Fiat Stilo Three-Door Bucket Seat Guide
Keep the original-rail Sparco route clear from the start
Fiat gave the Stilo three-door and five-door distinct body styles, with an estate also in the range. This guide starts with the three-door Sparco base that we list. The manufacturer’s application calls for the original sliding rails beneath that base, which changes how the parts list should be planned.
Garreth would compare the fixed-back and reclining seat shapes for the car’s intended use. Cameron would identify the original rails, physical seating side and exact supplied base before adding anything else. Sparco limits this retained-rail arrangement to tuning use and excludes competition use in its catalogue notes.

At a glance
- Confirmed Sparco scope: Stilo three-door type 192, with catalogue application dates September 2001 to 2006.
- Manufacturer references: 00499029DX and 00499029SX; confirm the supplied physical side for the right-hand-drive car.
- Sparco’s Serie entry specifies original sliding rails underneath the base.
- The manufacturer’s original-rail note is for tuning use and excludes competition use.
- The OMP HC811 listing remains a separate body, year and supplied-part check before recommendation.
Sparco 00499029 for the Stilo three-door
Our three-door Stilo listing carries shop reference 00499029. Sparco’s own application table names Stilo 3 doors, type 192, with the DX and SX references. It gives September 2001 to 2006 for that application.
Keep the body style with the order. Those entries do not establish a five-door or Multiwagon installation from the shared Stilo name. For a car outside the stated application, send the full vehicle details before choosing the fittings.
The catalogue uses driver and passenger notes alongside its handed references. Cameron would record both right-hand-drive and the physical left or right seating position, then confirm the actual supplied kit. Side wording from another market should not decide the UK order by itself.
-
From £86.68 Incl. VATFrom £72.23 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Retain the original sliders beneath the Sparco base
The Guide column for this Stilo base says Serie. Sparco’s accompanying note defines that as the original sliding rails underneath the base. It is a different assembly from the applications that name a separate 00493 runner.
Photograph the present rails and mounts, including anything changed by an earlier owner. Cameron would check that the required original components are present and identify the connection to the new base. A generic optional runner on a shop card is not enough to select a replacement arrangement.
Sparco describes this retained-rail arrangement for tuning use and excludes competition use in the same note. A seat’s own approval label does not establish the use of the complete assembly. Keep a competition mounting enquiry separate from this original-rail route.
Confirm the OMP HC811 application before selection
We also list an OMP Stilo frame under HC811. The current shop description makes a wider body claim, covering the three-door, five-door and estate. We have not established that complete body range from a current manufacturer application for this exact supplied part.
Give us the body, year, physical seating side and proposed seat so the OMP route can be checked on its own terms. Confirm the actual maker reference, required runner and seat connection. The Sparco three-door entry cannot be used to prove the OMP listing’s wider scope.
-
From £95.38 Incl. VATFrom £79.48 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare Sprint, Sprint Sky and Sprint L
The Sprint is a tubular-frame fixed-back seat to try for its cushion and backrest support. Sprint Sky offers a different upholstery surface, while Sprint L is the larger version. Garreth would sit in the intended size before choosing the finish.
Sparco’s 2025 catalogue identifies lower mounting at 271mm x 345mm and 290mm lateral fixing spacing for the illustrated Sprint and Sprint Sky models. Confirm the exact supplied version and its instructions. Choose the base-mounted or side-mounted arrangement before ordering the parts beneath the cushion.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
R100, R100 vinyl and R333 reclining choices
The R100 fabric and vinyl versions give two finishes of the reclining seat to compare. The R333 has a different bolster and cushion shape to try. Garreth would judge support and getting over the side bolster before settling on upholstery.
Sparco’s catalogue gives the R100 family and R333 271mm x 345mm lower fixings. Match the exact supplied seat and its instructions to the complete lower assembly. Those centres establish one mounting connection without promising cabin clearance or an installed height.
Move the backrest through the range you need and check that its controls stay reachable. Trial the driver’s wheel and pedal reach with the seat in position. Keep any rear-seat access you want in the same check.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £449.47 Incl. VATFrom £374.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Plan the connection for a side-mounted shell
The Sparco steel side mounts shown here are an option to discuss for a seat using lateral fixings. They connect the shell to the lower assembly. Confirm the support reference, hole positions and connection beneath it against the exact seat instructions.
A seat using its lower fixing points does not automatically need side mounts as well. Cameron would identify each connection before completing the parts list. A different competition shell can require its own specific supports.
The 345mm x 271mm seat-side centres
Sparco’s application table gives 345mm x 271mm for the seat-side mounting reference. Its seat catalogue gives the same lower-fixing dimensions for the illustrated Sprint, R100 and R333 families. The diagram draws those centres at one scale.
The outer frame outline is schematic. It gives neither the Stilo floor-hole pattern nor the outside width of a seat. Check the exact seat, controls and lower fittings separately when measuring cabin clearance and the finished driving position.
Choose the belt layout with the seat
The TRS four-point example is shown for a seat-and-belt layout enquiry. Check the exact seat’s belt openings, available attachment positions and the belt maker’s routing instructions. The retained-rail Sparco route keeps the tuning-use limit stated in its catalogue notes.
Cameron would include buckle access and rear-seat use in that check. The seat base does not establish harness attachment points. A competition build needs its own complete mounting and belt arrangement; the original-rail route described here is excluded from that use by Sparco.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
Trial the complete driving position in the Stilo
Record the year, body, physical seat position and any previous changes to the mounts. Photograph the existing arrangement before selecting the parts. Use the current instructions supplied with the exact seat and vehicle kit, including the required fasteners at each connection.
With the driver in position, check the wheel, pedals, headroom and buckle access. Operate the adjustment through the range you need and check clearance with the door closed. Garreth would try normal entry and exit; Cameron would repeat the movement and locking checks after tightening.
Common questions
Sparco’s catalogue names the three-door type 192 with 00499029DX and 00499029SX, for September 2001 to 2006. The same Stilo badge does not establish a five-door or Multiwagon application for this route.
Yes. The application’s Serie entry is defined by Sparco as the original sliding rails beneath the base. Identify the actual components present in the car before choosing the full assembly.
The cited Stilo route retains the original rails. Confirm the present rails and the current supplied kit before selecting any additional adjustment parts. A shop-card runner option alone does not establish a replacement mounting arrangement.
Sparco’s Serie note specifies tuning use and excludes competition use. A competition build needs its own complete mounting enquiry; the approval on a seat does not establish the whole original-rail assembly.
Its wider shop description needs an exact manufacturer and supplied-part check. Send the body, year, seat and physical seating side before selecting that route. The Sparco three-door application does not prove the OMP body range.
The 345mm x 271mm dimensions describe seat-side mounting centres. They do not give the shell’s outside width or the car’s floor-hole pattern. Measure the exact seat and trial the complete position with the driver.
The cushion, runner and every lower fitting affect the final height. Trial the whole assembly and check headroom and control reach. This guide does not promise a height reduction.
A seat using lateral fixings needs its matching supports and a checked connection to the lower assembly. A seat fitted through lower fixing points is a different arrangement. Confirm the exact seat version and all connections before choosing the extra fittings.
Garreth’s top tip
Garreth would choose the seat shape around how the three-door is used and how you get into the rear. Try the cushion and bolsters before settling on trim. The original-rail Sparco route keeps the manufacturer’s tuning-use scope throughout the decision.
Cameron’s fitting view
Cameron would start with photographs of the original rails and the physical seating side. He would confirm the DX or SX base supplied for that right-hand-drive car and trial the whole position. The OMP listing remains a separate application check.
Plan your Fiat Stilo three-door seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Sparco’s vehicle application table and original-rail notes; Sparco’s seat and accessory catalogue; Fiat’s Stilo body descriptions; current linked fittings and seat listings.







