Acura Planted Technology Seat Brackets Are Now Available
Fitting brackets, December 2020
We have added Planted Technology seat brackets for a wide range of Acura models. A Planted bracket bolts to the car's own seat mounting points and gives you a flat, slotted steel base to mount an aftermarket seat on, with or without runners.
Acura was Honda's North American badge, so several of these cars will be familiar in the UK under the Honda name. The range covers the CL, Integra, NSX, RSX, TL and TSX.
- New in December 2020: Planted Technology seat brackets for Acura
- Models: CL, CL Coupe, Integra, NSX, RSX, TL and TSX, across several years
- Several are Hondas in the UK: Integra DC2 and DC5, NSX, and the Accord (as the TSX)
- Planted brackets are car specific steel and use the factory seat mounting points
- Slotted for runners from most major seat brands

What is on this page
What a Planted bracket does
When the factory seat comes out, the new seat needs something to sit on that bolts into the car. A Planted Technology bracket is that part. Each one is made for a specific car, so it picks up the factory seat mounting holes and nothing has to be cut or drilled in the floor.
The top of the bracket is flat and slotted. Planted cut the slots to suit the runners (sliders) from most of the big seat makers, including Cobra, Corbeau, OMP, Recaro, Sabelt and Sparco, which is why we can recommend them with such a wide range of the seats we sell. A few seat and runner combinations need holes drilling in the bracket, and there is room on the bracket to do that.
Planted make the brackets in the USA from 3/16 inch steel, with a black finish. They are made one side at a time, so a pair of seats means ordering a driver side and a passenger side bracket.
A bucket seat goes on with a pair of side mounts, and you can add runners between the bracket and the side mounts so the seat slides. Planted say runners add roughly 3/4 of an inch to the seat height, so bolting the seat straight to the bracket sits it lowest.

The Acura models, and their Honda names
The Acura range we have added covers the CL (1997 to 1999) and CL Coupe (2001 to 2003), the Integra (1990 to 1993, and 1994 to 2001), the NSX (1991 to 2005), the RSX (2002 to 2006), the TL in three generations from 1996 to 2008, and the TSX (2004 to 2008, and 2009 to 2014).
Several of those are Hondas here. The 1994 to 2001 Integra is the Honda Integra DC2, the RSX is the Integra DC5, the NSX was sold in the UK as the Honda NSX, and the TSX is the European Honda Accord of the same years. The early Integra comes in two versions, with and without the US automatic seat belt retractor, so check which one your car has.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Right hand drive cars
Planted design their brackets on left hand drive cars. Where a right hand drive car shares the same floor, the brackets still fit, but the sides swap: Planted’s driver side bracket becomes the passenger side in a UK car. We list them by UK driver and passenger side to save the confusion.
Garreth’s advice is to send us the registration or the chassis number before ordering, so we can confirm the right bracket. Our Integra DC2 seat question shows the kind of detail we check.
Which Acura models did Planted brackets cover?
The CL, CL Coupe, Integra, NSX, RSX, TL and TSX, across the years listed on each bracket.
Do Acura Planted brackets fit the Honda versions?
The RSX bracket is for the Integra DC5, the 1994 to 2001 Integra bracket is the DC2, and the TSX brackets match the European Accord of the same years. Send us the registration to confirm.
Do Planted brackets need drilling into the car?
No. They bolt to the factory seat mounting points.
Do I need one bracket or two?
Brackets are made per side, so a pair of seats needs a driver side and a passenger side bracket.
💬
New for Acura and HondaPlanted Technology brackets
Car specific steel brackets that use the factory seat mountings.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




