Audi Q7 First Generation Bucket Seat Guide
Recliners and bucket seats for the original Q7
What would we change if the original Q7 seat no longer suited the driver? Audi’s first-generation SUV ran from 2006 to 2015. For a road-going Q7, Garreth would start by trying a supportive reclining seat and checking how easily you can get in and out.
Cameron would compare the RECARO console with the Planted floor-bracket route before choosing runners, checking each manufacturer’s application dates and seat combinations.

At a glance
- RECARO application: Q7, 2006 to 2015, with manual or electric fore-and-aft adjustment listed in its catalogue.
- Planted application: first-generation Q7, 2007 to 2015, bracket SB295.
- RECARO’s catalogue distinguishes left 86.69.16 and right 86.69.26; match the physical side.
- Planted’s SB295DR is left and SB295PA is right, using its left-hand-drive naming.
- Choose the seat, slider arrangement and floor fitting as a complete assembly.
The RECARO console route
Our Q7 RECARO listing carries reference 866916-1789. RECARO’s own application table lists the 2006 to 2015 Q7 with console 86.69.16 on the left and 86.69.26 on the right.
The catalogue identifies compatible seat ranges individually, including Expert/Specialist and Ergomed E/ES. Choose the exact seat with the console and its matching slider arrangement. Give us the existing seat adjustment type and the physical side when confirming that combination.
Confirm the supplied console and slider components with Cameron before adding any separate runner.
RECARO seats to try for regular road use
The Expert S is worth trying if a shorter cushion suits your legs. RECARO describes adjustable backrest side bolsters on the Expert range. Set those around your body and check the reach to the pedals at the same time.
The Specialist M gives another cushion shape to compare, with a thigh extension for extra leg support and without the Expert’s adjustable backrest bolsters.
The Ergomed E adds electric height adjustment and manual tilt, with its own lumbar support arrangement. Include the seat’s electrical requirements in the fitting enquiry. Garreth would choose between these by sitting in them and checking the support on a longer journey, as well as the entry height.
-
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,270.08 Incl. VATFrom £1,058.40 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £2,299.50 Incl. VATFrom £1,916.25 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Use RECARO’s cushion dimensions when measuring
RECARO’s Expert S/M sheet gives a maximum cushion width of 520mm and maximum cushion depth of 545mm, excluding mounting hardware. Its maximum overall height is 820mm. Check the shoulder area separately when comparing the seat with your door and centre console.
Use the envelope as a measuring aid, then check the seat’s actual shape and installed position in the Q7.
The Planted SB295 route
Planted lists the SB295 for the first-generation Q7 from 2007 to 2015, with separate left and right brackets. Keep that range with a Planted order, especially if your car is a 2006 example.
The SB295 is the vehicle-specific bracket beneath the aftermarket seat fittings. For a sliding installation, add a runner matched to the chosen seat. Side-mounted shells also need compatible side mounts above that runner.
Standard and alternate Planted versions use different slider patterns. Standard includes the Recaro pattern; alternate substitutes the Cobra/Scheel-Mann pattern. Confirm the actual runner and, for Cobra, its narrow or wide version when choosing the bracket.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Separate runners for a Planted installation
For the Planted assembly, compare the Sparco runner with a suitable Sparco seat or side-mount combination, OMP HC0-0665 with its matched assembly, and the Endurance Recaro-compatible runner for the wider Recaro connection.
These are alternatives to choose between for the seat above the SB295. Check the fixing drawing through the complete assembly. Leave room for the slider release and make sure the full travel is usable in the car.
A RECARO console order needs its own component check before adding any of these separate runners. Cameron would keep the two fitting routes clear on the parts list.
Bucket seats for a more focused Q7 build
The Sparco Sprint and OMP TRS-X are steel-frame fixed-back seats to compare for a purpose-built interior. Both listings include base and side fixing options. Try the cushion shape and bolsters before choosing a shell size.
The Sparco Evo QRT Sky is a side-mounted shell with wipe-clean upholstery, so its Planted assembly needs compatible side mounts as well as a matched runner or fixed mounting arrangement.
A wide cabin still needs a full installation check. Measure the door opening, buckle area and final headroom. For the TRS-X, OMP’s catalogue gives the Type Y bottom-fixing reference as 345mm x 270mm, so check that connection with the actual rails.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Side mounts for the Evo shell
These Sparco steel side mounts are the component to compare for the Evo above its runner, checking the holes and adjustment against the selected shell and slider.
Fit the assembly in the Q7 before choosing its height and angle. Garreth would also try getting in and out with the seat set for the driver, since a deeper fixed bucket changes that movement.
Check the installed height and controls
Use the vehicle bracket or console for your selected route, then check every connection above it against the seat manufacturer’s instructions.
- Planted with a base-mounted seat: Q7 floor, SB295, matched runner, seat.
- Planted with a side-mounted bucket: Q7 floor, SB295, matched runner, compatible side mounts, shell.
- RECARO route: match the Q7 console and its slider components to the selected RECARO seat.
Planted also describes fixed mounting arrangements that may need new holes in its bracket. Decide how much adjustment the driver needs before choosing that route. Measure the finished eye line, pedal reach and room around the seat controls in the actual car.
Harness choices follow the seat and anchors
The TRS Clubman four-point clip-in and bolt-in belts use different end fittings, and both listings describe them as not HANS compatible. The Schroth Profi 3×2 is a six-point, HANS-friendly option for an appropriate shell and complete installation.
Choose a belt after identifying its intended mounting points and checking the routing through the chosen seat, including crotch-strap provision for a six-point installation.
Send photographs of the mounting area behind the front seats before choosing a harness for a Q7 conversion. Follow the belt manufacturer’s instructions. A cage tube or harness bar is an anchor only where its maker specifies that purpose.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
What to send us with a Q7 enquiry
Include the year, steering side, physical seat position and whether the original adjustment is manual or electric, together with the exact seat you want to fit.
Photograph the mounting area and any existing changes. Add your height and waist so we can narrow the seat shortlist. Cameron can then check the bracket and slider arrangement with the driving position you need.
Common questions
The first generation. RECARO’s table lists 2006 to 2015, while Planted’s SB295 application is 2007 to 2015. Keep the chosen fitting kit’s own year range with the order.
Start by checking the Q7 RECARO console application against the exact seat. Its table lists Expert/Specialist and Ergomed E/ES among the compatible ranges, with console and slider components confirmed for the selected side.
The SB295 is the floor bracket. Choose the runner for a sliding assembly, plus compatible side mounts where the shell uses side fixings.
DR is driver/left and PA passenger/right in Planted’s own left-hand-drive naming. Specify left or right and your steering position when using a UK driver/passenger option.
Use a matching side-mount assembly with the Planted bracket and selected runner or fixed mounting arrangement. Check the holes, cabin clearance and finished height together.
The complete bracket, runner and seat assembly sets the position. Measure it in the Q7; the vehicle bracket alone does not establish a lower seat height.
Garreth’s top tip
I would try the reclining seats first for a road-going Q7, paying attention to cushion length and getting in and out. If a fixed bucket is part of the build, try that movement with the bolsters and height you intend to use.
Cameron’s fitting view
I would keep the RECARO console route and the Planted route on separate fitting lists. Confirm the seat, physical side and adjustment components together before ordering. The two manufacturers also publish different starting years for this Q7.
Plan your Audi Q7 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Manufacturer references: RECARO console applications, printed page 1, Expert S/M dimensions, Ergomed E, Planted Q7 bracket and pattern options and installation arrangements. Model dates: Audi’s Q7 history. OMP Type Y reference: 2024 catalogue, printed pages 68 and 69.




![Planted Technology Audi Q7 [1st Generation] (2007-2015) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB295PA-1-300x300.jpg)






