-mounted bucket with adjustment: quattro floor, SB311, matched runner, compatible side mounts, shell.
- Check the complete height, seat angle and pedal reach in the car before settling on the mount positions.
Planted also describes direct mounting with the slider omitted, which can require holes to be drilled in the bracket. Choose that arrangement with the actual seat and side mounts. Fixed mounting changes the adjustment available to the driver.
Fixed-back buckets for a classic quattro
The Sparco Sprint Retro would be Garreth’s first trim style to try in a period-looking interior. It gives you an older visual style in a fixed-back seat. Compare its cushion and shoulder shape with your size before choosing it for the car.
The OMP TRS-X is another steel-frame bucket to compare, while the Sparco Evo QRT Sky gives a side-mounted shell option with wipe-clean upholstery for a more stripped interior.
Cameron would measure shoulder clearance and headroom with the mounting stack included. OMP’s catalogue gives the TRS-X Type Y bottom-fixing reference as 345mm x 270mm, so confirm its connection to the intended rails. The side-mounted Evo needs a compatible pair of side mounts.
Side mounts for the Sparco Evo route
These Sparco steel side mounts are the fitting component to compare for the Evo shell above its runner, checking their holes against both parts.
Try the assembled position in the coupe before choosing the height and angle. Check the door opening and room around the shoulder wings as well as the space directly below the seat.
Reclining seats for road journeys
The Sparco R100, Sparco GT and Recaro Expert S give you different cushion and backrest shapes to try for regular road use, especially if you spend longer stretches in the car.
The R100 and GT list 345mm x 271mm base fixings. The Expert S lists 405mm x 290mm and needs the matching Recaro-width runner connection. Keep each seat with its own fitting route when comparing the complete order.
Check rear-seat access with the exact seat mechanism on this two-door body. Ask us to confirm the forward-tilt function you need before ordering. Garreth would try the seat and its controls with that everyday use in mind.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
£562.10Original price was: £562.10.£505.90Current price is: £505.90. Incl. VAT£468.42Original price was: £468.42.£421.58Current price is: £421.58. Excl. VATPayPal CreditKlarna ReadyAdd to basket -
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Choose the harness with its mounting arrangement
The two TRS Clubman four-point options below use clip-in and bolt-in ends respectively. Their listings describe them as not HANS compatible. The Schroth Profi 3×2 is a six-point, HANS-friendly belt for an appropriate seat and complete installation.
Choose the belt ends to match the intended anchors and check the routing through the seat, including crotch-strap provision for a six-point arrangement.
Send photographs of the mounting area behind the seats with the belt enquiry. Follow the belt manufacturer’s fitting instructions. Use a cage tube or harness bar as an anchor only where its manufacturer specifies that purpose.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Measure the complete position in your quattro
Include the seat model, your height and waist, and photographs of the existing mounting area when you contact us about the conversion.
The floor bracket establishes the vehicle connection, while the seat, runner and side mounts determine the rest of the position. Check knee room and steering-wheel reach with the door shut. Leave enough headroom for the way the car will be used.
Common questions
Planted lists the Audi quattro from 1980 to 1991. Send the body and floor details for a Sport quattro, replica or converted shell so we can confirm the application for that car.
Planted uses DR for driver/left and PA for passenger/right in its own listing. Specify the physical side and steering position when ordering through a UK driver/passenger option.
The SB311 is the vehicle bracket. Choose the runner separately for a sliding installation, then include side mounts if the seat uses side fixings.
The standard pattern includes the Recaro slider connection. The alternate option substitutes the Cobra and Scheel-Mann pattern, so keep the chosen pattern with the actual runner specification.
Yes, use compatible side mounts with the shell and the selected runner or fixed mounting arrangement. Confirm the holes, height and cabin clearance through the complete assembly.
Check the exact seat’s forward-tilt mechanism and the space available in your coupe. Confirm the function with us before ordering a reclining seat for that purpose.
Garreth’s top tip
I would try the Sprint Retro if the cabin still has its older character. For longer road journeys I would also sit in the reclining options before deciding. The driving position and the seat’s shape matter as much as its trim.
Cameron’s fitting view
I would put the physical side and slider pattern on the order first, then check the complete height in the car. If the shell or floor has been changed, send photographs before the fittings are chosen.
Plan your Audi ur-quattro seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Manufacturer references: Planted SB311 left bracket and slider patterns, right bracket and installation instructions. Model history: Audi’s original quattro history. OMP Type Y dimensions: 2024 catalogue, printed pages 68 and 69.











