Safety Devices Hyundai Coupe cages: our 2025 range update
In February 2025 we updated our Safety Devices listings for the Hyundai Coupe RD and GK. The four listings covered a full cage and a rear section for each generation. The trim requirements and approval wording differ between the two cars, so identifying the correct Coupe comes first.
- RD (1996–2000): Safety Devices Q060
- GK (2001–2008): Safety Devices Q196
- Full and rear sections have different ordering options
- Check the complete certification statement and fitting requirements

What is on this page
The Hyundai range
The range brought together RD and GK front/rear cage combinations, with rear sections also listed separately. Each uses components intended for that generation; the front section requires a compatible rear section. Door bars belong to the matching complete assembly, so check the chosen configuration before ordering.
The listed finish was black powder coat, with grey, blue, silver, white and red alternatives and an unpainted option by request. Confirm the finish and any special-order arrangements with us. A colour choice does not change which generation or cage configuration fits the car.
Hyundai Coupe RD (1996 to 2000)
For the RD (1996–2000), Q060 clears the normal trim and dashboard and mounts at the floor and rear wheel arches. The rear section is RBQ060 5SSU, with a fixed single diagonal. The RBQ060 3SSU front section must be paired with the rear; DSUN and DSUO identify the left and right single door bars.
Our RD full-cage listing and RD rear-cage listing separate those choices. Q060’s published compliance statement is limited to circuit racing and classifies the vehicle as a sports car up to 2,000cc. It is not a general approval for every discipline.
Hyundai Coupe GK (2001 to 2008)
Q196 is the GK (2001–2008) design, for a stripped cabin, with the front legs passing through the dashboard. The SSU combination uses a roof diagonal, rear single diagonal and harness bar with single door bars. The SXX combination uses a roof cross and rear crossed diagonals, harness bar and lower backstays, with cross door bars.
Use the GK full-cage listing or GK rear-cage listing for the required parts. Safety Devices makes national homologation conditional on its approval of the installation. Plan that process before fitting if a certificate is needed.
-
From £898.80 Incl. VATFrom £749.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,147.20 Incl. VATFrom £956.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £668.40 Incl. VATFrom £557.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
What the approvals mean for you
Compliance at the date of publication and national homologation are different statements. The RD circuit-racing limitation and the GK installation-approval condition remain part of the choice. Check the exact specification against the intended event before ordering, then agree the installation and inspection process.
Bolt-in describes the cage assembly; it does not establish a no-welding installation. Safety Devices explains that its reinforcement plates generally need welding and recommends professional or experienced installation. Obtain the instructions for the exact kit, inspect the mounting areas and confirm the shell preparation before work begins.
Garreth’s advice is to send us the Coupe generation and intended use first. Cameron’s fitting check is to consider the seat, belt route and dashboard clearance together. That gives the installer a useful starting point without guessing a fitting method from a product picture.
About Safety Devices
Safety Devices is a British maker of rollover-protection equipment. Our Safety Devices range brings together the listed vehicle applications. The cards here show current listings, so their prices and availability are separate from this February 2025 update.
Which Hyundai Coupe cage family do I need?
Use the vehicle generation: Q060 is listed for the RD (1996–2000), and Q196 for the GK (2001–2008). Check the exact car and chosen components before ordering.
Does bolt-in mean no welding is needed?
No. The cage sections bolt together, but mounting-plate work can still involve welding. Obtain the exact fitting instructions and agree the work with an experienced installer.
Can I keep the interior trim?
The manufacturer describes Q060 as clearing normal trim and dashboard. Q196 is intended for a stripped cabin, and its front section passes through the dash.
Is the RD cage approved for every competition?
No. The Q060 statement is limited to circuit racing and compliance at the date it was published. Check the current event requirements against the actual cage specification.
What does the GK installation approval mean?
Ask Safety Devices about the required approval process before fitting if a national homologation certificate is needed. Buying the cage alone does not complete that process.
For a project now
Compare the maker's Q060 specification, Q196 specification and approval and fitting FAQs with the selected shop listing. The product drawings are representative views; the exact component list and fitting documents determine the installation.
Our bolt-in roll-cage guide and guide to differing cage mounting methods offer later preparation reading. The SW examples explain why the term bolt-in needs care; they are not installation instructions for a Safety Devices cage.
Check the Coupe and cage together
Send the model year, RD or GK generation, chosen cage parts and intended event so we can check the listed application before you order.
Send us your Coupe specification
We can compare the listed cage and components with your car and intended use.



