Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Audi 4000 Bucket Seat Guide

Seats for the boxy 1980s Audi saloon

Keep Planted’s explicit Audi 4000 application for 1980 to 1987 beside the parts order, especially when comparing this North American model name with an Audi 80, 90 or quattro listing.

Cameron would start with the SB185 floor bracket and the side of the car being converted. Garreth would then compare a reclining seat for regular road use with a fixed-back bucket for a more focused build. The runner and any side mounts belong in that choice from the start.

Front view of an illustrative modified silver Audi 4000 B2 with race bucket seats and harnesses
Illustrative modified Audi 4000, not a customer installation.

At a glance

  • Manufacturer application: Audi 4000, 1980 to 1987.
  • Vehicle bracket: Planted SB185, with separate left and right versions.
  • Planted’s DR reference is driver/left; its PA reference is passenger/right. Confirm physical side when using a UK listing.
  • Mounting route: vehicle bracket, matched runner, then a base-mounted seat or a bucket on side mounts.
  • Planted offers standard and alternate slider patterns; choose the pattern with the actual seat and runner.

Start with the SB185 vehicle bracket

Our Planted SB185 Audi 4000 listing follows the manufacturer’s 1980 to 1987 application, with SB185DR for the left and SB185PA for the right.

The bracket connects the Audi floor to the aftermarket mounting assembly. A seat with lower fixings then uses a matched runner above it. A side-mounted shell needs its side mounts as well, with their position checked in the car.

Select the physical side, rather than transferring a driver/passenger description between markets. On a left-hand-drive car the driver sits on the left; a UK right-hand-drive driver sits on the right. Give us both the steering side and the seat position when completing the order.

Standard and alternate are different slider patterns

Planted’s current product information distinguishes two patterns. Standard retains its Recaro slider pattern, while the alternate version substitutes the Cobra and Scheel-Mann pattern. The floor application remains the SB185; the connection above it is the detail being changed.

For a Recaro-based order, we would start with the standard-pattern bracket and the appropriate Recaro-width runner, while a Cobra order needs its narrow or wide slider version checked against Planted’s pattern options.

Send the seat and runner models together before ordering a Cobra or Scheel-Mann installation. Cameron would check the actual components, not assume that every bracket carrying the SB185 floor reference has the same slider holes.

Choose the runner around the seat

We would normally build this Planted order with sliding adjustment, choosing one of the three runner routes below to suit the seat above the bracket.

The Sparco runner is the starting point to compare with a suitable Sparco base-mounted seat or side-mount assembly. OMP’s HC0-0665 is its slider option. The Endurance Recaro-compatible runner is intended for Recaro’s wider 405mm base spacing.

Check the fixing drawing through the whole assembly and measure the finished driving position. Planted’s installation guide also describes fixed-mount arrangements that can need new holes in the bracket. Garreth would settle the required adjustment before choosing that route.

How the seat assembly goes together

For the sliding route, the SB185 is the vehicle-specific component at the bottom of the assembly, with the runner and seat fittings above it chosen for the particular seat.

  • Base-mounted seat: Audi floor, SB185 bracket, matched runner, seat.
  • Side-mounted bucket: Audi floor, SB185 bracket, matched runner, compatible side mounts, shell.
  • Confirm the hardware and adjustment before final tightening, with the seat positioned in the car.

Planted’s instructions call for a test fit of the floor bracket and then a check of the complete assembly. Check door clearance, slider movement, steering-wheel reach and the space around the belt buckle. Use the maker’s instructions for the actual components when fitting them.

Bucket-seat routes to compare

The Sparco Sprint Retro gives an older Audi a period-looking trim choice. The OMP TRS-X is another fixed-back option with base and side fixings in its listing. The Sparco Evo QRT Sky is a side-mounted shell, so include compatible side mounts in its assembly.

Measure these seats against your cabin and driving position, including the shoulder room and headroom that the chosen shell needs above its complete mounting assembly.

Cameron would compare the current seat drawings and your height and waist before settling on a size. For the TRS-X, OMP’s catalogue uses a 345mm x 270mm Type Y bottom-fixing reference, so check the actual rail connection. For a side-mounted Evo, choose the side mounts and runner together.

Side mounts for a side-fixed Sparco shell

The Sparco steel side mounts are a starting point to connect the Evo shell to its runner assembly, with their holes and adjustment checked against both components.

Position the complete assembly in the Audi before selecting the mount settings that give you the seat angle and height you need.

Reclining options for regular use

Compare the cushion and backrest shapes of the Sparco R100, Sparco GT and Recaro Expert S if everyday road comfort is part of the seat change.

The Sparco seats list a 345mm x 271mm base pattern. The Recaro Expert S lists 405mm x 290mm, which takes the Recaro-width runner route on the standard Planted pattern. Do not transfer the Sparco slider choice to the Recaro order.

Garreth would ask how long you normally spend in the car and who else drives it. Cameron would check the recliner-control clearance and the adjustment each driver needs with the door shut.

Plan the belt mountings with the seat

The TRS Clubman four-point clip-in and bolt-in belts have different end fittings, and both listings say they are not HANS compatible. The Schroth Profi 3×2 is a six-point, HANS-friendly option for a suitable seat and complete installation.

Choose the belt around the actual seat and its routing, including crotch-strap provision for a six-point installation and the particular fitting arrangement of the reclining seat or competition shell.

Send photographs of the mounting area behind the front seats before choosing a harness. Follow that belt’s manufacturer instructions. A roll-cage tube or harness bar is a belt mounting location only where its maker specifies that use.

Check the car in front of you

Include photographs of any existing replacement seats, altered runners or other interior changes alongside the year, steering side and exact seat model with your enquiry.

Measure at the base and the shoulder wings, then check headroom in the complete assembly. Keep the seat close enough to the pedals and steering wheel for the driver. A matching floor bracket does not establish a lower seating position.

A UK Audi 80 or 90 enquiry should include its chassis and body details. The shared names and related B2 history are useful context, but a 4000 bracket application is not a blanket promise for every 80, 90 or Coupe.

Common questions

The Planted SB185 for the manufacturer’s Audi 4000 application from 1980 to 1987, with left and right versions.

The manufacturer lists SB185DR as driver/left and SB185PA as passenger/right. Match the physical side of your car, especially when ordering through a UK driver/passenger option.

Planted now offers standard and alternate patterns. Standard retains the Recaro slider pattern; alternate substitutes Cobra and Scheel-Mann. Confirm the seat and runner together when choosing the version.

Yes, the standard Planted route is a useful starting point for a Recaro with its matched runner. The Expert S lists a 405mm x 290mm base pattern, so use the appropriate Recaro-width fittings and check the complete position in the car.

Use compatible side mounts above the runner and SB185 bracket, with the mount holes, shell clearance and final height checked together.

Send the chassis, year and body details first. This guide follows Planted’s explicit 1980 to 1987 Audi 4000 application; related Audi names do not by themselves establish the same seat-floor connection.

Garreth’s top tip

I would keep the older Audi’s character in the seat shortlist, then choose the support and adjustment that suit how the car is used. A period-looking bucket and a comfortable recliner are both worth trying before the fittings are ordered.

Cameron’s fitting view

I would start with the physical side and the exact runner. The SB185 floor application is clear, but the standard and alternate slider patterns need to stay with the right seat combination.

Plan your Audi 4000 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Manufacturer references: SB185 left bracket and pattern options, right bracket and Planted installation arrangements. For the OMP Type Y reference see OMP’s 2024 catalogue, printed pages 68 and 69.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text