Customer Car: Nissan 350Z with Mirco GT 3D Seats
Customer car, September 2025
The Nissan 350Z has always been an enthusiast's favourite: a strong V6, rear wheel drive and a coupe shape that has aged well. It is a great car to modify, and the seats make a big difference to how it drives. One of our customers has fitted a pair of Mirco GT 3D bucket seats to their 350Z, and the result looks the part.
The GT seats fit the cabin well, with the right amount of clearance to the doors, and give the snug hold you expect from a motorsport seat. To finish it off, the customer added harnesses colour matched to the car's purple paint, routed through the GT's harness slots.
- Car: the customer's purple Nissan 350Z
- Seats: a pair of Mirco GT 3D fibreglass bucket seats in black
- Harnesses: colour matched to the car
- Fitting: M2 Motorsport 350Z frames
- The GT is FIA 8855-1999 homologated and side mount

What is on this page
The build
This customer wanted a 350Z interior that looked like a show car but still worked on a track day. A pair of Mirco GT 3D seats, with harnesses in the car’s own colour, did exactly that. The seats sit well in the cabin and leave comfortable room at the doors, and the harness slots in the GT take the belts cleanly.
The result is a cockpit that looks great with the door open and gives the driver real confidence when pushing on. It shows how well a proper motorsport seat can suit the 350Z.
About the Mirco GT 3D
The Mirco GT 3D is a fibreglass fixed back competition seat, homologated to FIA 8855-1999. The fibreglass shell is strong without being heavy, so it suits road and track use. The 3D SpaceTech trim is a mesh fabric that breathes well, which helps on a hot track day.
The GT works with 4 point and 6 point harnesses and is HANS friendly. Mirco lists it for drivers under 6ft with a 32 to 36 inch waist. The GT also comes in vinyl and velour for anyone who wants a different finish.
- Light fibreglass shell
- Side bolsters for good lateral support
- 4 point or 6 point harness compatible
- FIA 8855-1999 homologated
- 3D fabric, velour or vinyl trims
Dimensions and fit in the 350Z
The 350Z’s cabin is reasonably roomy, but roof height and width can still make full bucket seats awkward. The GT’s balanced shape makes it an easy fit, and its back is tall enough to give good shoulder support.
| Mirco GT | Measurement |
|---|---|
| Overall height | 930mm |
| Shoulder width | 590mm |
| Base width, external | 495mm |
| Base width, internal | 380mm |
| Depth | 600mm |
| Weight | approx. 9.5kg |
Fitting the seats in the 350Z
The customer used M2 Motorsport frames made for the 350Z. The Mirco GT is side mount only, and an M2 frame is a complete kit, with the runners and side mounts included, so the seat bolts to the frame and the frame bolts to the factory mounting points in the floor. No fabrication is needed, and all you order is the seat and the frame.
M2 frames are not limited to the Mirco GT. They suit most standard sized side mount bucket seats, so the frame can stay if you change seats later. Tell us the seat and we will confirm it.
-
From £388.80 Incl. VATFrom £324.00 Excl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £166.20 Incl. VATFrom £138.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £380.40 Incl. VATFrom £317.00 Excl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Our Mirco GT range
The GT comes in a wide choice of trims: velour for grip and comfort, 3D fabric for airflow, and vinyl that is tough and easy to clean. We also list bespoke versions with custom options already set up, and with more than 250 variations you can make a GT that is your own.
Mirco also makes wider seats, and seats with head support for drivers taking motorsport more seriously. You can see them all in our Mirco FIA seat range.
Why the GT 3D works in the 350Z
Seats are often left until last on a 350Z build, but they make one of the biggest differences to how the car feels. The GT 3D gives strong support and FIA homologation, and with an M2 frame it is a straightforward bolt in job. Our Nissan 350Z bucket seat guide covers the other seats and frames that suit the car.
Garreth’s advice for any 350Z owner is to send us your height and waist size first, then we can match the seat and the frame together.
Does the Mirco GT 3D fit a Nissan 350Z?
Yes. This customer’s pair fits well with good clearance to the doors, on M2 Motorsport 350Z frames.
Is the Mirco GT 3D FIA approved?
Yes. It is homologated to FIA 8855-1999, with the expiry on the label.
Do I need separate side mounts with an M2 frame?
No. M2 frames are complete kits with runners and side mounts, so you only need the seat and the frame.
Which harnesses work with the Mirco GT?
It works with 4 point and 6 point harnesses.
Who does the Mirco GT suit?
Mirco lists it for drivers under 6ft with a 32 to 36 inch waist.
💬
Doing your 350Z?Seat and frame, matched
Send us your height and waist size, and we will pair the right seat with the right 350Z frame.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




