Ford Fusion US 2013-on Bucket Seat Guide
Plan the seat change for your US Fusion
For the second-generation US Fusion, we would choose the seat and its complete fitting assembly together. Our Planted SB323 listing provides the vehicle-bracket starting point for the maker’s 2013-on application. The exact seat, runner and physical side then determine the remaining parts.
Garreth would try the support of a fixed bucket and the movement of a recliner before choosing a finish. Cameron would begin with the car’s actual model year, market and original-seat details. Send a photograph of the car as well as its current front-seat arrangement.

At a glance
- Vehicle: second-generation US-market Ford Fusion saloon, following Planted’s 2013+ application label.
- Bracket family: SB323. Current manufacturer references are SB323DR for physical left and SB323PA for physical right.
- Identify the actual driving side: Planted’s US Driver / Left wording differs from our shop’s RHD option labels.
- Confirm the runner version and Standard or Alternate bracket pattern as one combination.
- Give the exact trim and powertrain, including Sport, Hybrid or Energi where applicable; the broad maker title does not resolve every version.
- The scaled 345mm x 271mm drawing describes the illustrated Sparco seat-side centres, separate from vehicle floor mounts.
Identify the saloon and its original seat equipment
This guide follows Planted’s second-generation Fusion application from 2013 onwards. Use the actual model year and market when confirming the bracket. The older European Fusion hatchback is a separate vehicle with different fitting listings.
Our store also lists Recaro parts under the Fusion name alongside Fiesta applications. Keep those European-hatchback references separate from SB323. A related platform or a similar body name cannot establish a UK Mondeo bracket match.
Ford’s 2017 Hybrid and Energi owner guide shows manual, six-way powered and ten-way powered seat arrangements, with memory functions where equipped. Cameron would record what the individual car has before replacing it. Include the adjustment and comfort features the owner wants to retain, because an aftermarket seat assembly does not establish their retention.
Match SB323 to the physical side
Our current Planted Fusion listing carries SB323. The maker’s live physical-left reference is SB323DR; the physical-right reference is SB323PA. Both name the second-generation Fusion 2013+ application.
For a left-hand-drive car, the driver sits on the physical left. A right-hand-drive driver sits on the physical right. Cameron would confirm the side in words alongside the part reference, particularly because our shop options use RHD driver and passenger wording.
Keep the car’s exact trim, powertrain and original mount details with the order. The current maker title does not provide a separate approval for every Sport, Hybrid or Energi configuration. We would resolve any version or modified-floor question before selecting the supplied bracket.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the bracket pattern to the chosen slider
Planted’s Standard option includes its Recaro slider pattern. The Alternate option replaces that pattern with the Cobra and Scheel-Mann arrangement. The current Fusion entries also show COBRA-prefixed SB323 variant references.
Cobra narrow and wide runner versions have different requirements in the maker’s notes. Specify the actual runner and bracket option together. Garreth would settle on the complete combination before adding separate fittings to the basket.
The vehicle bracket, slider and seat have separate connections. Cameron would compare the exact drawings at each one. A nominal dimension on the seat does not establish the pattern beneath the runner.
Compare Sprint, Sprint Sky and Sprint L
Sprint and Sprint Sky offer two finishes in a fixed-back family, with Sprint L providing a larger version to try. Garreth would compare the support at the hips and shoulders with the driver seated. Include normal entry and exit before deciding on upholstery.
Sparco’s cited catalogue gives the illustrated Sprint and Sprint Sky families 345mm x 271mm lower fixings and 290mm lateral spacing. Match the current supplied version to its instructions when choosing lower or side fixings. These are seat connections, separate from the Fusion’s interior clearance.
Trial the intended shell with its complete lower assembly in the actual car. Check beside the door and centre console as well as above the driver’s head. Cameron would confirm belt-buckle access and adjustment travel before the fitting position is final.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Connect a side-mounted shell through its supports
The Sparco steel side supports shown here are an option to discuss for a shell using lateral fixings. They connect the seat through its sides, with the support base joining the confirmed lower assembly. Follow the exact shell and support instructions when selecting holes and inclination.
Planted describes different arrangements for side-mounted seats with and without sliders. A fixed arrangement can require a new bracket hole pattern. Cameron would confirm the final position and hardware before any bracket modification.
Include sliding movement in the complete fitting plan
The current Sparco runner listing carries 0049306. It is a separate sliding option to discuss with the Sparco seats shown here, with its upper and lower connections confirmed. Planted names Sparco among the slider brands accepted by its slotted bracket family.
Record the supplied runner version and handle arrangement before assembly. Check the order contents before adding another set. Cameron would trial parallel travel, release and locking with the seat in position.
Garreth would try wheel and pedal reach with the cushion and every lower fitting included. Check the headroom needed for the intended use. Neither SB323 nor the runner reference predicts the finished cushion height.
Compare the Sparco lower fixing centres at one scale
The cited Sparco catalogue gives 345mm across and 271mm front to rear for the illustrated Sprint, R100 and R333 lower-fixing families. Both dimensions use one scale in this drawing. The outer outline is schematic.
Use the centres to check the exact seat’s lower interface. They do not describe SB323’s complete slot layout, the Fusion floor pattern or the outside width of the shell. Cameron would check the other connections from their own drawings.
R100, R100 vinyl and R333 reclining choices
The R100 fabric and vinyl choices give two finishes of a reclining family, while the R333 has a different bolster and cushion shape. Garreth would compare the support and ease of getting into each. Operate the backrest through the range needed for the car’s use.
Sparco’s catalogue gives the R100 family and R333 345mm x 271mm lower fixings. Confirm the exact supplied seat, runner and SB323 pattern as a complete assembly. Shared seat-side centres do not establish cabin clearance or a height change.
Cameron would try the reclining controls beside the tunnel, door and any retained console. Check the space behind the backrest as it moves. Include the required passenger use in the final trial before tightening the assembly.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £449.47 Incl. VATFrom £374.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Choose the belt layout with the seat
The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.
Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the vehicle bracket before completing the assembly
Begin with the actual floor mounts and a record of earlier changes. Planted’s guidance calls for checking the components and trial-fitting the vehicle bracket before assembling the complete seat. Identify retained parts and required fasteners from the current vehicle and kit instructions.
Follow the appropriate Planted arrangement for lower or side fixings, with or without sliders. The maker describes assembling the confirmed components outside the car before trialling the complete seat inside it. Keep the chosen seat and runner instructions available at the same time.
Identify the attachment and hardware for the belt buckle or retained belt arrangement. The seat bracket does not establish a complete harness installation. Cameron would check buckle access with the driver seated.
Check the wheel, pedals, headroom and clearance beside the door and tunnel in the intended position. Operate the rails and reclining controls through the movement required. Garreth would try entry and exit, while Cameron would repeat adjustment and locking checks after final tightening.
Common questions
Which Fusion does this guide cover?
The application is Planted’s second-generation US Fusion from 2013 onwards. The older European Fusion hatchback has separate fitting listings. Give the actual model year, market and trim when confirming the parts.
Can SB323 be assumed to fit a UK Mondeo?
Confirm the exact vehicle and mounts before ordering. Planted develops its brackets from US vehicles and says international versions need verification. A related platform alone does not prove the bracket application.
Which reference is physical left or right?
SB323DR is the current physical-left reference and SB323PA is physical right. Planted labels these US Driver / Left and Passenger / Right. State the actual side as well as the driving side when ordering from our RHD-labelled shop options.
Are Sport, Hybrid and Energi versions all confirmed?
The maker’s current title gives the broad Fusion application without a separate breakdown of those versions. Supply the exact model and original-seat details. We would confirm the individual version and supplied bracket before ordering.
What changes between Standard and Alternate patterns?
Standard includes Planted’s Recaro slider pattern. Alternate replaces it with the Cobra and Scheel-Mann arrangement. Match the exact runner, including Cobra narrow or wide requirements, to the selected bracket option.
Does the bracket include runners or side supports?
Check the actual package contents against the intended seat arrangement. The vehicle bracket, runners, side supports where required and hardware are separate parts to assess. Avoid ordering another runner set until the supplied contents are clear.
Will the original powered or memory adjustment remain?
An aftermarket seat with its own lower fittings does not establish retention of the original adjustment equipment. Record manual or powered adjustment and the features wanted for the finished car. Confirm that plan before replacing the original assembly.
What do the 345mm x 271mm dimensions describe?
They are the illustrated Sparco lower seat-side fixing centres. They do not give the Fusion floor pattern or complete bracket slot layout. Trial the exact seat and lower fittings for position and clearance.
Can I use a fixed arrangement without sliders?
Planted describes fixed and sliding installation arrangements separately. A fixed installation can require a new bracket hole pattern. Confirm the seat, lower components, final position and hardware before any modification.
Garreth’s top tip
Garreth would choose support and adjustment around how the Fusion is used. Try the intended seat size and the movement over its bolster before selecting the finish. Include the passenger’s needs when planning both front positions.
Cameron’s fitting view
Cameron would start with the US model, actual year and physical side, then match SB323 to the exact runner. He would record original equipment and any earlier mount changes. The trial assembly establishes the position and clearances that catalogue centres cannot provide.
Plan your Ford Fusion US 2013-on seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted current Fusion physical-left application; physical-right application; Planted installation arrangements; Planted fitting and international-model FAQs; Ford 2017 Hybrid and Energi owner guide, printed pages 124–127; Sparco 2025 seat and runner catalogue, retained manufacturer dimensions; current linked shop listings.

![Planted Technology Ford Fusion [2nd Generation] (2013+) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB323DR-1-300x300.jpg)








