Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

BMW M4 Convertible F83 Bucket Seat Guide

Choose the seat with the M4 roof-up position checked

The F83 is the M4 Convertible, with a retractable hardtop and a different body brief from the F82 Coupé. Choose the front seat with the roof raised as well as checking it in the open cabin. Measure the full mounting assembly beneath the cushion before settling the driving position.

Planted explicitly lists the F83 in its SB223 application. Garreth would try the recliners alongside the fixed buckets before picking a finish. Cameron would match the exact seat and runner, then check the complete assembly in the convertible.

Front three-quarter view of an illustrative modified yellow-gold BMW M4 Convertible F83 with bucket race seats and blue harnesses
Illustrative modified BMW M4 Convertible F83, not a customer installation.

At a glance

  • Vehicle frame: Planted SB223, with F83 explicitly named in the maker’s application.
  • Body: F83 M4 Convertible. Keep that code with the year and physical seat position.
  • A sliding Planted installation uses a separate matched runner.
  • A side-mounted shell needs compatible side mounts as part of the assembly.
  • Order by physical left or right and steering side, checking the driver/passenger labels.
  • Measure the complete height and check shoulder, control and door-side clearance in the car.

The F83 Planted SB223 fitting route

Planted names the F83 Convertible explicitly in its SB223 3 and 4 Series application. Choose the bracket version with the runner and exact seat model. Include the physical seat position and photographs of any existing conversion with the enquiry.

The maker’s 2011-onwards label describes the wider family application. For this order, identify the car as an F83 M4 Convertible. Match the remaining fittings to that actual car and seat.

Left and right matter when ordering

Planted’s product pages call the left-hand bracket driver/left and the right-hand bracket passenger/right. That is its left-hand-drive naming, so a UK right-hand-drive driver sits on the opposite physical side.

Cameron would keep both the physical side and steering side on the enquiry. Include photographs if the current fittings have been adapted so the seat and bracket can be checked against the car as it stands.

Choose the Planted pattern with the runner

The standard Planted version includes its Recaro slider pattern. The alternate replaces that pattern with the Cobra/Scheel-Mann connection. Match the version to the runner you intend to use.

For a Cobra installation, identify the narrow or wide runner as well. Planted says the narrow version needs no modification, while the wide version uses its alternate pattern or a specified alteration to the standard connection.

Cameron would ask for the runner model if you already own one, together with photographs showing its holes and release mechanism.

Three Sparco buckets with different trim and mounting choices

The Sprint Retro and Sprint Sky give you two finishes to compare in the Sprint family. The Evo QRT Sky is a side-mounted shell, with compatible side mounts added to its lower assembly. Garreth would try the cushions and backrests before deciding on the finish.

Match the exact Sprint version and mounting choice to its runner. With the Evo, check both the shell and slider connections through the side mounts. Trial-position the full assembly for reach, shoulder clearance and entry through the door.

The sliding runner for a Sparco assembly

The Sparco runner is the separate slider to compare for the Sparco examples above the SB223. Match it to the chosen seat base or side mounts. Try the release and locking action through the useful travel with the assembly in the car.

Side mounts for the Evo QRT Sky

Compare these Sparco steel side mounts for the Evo QRT Sky. Check the shell and runner connections with the actual parts. Establish the angle and height with the assembly trial-positioned in the car.

Reclining seats to compare in the F83

The Sparco R100 and GT offer different cushion and backrest shapes to try, while the RECARO Expert S has adjustable backrest side bolsters. Each uses its own matched runner connection above the Planted bracket. Try the controls with the seat in its intended driving position.

Garreth would spend time in the options with the backrest set for a normal journey. Cameron would then check the installed height and the travel needed by every driver. Check the controls beside the console and door before choosing the seat.

A Recaro-width runner for the Expert S

The Endurance RECARO-compatible runner is the slider to compare for the Expert S on the standard-pattern SB223. Confirm the actual seat and runner connections before ordering. Measure the full installed height with the bracket and slider beneath the cushion.

Measure the Expert cushion and the space above it

RECARO’s Expert S/M drawing gives a maximum cushion envelope of 520mm wide and 545mm deep. Those dimensions exclude mounting hardware. The maximum overall seat height is 820mm, with shoulder clearance checked separately in the car.

RECARO Expert S and M maximum cushion envelope, 520mm wide and 545mm deep, drawn to scale520mm maximum cushion width545mm maximum cushion depthExpert S/M cushionPlan envelope, not a seat templateRECARO dimensions exclude all mounting hardware

Use the cushion envelope when measuring the F83, then check the seat’s shoulders and controls separately. The SB223 and runner sit outside these seat-only dimensions. Measure the actual completed assembly in the intended driving position.

The mounting order through the car

Planted’s installation instructions start with a trial fit of the vehicle bracket, followed by the seat assembly and a check of the complete position.

  • Base-mounted sliding seat: F83 floor, SB223 bracket, matched runner, seat.
  • Side-mounted sliding bucket: F83 floor, SB223 bracket, matched runner, compatible side mounts, shell.
  • Fixed mounting is another Planted arrangement, but can need holes drilled in the bracket and changes the adjustment available.

Follow the current instructions for the actual components, checking the floor connection and every fixing above it before the assembly is finally tightened.

Select the harness around the completed seat installation

The TRS Clubman four-point options give you clip-in or bolt-in end fittings to discuss with the intended anchor arrangement. The Schroth Profi 3×2 is a six-point option for an appropriate shell and full installation. Choose the seat and belt routing together, including the crotch-strap provision needed for a six-point belt.

Send photographs of the space behind the seats with the enquiry. Follow the harness maker’s current fitting instructions for the anchors and routing. A cage tube or harness bar is an anchor only where its maker specifies that use.

Measure with the hardtop raised

Check headroom with the roof raised and the complete seat assembly fitted. Keep any proposed harness route and anchor hardware clear of the roof mechanism’s movement. Include photographs behind the seats so the belt arrangement can be checked with the convertible body.

Details for your F83 seat enquiry

Send BMW M4 Convertible F83, year, steering side and physical seat side, plus the exact seat model and your height and waist. Include photographs of the current mounts and clearance beside the tunnel and door. Tell us how much adjustment each driver needs.

For a harness installation, include the space behind the seats and the roof mechanism. Choose the seat, belt routing and anchor arrangement together.

Common questions

The F83 M4 Convertible, using the explicitly listed Planted SB223 application. The F82 Coupé has its own model guide.

A sliding installation uses a separate matched runner. Check the seat and any side mounts with that runner before ordering the full assembly.

Planted’s driver/left label follows left-hand drive. Order by physical side and steering position to identify a right-hand-drive seat correctly.

Match the shell with compatible side mounts and the runner above the vehicle bracket. Check the actual connections and completed position in the car.

The standard-pattern version includes the RECARO slider connection. Match the actual runner and seat connections before ordering the parts.

Measure the complete bracket, runner, mounts and seat with the roof raised. Check shoulder clearance and the controls separately from the cushion envelope.

Garreth’s top tip

I would try the fixed shells and recliners with the roof-up driving position in mind. Set the backrest where you normally drive and compare the support around your hips and shoulders. Choose the seat shape before deciding on the finish.

Cameron’s fitting view

I would start with F83, year and physical seat side, then match the SB223, runner and seat together. Check the complete height and adjustment in the car. I would trial-position the assembly for reach and clearance before the fixings are finally tightened.

Plan your BMW M4 Convertible F83 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Manufacturer references: Planted vehicle applications, BMW applications and pre-LCI/LCI distinction, Planted installation arrangements, RECARO Expert S/M dimensions and controls. Model reference: BMW M4 Convertible F83.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text