Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

All New Titanium M8 Bucket Seat Bolt Packs Now Available

New in, November 2024

The bolts that hold a bucket seat to its side mounts are usually the last thing anyone thinks about. They are plain black steel, they do the job, and nobody looks at them twice. We have just added an alternative: the Endurance Motorsport Bucket Seat Titanium M8 Bolt Pack.

Each pack holds M8 x 25mm titanium bolts with washers, for fixing a bucket seat to its side mounts, and they come in four anodised colours. Alongside them we have matching Endurance Motorsport titanium M8 nuts in blue and gold.

  • New: Endurance Motorsport Bucket Seat Titanium M8 Bolt Packs
  • M8 x 25mm titanium bolts, supplied with washers
  • Four colours at launch: black, blue, candy burnt titanium and gold
  • For fixing a bucket seat shell to its side mounts
  • Matching titanium M8 nuts in blue and gold
A blue anodised titanium M8 bolt and washer holding a black bucket seat to its black steel side mount, close up at floor level
A blue Endurance Motorsport titanium M8 bolt fitted through a side mount on a black bucket seat.

What is in the pack

The pack is made for one job: fixing a bucket seat shell to its side mounts. The bolts are M8 thread and 25mm long, and each one comes with a washer, so you have the full set of hardware for the seat to mount joint in one order.

M8 is the thread most side mount bucket seats use, but not all of them. Corbeau seats, for example, use M10 fixings, so these bolts are not the ones for a Corbeau. If you are not sure what your seat takes, check the old bolts or ask us before ordering.

Why titanium in place of steel

Titanium is lighter than steel for its strength and it does not rust. A plain black steel bolt that has been in and out of a seat a few times, or sat in a damp car, can lose its finish and start to corrode. Titanium keeps its colour and surface far longer.

The weight saving is small, and we will not pretend otherwise. Across the handful of bolts in a seat it is measured in grams. On a stripped car where every part has been looked at, though, it is one more saving that costs nothing in strength.

Close up of a blue anodised titanium M8 socket head bolt and washer through the slotted holes of a black side mount on a black bucket seat
The blue finish on the bolt head against a black side mount.

The other reason is simply the look. Seat mounts sit low and in plain view as soon as the door opens, and a coloured bolt head against a black mount is a detail people notice. It is a small finishing touch for a build that has already had the attention everywhere else.

The four colours

At launch the bolt packs come in four finishes:

  • Black, for a clean metallic look that stays close to a standard bolt.
  • Blue, the finish in these photos, which stands out well against black mounts.
  • Candy burnt titanium, a gradient finish that runs through several colours.
  • Gold, a warmer finish that suits gold or bronze details elsewhere in the car.

Garreth’s advice is to pick the colour with the whole interior in mind: match the seat stitching, the harness, or other anodised parts already in the car, so the bolts look like part of the build.

Matching titanium M8 nuts

Where your mounts use nuts as well as bolts, we also have Endurance Motorsport Titanium M8 Nut Packs. They are made to go with the bolt packs and come in blue and gold, matched to the same shades as the bolts, so you can finish the whole joint in one colour.

If you have gone for black or candy burnt titanium bolts, standard nuts can be used with them. When fitting any seat hardware, tighten it properly and check it again after the first few drives. There is more on how the seat, mounts and subframe fit together in our guide to base mount and side mount fitting.

They are M8 thread, 25mm long, and each bolt comes with a washer.

At launch they came in black, blue, candy burnt titanium and gold.

No. Corbeau seats use M10 fixings, and these are M8.

Yes. Endurance Motorsport titanium M8 nuts come in blue and gold to match the bolts.

💬
The finishing touchTitanium M8 bolt packs

Lighter, rust free seat bolts in four colours, with matching nuts in blue and gold.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text