Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Skoda Octavia Mk3 (5E) Bucket Seat and Fitting Guide

Start with the exact Recaro seat and lower assembly

If you are choosing seats for an Octavia Mk3, we would put the chassis code and the exact seat model on the enquiry first. Our Recaro fitting listings name the Mk3, and the manufacturer’s Sportster-family application identifies the 5E. The lower fittings still need matching to the seat version and the actual car.

Garreth would try the cushion and bolsters before choosing the trim. Cameron would work through the adapter, adjustment mechanism and mounting height with you. Tell us whether the car has a liftback or estate body and which seating side you want to change.

At a glance

  • Identify the 5E chassis, body, build and physical seating side before choosing the complete fitting package.
  • The researched Recaro application is specific to its Sportster and Cross Sportster family.
  • Use complete maker adapter and runner references when confirming the order.
  • The maker’s height-component conditions form part of the lower assembly; include them in the quote.
  • A reclining Sportster and a fixed bucket need different seat-interface checks.
  • Cross Sportster comfort dimensions help compare the cushion; trial the outer clearance and installed position in the car.

Identify your Octavia and its existing seat fittings

Send the chassis code, build year, original market and steering side with your enquiry. Include photographs beneath the existing seat and identify the physical left or right position. We would check a previously converted car against its actual floor connections.

The manufacturer’s application names both Octavia liftback and estate versions of the 5E. Match your car to the complete application and its conditions before selecting the parts.

An earlier Octavia needs its own generation-specific fitting check. Cameron would also record the driving position you want to keep or change. Tell us if the sliding mechanism or the complete lower assembly has already been replaced.

Specify the Octavia fitting with the complete seat package

RECARO’s Sportster/Cross Sportster application lists the 5E with adapter references 87.11.15A and 87.11.25A. Our Octavia-specific listing below uses the shop reference 871115A-1. Ask us to confirm the full supplied maker reference and physical side on the quote.

Match that adapter to the exact seat and all of its lower components. The current listing is for the fitting enquiry; the seat is a separate item. A complete quotation needs the specified adjustment and height parts as well.

For a pair, identify both physical seating sides and the components required beneath each seat.

Check the shared Recaro listing against the same assembly

We also list a Recaro frame under Golf Mk7, Octavia Mk3 and Leon 5F together. Treat that shared catalogue entry as another fitting reference to check against the exact Octavia package. The shop suffix on a listing does not identify every part supplied for a particular seating side.

Send us either product link with the seat you want. We will check which complete assembly the enquiry needs before you order the floor fitting and its upper parts.

Choose between Sportster and Cross Sportster cushions

The standard Sportster CS, the heated Sportster CS and the Cross Sportster CS give you three versions to discuss with this Recaro fitting route. Choose the exact current seat reference, trim and seating side. Confirm its package against the car before placing the order.

The Cross Sportster has a flatter seat cushion for easier access. Try that shape alongside the standard Sportster’s bolsters, especially if you get in and out frequently. Garreth would make that choice from how the seat feels and how you use the car.

For the heated option, include the heater specification in the fitting enquiry. Cameron would check the complete seat version and its installation requirements with the chosen lower assembly.

Specify the Recaro manual adjustment components

The manufacturer’s application describes optional manual rail assemblies 7208800.1A/7208800.2A or 7208800.1B/7208800.2B. Confirm the full reference with the actual seat and adapter. The door-side and tunnel-side components also depend on the physical seating side.

Our manual tracking listing uses an abbreviated shop code, so ask us to identify the complete supplied version.

Put the required sliding adjustment on the enquiry before choosing the lower parts. Use the mechanism specified for the matched assembly and check its locking action during fitting. A general runner’s bolt spacing alone does not establish the complete connection.

Include the specified height components

The Sportster-family application includes a 20mm height component, with a specified 40mm alternative. Confirm which matched parts belong in the chosen assembly before ordering. Those requirements need to be included when setting the seat position.

A component’s thickness does not predict the change in your seated height.

Compare the complete seat, cushion and lower hardware with the original driving position. Cameron would trial pedal reach and wheel access with the intended driver in the car. Leave room to check the backrest through the adjustment range you plan to use.

Plan a fixed bucket-seat installation separately

A fixed bucket connects differently from a bottom-mounted Sportster. Identify the exact shell and the matching upper supports, then confirm the complete lower connection for the 5E. The seat brand alone cannot settle that package.

The Sportster-family application discussed here establishes a specific seat route.

If you want a Pole Position or another fixed shell, send us the full model and size before choosing the fittings. We would check that seat’s own application and mounting instruction with the intended floor assembly. Include the restraint you want to retain or fit in the same enquiry.

Compare the Cross Sportster comfort dimensions

RECARO gives the Cross Sportster CS an 885mm backrest-height measurement from the cushion top, a 310mm cushion width and a 500mm cushion depth. These are comfort measurements. Use them when comparing the seating surface and backrest with a seat you have tried.

The width excludes the side bolsters and is measured 120mm ahead of the backrest. Cushion depth runs horizontally from its front edge to the bottom of the backrest. The complete seat’s outer clearance still needs measuring on the intended fittings in the Octavia.

Cross Sportster CS comfort dimensions drawn to a common scaleBars use 0.7 units per millimetre. A is 885mm backrest height from the cushion top; B is 310mm cushion width excluding side bolsters; C is 500mm horizontal cushion depth. Tolerance is 10mm either way. These are comfort measurements, not an outer seat outline.RECARO Cross Sportster CS comfort dimensionsA: Backrest height885mmB: Cushion width310mmC: Cushion depth500mm100mm scale reference
Source: RECARO aftermarket brochure, pages 48-49. Maker tolerance is ±10mm. Adjustable-backrest measurements use a 73-74 degree backrest angle.

Trial access, controls and the installed position

Try entry and exit with the seat at the intended height. Check the recline controls beside the door and tunnel, then move the backrest through its useful range. Close the door while checking the outer bolsters and shoulder area.

For the driver, set the position with the footwear and driving posture you normally use.

Check full pedal movement, wheel reach and the belt path with the seat secured in the trial position. Repeat the clearance checks through the sliding range. Garreth would settle that position before choosing between trims or adding the second seat to the order.

Choose the belt with the exact seat version

The manufacturer describes Sportster CS for three-point and four-point restraint use. Match the belt to the exact seat and its instructions, then check the actual anchorage arrangement in the car. A frame application alone does not establish a harness installation.

Keep the buckle and belt-routing checks in the complete fitting specification.

For a four-point harness, give us the full belt reference and intended anchorages before ordering it with the seat. Follow both manufacturers’ instructions for that combination. A competition shell and its restraint arrangement need their own checks if you choose a fixed bucket route instead.

Build and check the complete assembly

Lay out the identified seat, adapter, adjustment mechanism and height components against the current instructions. Confirm the physical side and supplied fixing references. Include any parts retained from the original seat arrangement in that check.

Trial the assembly before finalising its position and fixings.

Use the component manufacturer’s fitting procedure for the completed package. Check adjustment and locking after assembly, then inspect the controls and restraint routing from the seated position. If a reference or connection is unclear, send us photographs so we can confirm the intended parts with you.

Common questions

Which Octavia does this guide cover?

The Mk3, identified here by chassis code 5E. Include the body, build and original market when requesting the complete fitting specification. Earlier-generation Octavias need their own application.

Which Recaro seat route has been checked?

The manufacturer application checked here is for Sportster and Cross Sportster variants. The exact seat version and complete car-specific assembly still need matching before ordering.

Do I need side mounts for a Sportster CS?

The Sportster is a bottom-mounted reclining seat. Specify its intended lower assembly and adjustment parts. Side supports for a competition shell make a different connection.

Why are there two frame listings?

One names the Octavia specifically, while the other lists several vehicle applications. Give us either link and the complete seat reference so we can confirm the actual supplied parts and physical side. The catalogue names do not establish two different approved assemblies.

Is the manual tracking runner included with the frame?

Confirm the contents of the quoted package before ordering. The separate runner listing identifies an enquiry option, while the complete maker reference depends on the selected assembly and side.

How much lower will the seat sit?

Measure the completed seat and lower hardware against the original driving position. The application’s height components are individual parts, not a guaranteed net lowering figure.

Which cushion should I try first?

Try the standard Sportster and the flatter Cross Sportster cushion for support and entry. Choose with the bolsters, controls and intended installed position in mind. Garreth would settle that before choosing the trim.

Does the Cross Sportster measurement show its outer width?

The comfort-width figure describes the cushion without its side bolsters. Outer clearance needs a separate check in the car. Use the maker’s measurement definitions when comparing seats.

Can I use the same fitting for a fixed bucket?

Confirm the exact shell, upper supports and lower assembly as a separate package. A Sportster application does not establish the complete fitting for every Recaro seat.

Can I order both sides together?

Identify the physical left and right seating positions and the exact seat versions for each. Confirm the complete supplied references, controls and adjustment requirements on the quote.

Can I retain the original three-point belt?

Check the selected seat’s instruction, buckle position and belt route with the complete installed assembly. Include the car’s actual restraint arrangement in the fitting enquiry.

What should I send for a recommendation?

Send the chassis code, build, body and steering side with photographs of the existing mountings. Add the exact seat model, the position you want to change and whether you need sliding adjustment.

Garreth’s top tip

Garreth would start by trying the standard and Cross cushions, then choose the seat around support and access. Take time over getting in and out. Put that seat and its complete matching fitting package on the same quotation before settling the trim.

Cameron’s fitting view

Cameron would check the full adapter and rail references with the seat version and physical side. The height components belong in that same assembly check. Send photographs of the original mountings and the driving position you want, so we can work through the complete specification with you.

Plan your Skoda Octavia Mk3 (5E) seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Manufacturer references: RECARO Sportster/Cross Sportster application document, Sportster CS, Cross Sportster CS, seat manual and aftermarket brochure.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text