Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Make a Twist on Your Renault Clio With Sparco R100 Seats.

Seat fitting guide, Renault Clio

The Renault Clio has always been a small, lively hatchback, and the first three generations are still a favourite for fast road and track day builds. The cabins are compact, so the seat you choose has to add support without crowding the door cards, the centre console or the handbrake.

The Sparco R100 is the seat we suggest most often for that job. This guide covers why a reclining sport seat suits a Clio, what the R100 is, and the Sparco direct fit sub-frame for each of the Mk1, Mk2 and Mk3, which are different parts and do not swap between generations.

  • Sparco make a separate direct fit sub-frame for the Clio Mk1, Mk2 and Mk3
  • The frames bolt to Renault's own floor mounting points, with no drilling
  • Each frame gives the 345mm by 271mm base mount pattern the R100 uses
  • Frames are sold singly and handed: order a driver and a passenger side
  • Add Sparco sliding runners if you want fore and aft adjustment
  • The R100 is a Road and Track seat, not FIA approved
A pair of black Sparco R100 vinyl reclining seats with white diamond stitching on the showroom floor, with helmets and more seats behind
A pair of Sparco R100 seats in diamond stitched vinyl on our showroom floor.

Why a reclining sport seat suits a Clio

Factory Clio seats are built for general use: soft padding and little side support, so you end up holding yourself in place with the wheel and your knees in a fast corner. A sport recliner has deeper bolsters and a shaped back that hold you there instead, which helps on a good road or a track day.

A recliner keeps the car easy to live with. The backrest still adjusts, so you can set it for a long drive or for visibility, and getting in and out is no harder than with the original seat. It is not an FIA seat for competition, but for a road car that sees the odd track day it is the right balance.

The Sparco R100

The R100 is one of the most widely fitted reclining sport seats in Sparco’s range, and you will find it in everything from Minis to Imprezas. It has a tubular steel frame, weighs around 13kg, and is deliberately lower bolstered and narrower than some recliners. In a small car that matters, because a seat with taller outer bolsters may not clear the sill or the centre console.

  • Base mount on Sparco’s 345mm by 271mm pattern, shared with OMP and Corbeau base mount seats
  • Single lever recline
  • Harness slots for a 4 point belt, and it works with the standard seat belt for road use
  • Cloth in several colourways, plus vinyl, Martini Racing and diamond stitched editions
  • Road and Track approved, supplied as the seat only
R100 measurementApproximate size
Shoulder width500mm
Seat base width500mm
Seat base depth540mm
Height, upright930mm

Those figures come from our earlier measurements of the seat. If your Clio has a narrow gap between the door card and the handbrake, measure it before you order and send us the number.

The right sub-frame for your Clio

The seat does not bolt to the car. A sub-frame does, using the mounting points Renault put in the floor, and the seat bolts to the top of the frame. Renault changed the floor fixings between generations, so each Clio has its own Sparco frame and they are not interchangeable.

ClioSparco frameNotes
Mk100499061The earliest car. A direct fit frame keeps the installation reversible on a car that is now collectable.
Mk2, March 1998 to 200500499060Also listed for the 172 and 182.
Mk3, October 2005 to 201000499103Also listed for the 197.

Every one of these frames presents the same 345mm by 271mm base mount pattern on top, which is exactly what the R100 has underneath. So the seat bolts straight on, with no spacers or adaptors.

The frames are sold singly and are handed, so choose RHD driver or RHD passenger and order two for a pair. Check your Clio's build date before you order, because a 2005 car could be either a Mk2 or a Mk3.

A Sparco steel seat sub-frame for the Renault Clio Mk2 on a white background
The Sparco Clio Mk2 sub-frame, product photo.

Fitting, fixed or sliding

  1. Remove the original seat and keep its bolts. On an older Clio, lift the carpet and check the metal around the mounting points before you spend anything.
  2. Bolt the Sparco frame to the factory mounting points.
  3. For a fixed position, bolt the R100 straight to the frame. For adjustment, fit Sparco sliding runners between the frame and the seat.
  4. Refit the seat belt buckle and check you can reach it with someone sitting in the seat.
  5. Check the driving position, then tighten everything to the correct torque and check again after the first few drives.

Without runners the frame is a fixed position, which is fine if one person drives the car and it also keeps the seat a little lower. With runners you can share the car or fine tune where you sit. Our guide on whether Sparco runners bolt straight to the car explains why the runner always sits on a frame.

Which R100

The seat underneath is the same whichever trim you choose, so pick the one that suits the car. Plain black cloth gives a clean, factory plus look. The vinyl versions are easy to wipe clean, which suits a car that sees rain or muddy boots. The Martini Racing edition carries the famous stripes, and the diamond stitched vinyl gives a more finished look.

Garreth’s advice is to send us your Clio’s generation and year, your height and waist, and which R100 you like, and we will put the seats, frames and runners together and check they match before you order.

The Sparco Clio Mk2 direct fit sub-frame, part 00499060, which covers March 1998 to 2005 and is also listed for the 172 and 182.

No. The floor fixings changed between generations, so each Clio has its own frame.

Yes. The frames present the 345mm by 271mm pattern the R100 uses, so no adaptors are needed.

Only if you want fore and aft adjustment. Without runners the seat is fixed on the frame.

No. It is a Road and Track seat for road use and track days.

💬
The Clio combinationR100 on the right Sparco frame

A frame for your generation, the R100 on top, and runners if you want them.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text