Audi S4 C4 Bucket Seat Guide
Seats for the original Audi 100-based S4
Which seat would we put in the original C4 S4? Audi introduced this performance version of the 100 in 1991, with a turbocharged five-cylinder engine and quattro drive. A period-looking interior and a more focused track build can lead to different seat choices.
Garreth would try a supportive recliner if longer road journeys are part of the plan. Cameron would begin the mounting assembly with the C4-specific Planted SB142 and work upwards through the runner to the seat.

At a glance
- Vehicle bracket: Planted SB142 for the Audi S4 C4, 1991 to 1994.
- Select the physical side: SB142DR is left; SB142PA is right in Planted’s own naming.
- For sliding adjustment, choose a runner with the actual seat and any side mounts.
- Planted standard and alternate versions use different slider-hole patterns.
- Check the complete height and shoulder clearance in the C4 cabin before settling on a seat.
The C4-specific SB142 bracket
Planted’s application for the SB142 is the Audi S4 C4 from 1991 to 1994, matching our listed vehicle bracket.
It adapts the car’s floor mounting positions to the aftermarket fittings above it. For a sliding installation, add a matched runner before the seat. A side-fixed shell also needs compatible side mounts in that assembly.
Keep the C4 chassis on the parts enquiry. Our later B5 S4 guide follows a different vehicle application. Send the body, year and photographs of any existing alterations if your car has already had a seat conversion.
Open the separate B5 S4 guide if that is the chassis you own.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Left and right matter when ordering
Planted calls SB142DR driver/left and SB142PA passenger/right. That follows its left-hand-drive naming. A right-hand-drive driver sits on the right.
Include the physical seat position and steering side when you send the order details, especially if the listing you are comparing uses driver/passenger labels from another market.
Choose the Planted pattern with the runner
The standard Planted version includes its Recaro slider pattern. The alternate replaces that pattern with the Cobra/Scheel-Mann connection. Match the version to the runner you intend to use.
For a Cobra installation, identify the narrow or wide runner as well. Planted says the narrow version needs no modification, while the wide version uses its alternate pattern or a specified alteration to the standard connection.
Cameron would ask for the runner model if you already own one, together with photographs showing its holes and release mechanism.
Three Sparco buckets with different trim and mounting choices
The Sprint Retro would be Garreth’s first trim style to try alongside an older Audi interior. Its period-looking finish gives you a different appearance from a plain modern competition shell. Try the seat for your own build before choosing the trim.
The Sprint Sky is the wipe-clean steel-frame option to compare if the interior sees frequent use, while the Evo QRT Sky is a side-mounted shell with its own side-mount requirements.
The Sprint listings include base and side fixing options. The Evo uses side mounts. Measure each seat around your hips and shoulders, then include the fittings beneath it when checking headroom in the C4.
The sliding runner for a Sparco assembly
The Sparco sliding runner is the starting point for the Sparco seats shown here, matched to their base fixings or the chosen side mounts above the SB142.
Check the mounting drawing through every part of the assembly. Try the release handle and full fore-and-aft travel in the car. Leave the buckle and surrounding trim clear of the moving mechanism.
Side mounts for the Evo QRT Sky
Compare these Sparco steel side mounts with the Evo shell and runner, confirming the hole positions and adjustment available on both connections.
Use the mount settings to establish the angle and height you need with the assembly positioned in the C4. Cameron would check shoulder clearance at the door and the room around the centre console before the position is finalised.
Recliners for a road-going C4 S4
The Sparco R100 and GT give you two cushion and backrest shapes to try for a road build. Their listings use a 345mm x 271mm base-fixing pattern. Compare the controls and support with your normal driving position.
The Recaro Expert S gives a shorter cushion and adjustable backrest side bolsters, with a wider 405mm x 290mm base pattern in its listing.
Garreth would sit in the options before choosing one for longer journeys. Cameron would then pair the seat with the correct runner width and confirm space for its recliner controls. Keep the Recaro choice on its own fitting route when comparing it with the Sparco seats.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
£562.10Original price was: £562.10.£505.90Current price is: £505.90. Incl. VAT£468.42Original price was: £468.42.£421.58Current price is: £421.58. Excl. VATPayPal CreditKlarna ReadyAdd to basket -
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
A Recaro-width runner for the Expert S
The Endurance Recaro-compatible runner is the separate slider to compare for the Expert S above a standard-pattern Planted bracket, with the holes and hardware checked against the complete assembly.
This route retains sliding adjustment for the driver. Measure its finished height in the car. A wider seat-side fixing pattern also changes the runner choice from the Sparco assembly.
Measure the Expert cushion and the space above it
RECARO’s Expert S/M drawing gives a maximum cushion envelope of 520mm wide and 545mm deep. Those dimensions exclude mounting hardware. The maximum overall seat height is 820mm, with shoulder clearance checked separately in the car.
Include the SB142, runner and any side mounts when measuring the installed height, then check your headroom with the seat set for pedal and steering-wheel reach.
The mounting order through the car
Planted’s installation instructions start with a trial fit of the vehicle bracket, followed by the seat assembly and a check of the complete position.
- Base-mounted sliding seat: C4 floor, SB142 bracket, matched runner, seat.
- Side-mounted sliding bucket: C4 floor, SB142 bracket, matched runner, compatible side mounts, shell.
- Fixed mounting is another Planted arrangement, but can need holes drilled in the bracket and changes the adjustment available.
Follow the current instructions for the actual components, checking the floor connection and every fixing above it before the assembly is finally tightened.
Select the harness around the completed seat installation
The TRS Clubman four-point options have clip-in or bolt-in ends to match the intended anchor arrangement. Their listings say they are not HANS compatible. The Schroth Profi 3×2 is a six-point, HANS-friendly belt for an appropriate shell and full installation.
Plan the belt routing through the seat and the mounting area behind it before choosing the ends, including crotch-strap provision for a six-point arrangement.
Send photographs of that area with the fitting enquiry. Use the harness manufacturer’s instructions. A cage tube or harness bar is an anchor only where the maker specifies that use.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Details for your C4 S4 seat enquiry
Send the year, body details, steering side and physical seat position with the exact seat model, plus your height and waist.
Photograph the existing mounts if the interior has already been changed. Tell us how many drivers use the car and what adjustment they need. We can then check the seat and fittings as one order.
Common questions
The C4, following Planted’s 1991 to 1994 SB142 application. The later B5 S4 has a separate guide and different vehicle brackets.
Planted uses DR for driver/left and PA for passenger/right. Match the physical side and steering position when ordering through a UK driver/passenger option.
For a sliding assembly, choose a matched runner above the SB142. Planted also describes fixed mounting arrangements, which can require holes in the bracket and give different adjustment.
Use compatible side mounts with the shell, runner and SB142, checking the fixing holes and complete position in the C4.
The standard pattern includes the Recaro slider connection. Confirm the actual runner and seat together before ordering the complete assembly.
Keep the exact chassis and year with the enquiry. This guide uses the explicit S4 C4 SB142 application; a different model name needs its own fitting check.
Garreth’s top tip
I would try the Sprint Retro if the car still has its older interior character. For a road-going S4, I would also spend time in the recliners before deciding. The cushion shape and how the controls fall to hand will matter on longer journeys.
Cameron’s fitting view
I would confirm C4, the physical side and the runner model at the start. The assembly then needs a height and clearance check in the car, with any existing seat conversion photographed before new parts are ordered.
Plan your Audi S4 C4 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Manufacturer references: Planted C4 S4 bracket and pattern options, left/right application references and installation arrangements. Seat dimensions: RECARO Expert S/M sheet. Model background: Volkswagen Group’s 1991 annual report.

![Planted Technology Audi S4 [C4 Chassis] (1991-1994) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB142PA-2-300x300.jpg)









