Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Audi 90 Type 81/85 Bucket Seat Guide

Retro buckets and reclining seats for the early Audi 90

Which seat would we choose for an early Audi 90? A retro fixed bucket can keep the cabin’s older character, while a reclining seat gives more freedom to adjust the backrest on road journeys. This guide covers the Type 81/85 application named on our Corbeau fitting kit.

Garreth would sit in the GT8 alongside a recliner before deciding how focused the interior should feel. Cameron would check the chassis type and existing mountings, particularly on a car that has already had its seats changed. Include photographs of the tunnel and the space behind the seats with the enquiry.

Front three-quarter view of an illustrative modified burgundy Audi 90 Type 81/85 saloon with cross-spoke wheels, black bucket seats and yellow harnesses
Illustrative modified Audi 90 Type 81/85, not a customer installation.

At a glance

  • Vehicle fitting kit: Corbeau Audi 80/90 Type 81/85.
  • Seat route: Corbeau base-mounted Classic buckets or Sportline recliners.
  • Double-locking sliding runners are included with the subframe kit.
  • One kit per seat position; specify the seat model and physical side.
  • Measure the complete assembly for headroom, controls and fore-and-aft travel.

The Corbeau Type 81/85 fitting kit

The Corbeau frame we list for the Audi 90 is shared with the Type 81/85 Audi 80 application. Use the chassis designation when ordering, together with the year and body details. The later Type 89/B4 listing is a separate fitting-kit application. If the car’s identity or floor fittings are unclear, send photographs before choosing the frame.

Corbeau specifies this kit family for its base-mounted Classic buckets and Sportline reclining seats. Select the physical side and exact seat model. Each kit serves one seat, so include both positions if the interior is being changed as a pair.

Use the runners supplied with the kit

Corbeau includes double-locking runners with its subframe kits. Keep them with the vehicle-specific brackets when planning the order; an extra universal slider is not a routine addition to this route. The kit can take the form of a complete replacement frame or brackets with runners, depending on the application. Confirm the supplied layout for your seat and car before installation.

  • Assembly route: original vehicle mounting points, vehicle-specific Corbeau kit with its included runners, compatible base-mounted seat.
  • Trial-position the assembly to check pedal reach, steering-wheel reach and headroom.
  • Check the runner handle, locking action and full travel with surrounding trim in place.

Use the instructions supplied with the actual kit and seat for the hardware and final tightening. This Corbeau kit family is designed around base fixings; a side-mounted competition shell needs its own supported fitting route.

Three Corbeau retro buckets to try

Garreth would start with the GT8 for an Audi 90 being built around a period motorsport appearance. It has a fixed high back, shoulder openings and an eyelet trim option. Try the backrest against your shoulders before choosing it for the car.

The Classic has a lower-backed shape with optional headrest and harness grommets. Its Standard and Wide versions give you a choice around the cushion, with piping and material options to coordinate with the interior. The Alpine is another base-mounted retro choice, with quilted detailing and a cloth centre in Corbeau’s current specification. Cameron would compare the chosen width with the room beside the console and door before the fitting kit is ordered.

The Sportline RRS low-base recliner

The RRS low-base Sportline seat is the reclining option shown here. It has an integrated headrest and an adjustable backrest, with the base mounted through the Corbeau kit and runners. For an Audi 90 used on longer journeys, Garreth would spend time in the cushion and try the backrest controls. The shape that feels right in a short sit still needs to work with your pedal reach and steering position.

Allow clearance for the recliner mechanism and full slider travel, checking the installed height with the seat in your driving position.

Compare the Classic and GT8 base sizes

Compare the bases before choosing the trim: Corbeau’s Classic Standard is 470mm wide by 550mm deep, and the Wide is 500mm by 550mm. The GT8 is 490mm by 540mm. These are the A and B measurements from the current maker drawings, shown at one scale below. They describe the seat bases, with the installation hardware and cabin clearance checked separately.

Corbeau seat base envelopes drawn to the same scale: Classic Standard 470 by 550mm, Classic Wide 500 by 550mm, GT8 490 by 540mmClassic Standard470mm wide550mm deepClassic Wide500mm wide550mm deepGT8490mm wide540mm deepMaker dimensions A and B; rectangles show base envelopesCheck bolsters, controls and mounting height separately in the car

The Classic drawing lists 700mm overall height, while the GT8 drawing lists 930mm. These seat measurements exclude the mounting assembly. Check the actual headrest configuration, upper bolsters and headroom with the seat positioned for you.

Cameron would measure the space between the tunnel and door, then repeat the check at shoulder height. Use your normal driving posture and include the kit and runners when measuring the installed position.

A four-point harness option for the planned seat

The TRS Clubman clip-in four-point is an option to discuss with the seat and intended anchor arrangement. Its shoulder and lap straps use 50mm webbing, with clip-in ends and a push-button buckle. Check the belt path on the exact seat version. Classic headrest and harness-grommet choices need deciding with the order, and the GT8’s shoulder openings still need to line up with the driver.

Send photographs of the area behind the seats so we can discuss the shoulder routing and anchor positions. Follow the harness maker’s current fitting instructions, including any permitted wrap-around arrangement.

Details to send with the fitting enquiry

Include Audi 90 Type 81/85, year, body details, steering side and the physical left or right seat position. Add the exact seat model and width, your height and waist, and whether one driver or several will use the car. Photograph the original mounts and any previous conversion. Garreth can then help narrow the seat choice, with Cameron checking the fitting parts and adjustment needed for the complete order.

Common questions

The Audi 90 Type 81/85 application named on our Corbeau Audi 80/90 fitting kit. Give us the exact year and body details with the chassis type when ordering.

Yes. Corbeau specifies double-locking runners with its subframe kits. Confirm the supplied kit layout with the exact seat and vehicle details.

Each fitting kit serves one seat position. Include both positions and the seat models if you are converting the pair.

Corbeau’s base-mounted Classic range, including the Classic, Alpine and GT8 options shown here. Confirm the seat version and width with the order.

Corbeau specifies this kit family for base-mounted seats. A side-mounted shell needs a separately supported fitting arrangement.

The installed height depends on the seat, fitting kit and runners together. Measure the finished assembly in the car before expecting a particular height change.

Those details need their own application check. This guide follows the explicit Type 81/85 listing; send the body and chassis information if the car differs.

Garreth’s top tip

I would put the GT8 and RRS on the shortlist for this Audi 90. The fixed high back gives the interior a period competition look, while the RRS lets you adjust the backrest for road use. Sit in both and decide which support shape you want to live with.

Cameron’s fitting view

I would confirm the Type 81/85 application and inspect any existing conversion before ordering. The Corbeau kit already includes runners, so the next check is how the selected seat and complete assembly sit in the Audi. Photograph the tunnel and door-side clearance as well as the floor connections.

Plan your Audi 90 Type 81/85 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Fitting references: Corbeau subframe and included-runner guidance. Seat specifications and drawings: Classic, Alpine, GT8 and RRS low base. Harness reference: TRS Clubman four-point.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text