Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Audi 90 Type 89 Bucket Seat Guide

Seat choices for the later Type 89 Audi 90

From May 1987, Audi offered its five-cylinder engines in the higher-positioned 90 sister model to the B3 Audi 80. This is the smoother-bodied Type 89 car. Its seat guide follows the Corbeau kit that explicitly lists Audi 80/90 Type 89/B4.

Garreth would try a supportive recliner before changing a road-going 90, with the GT8 as a fixed-back alternative for a more focused interior. Cameron would identify Type 89 and the existing floor fittings first. Keep the physical seat side and the exact seat model on the same enquiry.

Front three-quarter view of an illustrative modified pearl white Audi 90 Type 89 saloon with period wheels, bucket seats and yellow harnesses
Illustrative modified Audi 90 Type 89, not a customer installation.

At a glance

  • Vehicle kit: Corbeau Audi 80/90 Type 89/B4, with Audi 90 Type 89 identified on the enquiry.
  • Seat route: Corbeau base-mounted Classic buckets or Sportline recliners.
  • Double-locking sliding runners are included with the subframe kit.
  • One kit per seat position; specify the seat model and physical side.
  • Measure the complete assembly for headroom, controls and fore-and-aft travel.

The Corbeau fitting kit for Audi 90 Type 89

This Audi 90 guide uses the Type 89 part of our listed Corbeau Audi 80/90 Type 89/B4 fitting-kit application. That keeps it separate from the earlier Type 81/85 Audi 90 guide.

Specify Type 89, year, body details and steering side, then name the physical left or right seat position. Send photographs if the original fittings have been replaced or the floor has been modified. We can then check the chosen seat against the actual starting point in your car.

The Corbeau kit family supports its base-mounted Classic buckets and Sportline reclining seats. One kit serves one seat position, with the seat version and cushion width identified when the order is checked.

Use the runners supplied with the kit

Double-locking sliding runners are included with Corbeau’s subframe kits. Use the supplied runners as part of the vehicle kit; adding another universal slider is not a routine step in this assembly. Depending on the application, Corbeau supplies a full replacement frame or a bracket-and-runner arrangement, so confirm the supplied layout with the seat you are ordering.

  • Fit the vehicle-specific kit at the car’s original mounting positions, following its supplied instructions.
  • Attach the compatible base-mounted seat through the kit’s included runners using the specified hardware.
  • Trial-position the complete assembly for pedal reach, steering-wheel reach and headroom.
  • Operate the runner handle and check its locking action and full travel with the surrounding trim in place.

Use the current kit and seat instructions for the fixings and final tightening. Corbeau designs this route around base-mounted seats; a side-mounted shell needs its own supported mounting arrangement.

Three Corbeau retro buckets to try

Garreth would compare the GT8 with the Classic if the Audi 90 is keeping a period-looking interior. The GT8 has a fixed high back and shoulder openings; the Classic offers a lower-backed form with optional headrest and harness grommets. Sit in the intended version so the support is judged at your shoulders as well as your hips.

The Alpine is the quilted retro option, with a cloth centre and vinyl outer in Corbeau’s current range. It and the Classic offer two cushion widths. Cameron would measure the room at the centre tunnel and door before deciding which width belongs in the installation.

The Sportline RRS low-base recliner

The RRS low-base recliner brings an integrated headrest and an adjustable backrest to the Sportline route. Garreth would try it if the Audi 90 is used for longer journeys or you want to fine-tune the backrest position. Check the cushion and bolster support with your feet and hands in a normal driving position.

Measure the finished height with the Corbeau kit and runners included. The low-base seat version still needs that check in the car, together with room for its controls and full sliding travel.

Compare the Classic and GT8 base sizes

The Classic Standard base measures 470mm wide by 550mm deep in Corbeau’s current drawing, while the Wide is 500mm by 550mm. The GT8 base is 490mm by 540mm. The three rectangles show those A and B dimensions at one scale so you can compare the bases directly.

Corbeau seat base envelopes drawn to the same scale: Classic Standard 470 by 550mm, Classic Wide 500 by 550mm, GT8 490 by 540mmClassic Standard470mm wide550mm deepClassic Wide500mm wide550mm deepGT8490mm wide540mm deepMaker dimensions A and B; rectangles show base envelopesCheck bolsters, controls and mounting height separately in the car

Corbeau lists 700mm overall height on the Classic drawing and 930mm on the GT8 drawing. These figures describe the seats, with the mounting hardware and chosen headrest configuration checked separately. Use the full assembly when checking your headroom in the car.

Cameron would measure the room at the cushion and again around the shoulders. Check the bolster and control clearance beside the door and centre tunnel, then try the adjustment needed by everyone who drives the car.

A four-point harness option for the planned seat

The TRS Clubman clip-in four-point uses shoulder and lap straps with 50mm webbing and a push-button buckle. Discuss the end fittings and intended anchor arrangement with the seat choice. Its clip-in ends are useful where the belt needs to be removed between uses.

Choose the seat version with its belt path in mind, including the Classic’s optional harness grommets and headrest. Shoulder openings still need to line up with the driver once the complete seat assembly is positioned. Send photographs of the space behind the seats and follow the harness maker’s current instructions for the anchors and any permitted wrap-around routing.

Details to send with the fitting enquiry

Send Audi 90 Type 89, year, body, steering side and the physical seat position, together with the exact seat model and width. Include your height and waist, whether multiple drivers use the car, and clear photographs of any existing conversion. If the car has come from another market, include its chassis details so the model name is checked against the application.

Common questions

The Audi 90 Type 89 application. Identify the chassis, year and body details with the enquiry so the Corbeau Type 89/B4 listing is matched to your car.

Double-locking runners are included with this Corbeau kit family. Confirm the supplied frame or bracket layout with your exact seat and vehicle details.

One fitting kit serves one seat position. Specify both sides and the seat models if you are changing the pair.

The Corbeau base-mounted Classic range, including the Classic, Alpine and GT8 choices shown here. Confirm the actual seat version and width with the kit.

Corbeau specifies this kit family for base-mounted seats. A side-mounted competition shell needs a separately supported mounting arrangement.

Measure the seat with its vehicle kit and included runners, positioned for your pedal and steering-wheel reach. Check headroom and the space for the backrest, bolsters and adjustment controls.

Include the exact body, chassis details and photographs of the existing mounts. A shared model name or similar appearance does not establish every body or market application.

Garreth’s top tip

I would try the RRS first for a road-going Type 89 Audi 90, then sit in the GT8 to compare the fixed-back support. The Classic is also worth trying if the interior is staying restrained. A seat that suits your shoulders and cushion support will make the trim choice much easier.

Cameron’s fitting view

I would check Type 89 and the physical side before choosing the kit, especially on a car imported from another market. With the seat identified, I would measure the full assembly height and its movement beside the tunnel. Photographs of any old conversion help us check the parts you need now.

Plan your Audi 90 Type 89 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Fitting references: Corbeau subframe and included-runner guidance. Seat specifications and drawings: Classic, Alpine, GT8 and RRS low base. Harness reference: TRS Clubman four-point. Model background: Audi Tradition’s 2026 model history.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text