Fiat Uno Bucket Seat Guide
Choose the Uno seat and the fittings beneath it together
For the classic Uno, we have an OMP vehicle adaptor and a separate Corbeau fitting-kit listing to discuss. Start with the seat you want and the exact car, including its year and physical seating side. The two brands use different fitting arrangements, so the parts below the cushion need choosing as a complete assembly.
Garreth would try a fixed-back bucket for support and a recliner for the movement you want to retain. Cameron would check the current kit reference, existing mounts and seat instructions together. On a three-door Uno, include the rear-seat access you still need before settling on the shell.

At a glance
- OMP shop listing: HC739. The manufacturer’s current Uno adaptor is HD0-0739, with application notation >83<00 and right/left seating sides.
- The OMP drawing gives a 345mm x 270mm inner seat-side pattern; this is separate from the Uno floor fixings.
- A side-mounted OMP shell needs its matching side supports and a checked connection to the vehicle adaptor.
- Corbeau shop listing: FIATUNO. Confirm the exact vehicle year, seating side and current supplied kit.
- Corbeau’s subframe family is for base-mounted Sportline recliners and Classic buckets, with double-locking runners included in that family arrangement.
The OMP Uno vehicle adaptor
Our OMP Uno listing carries reference HC739. OMP’s current own product page identifies its Uno adaptor as HD0-0739, with the year notation >83<00 and side description right/left. Keep both references on the enquiry so the actual supplied kit and instructions can be confirmed.
The manufacturer names Uno without limiting that entry to Turbo models. Include the exact year, body and any earlier changes to the mounts. The application notation is a fitting reference, not a statement that every Uno produced in every market uses the same arrangement.
Cameron would record the physical seating side as well as the driving side. In a right-hand-drive car, the driver occupies the physical right. Confirm the supplied adaptor and each seat connection before ordering the parts above it.
-
From £99.36 Incl. VATFrom £82.80 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare Champ-R, TRS-E Velour and TRS-E Sky
The Champ-R is a fibreglass-shell option with side fixings. The TRS-E choices give velour and vinyl surfaces to compare. Try the support at the hips, shoulders and thighs before deciding which finish suits the car.
OMP’s 2024 table marks Champ-R and the listed TRS-E Velour reference with W side fixings. It marks TRS-E Sky with W and Y, identifying side and lower fixing arrangements. Cameron would match the exact supplied seat reference to its drawing before choosing either assembly.
Garreth would also try getting over the bolster and reaching the backrest area in the Uno. A fixed shell keeps its backrest angle, which affects how you use the rear of a three-door car. The product cards give seats to assess, without promising clearance beside the door or tunnel.
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Connect a side-mounted shell through its supports
OMP’s low-profile steel side mounts are a support option to check with a shell using lateral fixings. The seat connects through its sides, and the support base then connects to the confirmed lower arrangement. OMP’s mounting examples show the side supports, optional sliding assembly and vehicle adaptor as separate parts.
Match the exact shell and support instructions, including the fasteners and permitted fixing positions. The bracket name alone cannot predict the final cushion height. Trial the assembled seat with the driver before choosing its inclination.
Add HC0-0665 sliding adjustment when the assembly needs it
OMP describes HC0-0665 as a steel sliding rail kit mounted between the brackets and seat. It is the runner option to discuss for the OMP route when fore-and-aft adjustment is wanted. Confirm the connections, handle position and travel with the selected seat and vehicle adaptor.
Cameron would establish which adjustment parts are actually supplied before adding another set. Include both rail operation and buckle access in the trial fit. The runner and every support beneath the cushion affect the finished driving posture.
OMP’s 345mm x 270mm inner seat-side pattern
The current OMP Uno product page shows an inner pattern of 345mm across by 270mm front to rear for the seat or seat-and-brackets connection. The diagram draws those centres at one scale. Its pale outer outline is schematic, with no Uno floor or supplied-frame dimensions implied.
Use the actual seat and lower-assembly instructions to select the correct connections. OMP shows other holes on its full drawing as well. A shared nominal pattern does not establish that a different brand’s seat can be fitted directly.
Check the FIATUNO kit for a Corbeau seat
Our Corbeau Uno fitting kit is listed as FIATUNO. Corbeau’s current subframe information describes its family for base-mounted Sportline reclining seats and Classic bucket seats. It asks for the make, model and year to confirm the vehicle application.
Keep the exact Uno year, body and physical seating side with this enquiry. The manufacturer’s general family page does not identify a separate Uno date range or side code. Cameron would confirm the current tailored kit and its instructions before completing this alternative order.
Corbeau says its subframe family includes double-locking runners and is not designed for side-mounted seats. Check that the supplied Uno package follows that arrangement. An OMP runner or side-mounted competition shell should not be added to it from the brand names alone.
Try the Corbeau RRS Low Base reclining shape
The RRS Low Base is a Sportline recliner to discuss with the confirmed Corbeau fitting kit. Corbeau describes an adjustable backrest and forward tilt, and recommends its subframe-and-slider combination. Try the cushion and bolster shape before choosing the upholstery.
Garreth would operate the forward tilt and try the access behind the seat in the actual three-door body. Cameron would check the controls and the backrest’s required clearance. The Low Base product name does not establish how much lower it will sit in an Uno.
A reclining backrest gives a different range of movement from a fixed shell. Include regular passenger use and entry into the car in that decision. Confirm the exact seat version and complete vehicle arrangement before ordering.
-
From £498.00 Incl. VATFrom £415.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Choose the belt layout with the seat
The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.
Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the complete seat position in your Uno
Photograph the existing rails and their connection to the car, and record any earlier adaptor plates or interior changes. Match the current seat, vehicle kit and adjustment parts to their supplied instructions. Identify every retained part and the required fasteners at each connection.
With the driver seated, check the wheel, pedals, headroom and buckle access. Move the runner through the required travel and check clearance with the door closed. Garreth would try normal entry and exit; Cameron would repeat movement and locking checks after tightening.
Common questions
The OMP listing carries HC739, while the Corbeau listing carries FIATUNO. OMP’s current manufacturer page identifies its Uno adaptor as HD0-0739. Confirm the actual supplied reference and complete assembly for your year and seating side.
OMP’s cited manufacturer entry names Uno with application notation >83<00, without a Turbo-only restriction. Give us the actual year, body and original mounts so the supplied application can be checked. The notation is not a guarantee for every market version.
The cited OMP table marks Champ-R and TRS-E Velour with W side fixings. TRS-E Sky is marked W and Y for side and lower arrangements. Confirm the exact supplied version and its instructions before choosing supports and runners.
They describe OMP’s inner seat-side pattern for the seat or seat-and-brackets assembly. They do not give the Uno floor-hole pattern or cabin clearance. Check the exact interfaces and the seat’s outside dimensions separately.
Corbeau describes double-locking runners as included in its subframe family. Confirm the contents of the actual FIATUNO package and its connection to the chosen seat. Check those contents before ordering additional rails.
Corbeau states that its subframes are not designed for side-mounted seats. Its stated family covers base-mounted Sportline recliners and Classic buckets. Plan a lateral-fixing competition shell with its own matching supports and vehicle connection.
Try the actual seat’s movement and access in the car before choosing it. A fixed-back shell and the RRS forward-tilt arrangement work differently. Include the runner travel, door opening and passenger use you need in that trial.
The cushion, runner and vehicle fittings together determine the finished position. Trial the complete assembly with the driver and check control reach as well as headroom. The seat name alone cannot predict a height change.
Garreth’s top tip
Garreth would sit in the Champ-R and TRS-E shapes before choosing between velour and vinyl. If backrest movement matters, try the RRS recliner and its forward tilt as well. Keep normal entry and any rear-passenger use in the choice, especially with a three-door Uno.
Cameron’s fitting view
Cameron would keep the OMP and Corbeau parts lists separate. He would confirm the current Uno adaptor or tailored kit, the exact seat version and every runner or support beneath it. A final trial with the driver checks the posture and clearance that a nominal mounting pattern cannot establish.
Plan your Fiat Uno seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: OMP’s current Uno adaptor application and seat-hole drawing; OMP 2024 seat, bracket and mounting catalogue, retained manufacturer source, including W/Y definitions and mounting examples; Corbeau subframe family; Corbeau RRS Low Base; current linked shop listings.






