OMP road harnesses: our March 2025 range update
Our March 2025 announcement recorded refreshed OMP road-harness listings and branding, with black, red and blue options across the range.
Choosing one starts with the car and seat. The model comparison here uses OMP’s current specifications. The customer MX-5 photograph shows a different competition-belt installation for context, not the road harnesses being advertised.

What is on this page
OMP 4 point road harnesses
The four-point designs have two lap sections and two shoulder straps, with separate rear shoulder attachments. OMP specifies a central push-button buckle for the road models below; the name Racing 4M does not, by itself, mean FIA competition homologation.
- Road 4, DA0-0505-B01: OMP’s catalogue lists 2-inch shoulder and lap straps with plate attachments.
- Road 4M, DA0-0507-B01: snap-hook attachments. Confirm the supplied shoulder width: OMP’s current catalogue says 2 inches, while its US product page says 3 inches for that code.
- Racing 4M, DA0-0508-B01: the catalogue specifies 3-inch shoulder straps, 2-inch lap straps and snap-hook attachments.
- The earlier DA505 Road 4 listing uses an earlier reference. Check the supplied revision and contents before comparing it with a B01 listing.
Settle these model differences before ordering, including the colour and availability of the exact selection; a wider strap or different fitting does not, by itself, establish a safer installation.
-
From £108.00 Incl. VATFrom £90.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £147.60 Incl. VATFrom £123.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £106.46 Incl. VATFrom £88.72 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Three-point choices and a four-point alternative
The Road 3, DA0-0504-B01, and Strada 3, DA0-0509-B01, both have two shoulder sections joining into one rear attachment, plus the two lap attachments. Three-point counts the vehicle attachment points; these belts are not a lap belt with one diagonal shoulder strap.
OMP’s current catalogue lists 2-inch shoulder and lap webbing and plate attachments for both. Its Strada 3 product description also identifies push releases at the centre and shoulders. Confirm the exact supplied rear connection and instructions; sharing a point count does not make the two models identical.
A single rear attachment still needs a suitable location and geometry, so neither design is a guaranteed match for factory inertia-belt anchorages, a rear-centre seat or a car without a cage.
The third card in this group is the separate DA0-0505-B01 four-point listing. It is a four-point alternative; that code also appears in the Road 4 listing above, so ask us to confirm the order reference and package.
-
From £108.00 Incl. VATFrom £90.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £114.00 Incl. VATFrom £95.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £112.03 Incl. VATFrom £93.36 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
What the ECE approval means
For the current B01 models, OMP identifies ECE R16-08 in its 2026 car-parts catalogue, printed pages 108–109. The older “ECE 22.08” wording in some shop URLs is not the harness approval designation. A URL is not evidence of what is on the belt’s physical label.
ECE R16 and FIA harness homologation are different approvals. Check the supplied belt label and current event rules; an ECE-marked belt is not automatically accepted at every track day or competition. The catalogue also contains a stray “16-18” line in the Road 3 panel, so use the exact model’s confirmed label and documentation.
Before changing the car’s restraints, check the complete arrangement with a competent installer and the relevant testing authority or insurer; a product name or component approval is not enough.
Do not assume these road belts are suitable with a HANS or another frontal head restraint. For that use, we need to check the exact restraint, harness, seat and application together; strap width alone is not a compatibility approval.
Check the mounting arrangement before ordering
Garreth’s first questions are the car’s model and year, the seating position and which seat is fitted. Send photographs of the seat and proposed attachment locations, along with the belt code and intended use, so the arrangement can be checked before you buy.
Existing seatbelt points, a rear belt location and a cage or harness bar are not interchangeable solutions. A suitable mounting needs the correct load path, hardware and strap geometry for that belt and vehicle. Do not assume an eye bolt fits an existing threaded hole or that a bar permits wrap-around mounting.
Only use wrap-around mounting if OMP explicitly permits it for the exact belt. These road models list plate or snap-hook attachments. Their product photographs do not establish wrap-around permission.
Keep the factory restraint system serviceable while the proposed installation is assessed. Our guide to harnesses and standard seats explains why seat-back strength, shoulder routing and vehicle-specific approval matter. For competition-installation background, see the harness fitting guide; the exact manufacturer instructions remain the starting point.
Clip in or bolt in?
A snap-hook fitting unclips from its specified anchorage, while a plate attachment bolts into the approved arrangement. Neither guarantees an easy installation. The connection still has to suit the car and the belt instructions.
For occasional use, consider removal only after the mounting and restraint system have been checked. Ask Cameron to confirm the exact belt revision, the supplied hardware and what remains fitted when the harness is removed. Do not mix straps, buckles or attachment parts from different models without manufacturer approval.
What did the March 2025 update cover?
Our announcement recorded refreshed road-harness listings, branding, strap designs and colour options. Use the current model descriptions and selected colour when checking an order today.
Are these road harnesses FIA approved?
The current B01 road models discussed here are listed by OMP under ECE R16-08. That is not FIA harness homologation or approval of an arbitrary vehicle installation. Check the actual belt label and event requirements.
Does Road 3 have one diagonal shoulder belt?
No. OMP’s photographs show two shoulder sections joining into one rear attachment, plus two lap attachments. It is not the same layout as a factory lap-and-diagonal inertia belt, and its mounting must be checked for the exact vehicle.
Can I use one with a HANS?
Do not assume compatibility from an ECE label or strap width. These road models are not a substitute for a harness and installation specified for the exact frontal head restraint; ask us to check the full combination.
Can I wrap the shoulder straps around a bar?
Only if the exact belt’s manufacturer instructions permit that arrangement. The plate and snap-hook attachments listed here do not establish wrap-around approval; existing rear seatbelt points and bars also need vehicle-specific assessment.
Start with your car, seat and belt code
Send those details and the intended use so we can help check the model and mounting questions before you order.
Need help choosing the belt?
Tell us the vehicle, seating position, seat and intended use.






