Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Nissan JP Roll Cages Updated For 2024

Roll cage news, May 2024

Ready for the 2024 season, our JP Cages roll cages for the Nissan 350Z have been updated. Every listing now has up to date information on the cage's approval, its specification and the car it is built for, with more colour and configuration options to choose from.

There are three 350Z cages in the range: a show cage that bolts in without welding, and two DIY kits for anyone who can weld and fabricate, one a half cage and one a full multipoint cage.

  • Our JP Cages Nissan 350Z roll cages updated for 2024
  • Three options: a show cage, a DIY half cage kit and a DIY multipoint cage kit
  • The show cage fits with supplied rivnuts, with no welding
  • The multipoint kit comes in seven configurations, from JPC1.5 to JPC6
  • JP build the cages from the same materials they use in their own race cars
A white JP Cages show cage with X bracing and a harness bar fitted behind the seats of a purple Nissan 350Z with its interior stripped
A JP Cages show cage fitted in a Nissan 350Z, from the JP Cages photos.

What has changed on the JP Nissan cages

Each JP Cages listing for the 350Z has been checked and rewritten for the new season. The listings now set out what the cage is approved for, what comes in the box and how it fits, and the options have grown, with more colours and more cage configurations.

JP make their cages from the same materials they use to build their own race cars. One point is the same on every listing: the photos of fitted cages are there to show fitment, and what you receive is the unfitted cage or the kit of parts.

The 350Z show cage

The JP Nissan 350Z Show Cage was developed to give a secure harness mounting point while still fitting in with the car’s trim. It has an X rear and an X centre with harness bars. The cage follows the standard MSUK and FIA procedures in everything except its fixing method, which is why it is listed as a show cage and not for competition.

Fitting needs no welding. The cage sits into position, each hole is marked onto the car, and it is drilled and fixed with the rivnuts that come supplied as standard. That makes it a practical choice for a road and track day car that needs somewhere proper to mount a harness.

DIY half cage and multipoint kits

The DIY Half Cage Kit is the budget route to a half cage. It includes the main roll bar, left and right back stays, X bracing, harness bars, gussets and mounting plates, plus captive nuts and M10 flange bolts for the bolt-in option. Positioning markers and an instruction sheet show where each labelled tube goes.

The DIY Multipoint Cage Kit is a full cage for track days on a budget: main roll bar, A pillar bars, front roof bar, rear stays, bracing, gussets and mounting plates.

An unpainted JP Cages multipoint cage with X rear bracing and a gusseted centre joint in a stripped white Nissan 350Z, seen through the rear hatch
A JP Cages multipoint cage built into a 350Z shell, from the JP Cages photos.

The multipoint kit comes in seven configurations. JPC1.5 has a single diagonal, a harness bar and single door bars, and each step adds more: X rear bracing, double door bars and a centre brace, then A pillar supports, a diagonal or X roof, and at JPC6, B pillar supports, an X centre and front strut triangulation. Both DIY kits are for someone with welding and fabrication skills.

Garreth’s advice is to decide how the car will be used before choosing between the show cage and a DIY kit, and to check your championship’s rules if it is going racing. Our guide to roll cage rules is a good place to start. JP make cages for many other makes too, including Audi, BMW and Mini, all in our JP roll cage range.

No. It follows MSUK and FIA procedures except for its fixing method, so it is listed as a show cage.

No. It is drilled and fixed with the rivnuts supplied as standard.

The main bar, back stays, X bracing, harness bars, gussets and mounting plates, with captive nuts and M10 bolts for the bolt-in option.

Seven, from JPC1.5 with a single diagonal up to JPC6 with B pillar supports, an X centre and front strut triangulation.

💬
Ready for 2024Three JP cages for the 350Z

A bolt-in show cage and two DIY kits, updated for the new season.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text