Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Fiat Marea Bucket Seat Guide

Plan the Marea’s seat and lower fittings as one assembly

A Marea seat enquiry starts with the body, year and the mounts already in the car. Our listed Sparco base follows the manufacturer’s type 185 application. It shares reference 00499010 with some other Fiat entries, but the Marea has its own row to check.

Garreth would compare the fixed-back Sprint and reclining R100 shapes for the journeys you make. Cameron would put the actual base, runner and seat references on one parts list before choosing the hardware. Trial the complete position in the car before judging the result from a loose seat.

Front three-quarter view of an illustrative modified silver Fiat Marea four-door saloon with dark wheels, black bucket seats and yellow harnesses visible through the windscreen
Illustrative modified Fiat Marea saloon, not a customer installation.

At a glance

  • Listed fitting base: Sparco shop reference 00499010-1664; the manufacturer base reference is 00499010.
  • Sparco’s application table identifies Marea type 185, July 1996 to 2004.
  • The table names runner 00493 and 345mm x 271mm seat-side centres.
  • Our current runner card carries 0049306, a separate catalogue reference to confirm with the assembly.
  • Keep saloon or Weekend body details on the enquiry; this guide does not infer estate fit from a shared platform or code.

The Marea’s Sparco 00499010 application

Our Marea fitting listing carries shop reference 00499010-1664. Sparco’s catalogue gives Marea type 185 with base 00499010, for July 1996 to 2004. It names runner 00493 in the same application row.

The -1664 suffix identifies this shop listing. The manufacturer’s table uses the base reference, so confirm the actual supplied parts and physical seating side with the vehicle details. The suffix alone does not establish another frame geometry or a different set of floor dimensions.

Cameron would ask for photographs of the existing mounts and rails, especially if the interior has been altered. A seat arrangement seen in a Bravo or Brava should not stand in for that check. The maker’s Marea application is the useful starting evidence.

Keep the saloon and Weekend details with the enquiry

The illustration shows the Marea saloon, with four passenger doors and a separate boot. If your car is a Weekend estate, include that body name and photographs of its front-seat mounts. The Sparco row used here names Marea without separately detailing the estate body.

Use the catalogue’s application dates alongside the actual vehicle details. They are not a promise for every market or production year carrying the Marea name. Cameron would confirm the full application and current supplied kit for the car in front of us.

Specify the 00493 runner named by Sparco

Sparco’s vehicle table names runner 00493 for this application. The current runner card shown here carries 0049306, listed separately as Slide Runners KR in the 2025 catalogue. Both catalogue entries give 271mm longitudinal spacing, but they remain separate references.

Cameron would confirm the required current runner and its connection to the vehicle base before completing the order. A shared measurement alone does not establish the full assembly or handle position. Keep the seat, base and runner references together on the enquiry.

Trial the release and locking action with the driver seated. Check that both rails operate together and move through the range you need. Include the runner and all lower fittings when judging the finished cushion position.

Compare Sprint, Sprint Sky and Sprint L

The Sprint is a tubular-frame fixed-back seat to try for its cushion and backrest support. Sprint Sky offers a different upholstery surface, while Sprint L is the larger version. Garreth would sit in the intended size before choosing the finish.

Sparco’s 2025 catalogue identifies lower mounting at 271mm x 345mm and 290mm lateral fixing spacing for the illustrated Sprint and Sprint Sky models. Confirm the exact supplied version and its instructions. Choose the base-mounted or side-mounted arrangement before ordering the parts beneath the cushion.

R100, R100 vinyl and R333 reclining choices

The R100 fabric and vinyl versions give two finishes of the reclining seat to compare. The R333 has a different bolster and cushion shape to try. Garreth would judge support and getting over the side bolster before settling on upholstery.

Sparco’s catalogue gives the R100 family and R333 271mm x 345mm lower fixings. Match the exact supplied seat and its instructions to the complete lower assembly. Those centres establish one mounting connection without promising cabin clearance or an installed height.

Move the backrest through the range you need and check that its controls stay reachable. Trial the driver’s wheel and pedal reach with the seat in position. Keep any rear-seat access you want in the same check.

Plan the connection for a side-mounted shell

The Sparco steel side mounts shown here are an option to discuss for a seat using lateral fixings. They connect the shell to the lower assembly. Confirm the support reference, hole positions and connection beneath it against the exact seat instructions.

A seat using its lower fixing points does not automatically need side mounts as well. Cameron would identify each connection before completing the parts list. A different competition shell can require its own specific supports.

The 345mm x 271mm seat-side centres

Sparco’s application table gives 345mm x 271mm for the seat-side mounting reference. Its seat catalogue gives the same lower-fixing dimensions for the illustrated Sprint, R100 and R333 families. The diagram draws those centres at one scale.

The outer frame outline is schematic. It gives neither the Marea floor-hole pattern nor the outside width of a seat. Check the exact seat, controls and lower fittings separately when measuring cabin clearance and the finished driving position.

Seat-side bolt centres 345 by 271 millimetres, drawn to scale345mm across271mm front to rearSeat-side bolt centres; outer frame outline is schematic

Choose the belt layout with the seat

The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.

Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.

Trial the complete driving position in the Marea

Record the year, body, physical seat position and any previous changes to the mounts. Photograph the existing arrangement before selecting the parts. Use the current instructions supplied with the exact seat and vehicle kit, including the required fasteners at each connection.

With the driver in position, check the wheel, pedals, headroom and buckle access. Operate the adjustment through the range you need and check clearance with the door closed. Garreth would try normal entry and exit; Cameron would repeat the movement and locking checks after tightening.

Common questions

The shop reference is 00499010-1664. Sparco’s manufacturer table identifies Marea type 185 with base 00499010, July 1996 to 2004, and runner 00493. Confirm the actual vehicle, supplied parts and physical side.

The application names 00493. Our current runner card is 0049306, listed separately as KR in Sparco’s later catalogue. Confirm the required current runner and its connection; matching longitudinal spacing alone does not prove interchange.

Sparco lists the Marea under its own type 185 entry, despite sharing base reference 00499010. Use the actual Marea details and complete assembly for the fitting check. A photograph or platform relationship is insufficient on its own.

Send the Weekend body details with photographs of the mounts. The cited Sparco row names Marea without a separate estate description, so confirm that exact body and current kit before selecting the fittings.

The 345mm x 271mm dimensions describe seat-side mounting centres. They do not give the shell’s outside width or the car’s floor-hole pattern. Measure the exact seat and trial the complete position with the driver.

The cushion, runner and every lower fitting affect the final height. Trial the whole assembly and check headroom and control reach. This guide does not promise a height reduction.

A seat using lateral fixings needs its matching supports and a checked connection to the lower assembly. A seat fitted through lower fixing points is a different arrangement. Confirm the exact seat version and all connections before choosing the extra fittings.

Garreth’s top tip

Garreth would try the R100 and Sprint before deciding which direction suits the Marea. Compare support with the ease of getting over the side bolster and using the car normally. Choose the upholstery once you have found a shape you want to sit in.

Cameron’s fitting view

Cameron would keep type 185, the body, physical side and current mount photographs together. He would confirm the actual 00499010 base and required runner, then trial the driver’s position. The 00493 and 0049306 references stay distinct until the supplied arrangement is established.

Plan your Fiat Marea seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Sparco’s vehicle applications; Sparco’s seat and runner catalogue; current linked fitting and seat listings.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text