Sabelt SFI16.1 Steel 5 Point Harness by Sabelt. Here is what it is and what to check before you order. A harness holds you in the seat so the seat can do its job. Four, five and six point layouts differ in how they control the lap belt and the sub strap, and competition regulations usually specify which you need.
Sabelt SFI16.1 Steel 5 Point Harness specification
| Category | Sabelt Caterham / Westfield Harnesses |
|---|---|
| Approval | SFI 16.1 |
| Brand | Sabelt |
| Buckle Type | Latch Release |
| Harness Type | 5-Point |
| Webbing Colour | Black, Blue, Red |
| Installation Type | Wrap Around |
| HANS Compatibility | HANS Friendly |
| Application | Saloon |
| Harness Strap Width | 3โณ Shoulder to 3โณ Lap |
| Harness Series | Steel |
| Part number | 556S622SU2S |
Options available
Choose your options at the top of this page before adding to the basket.
- Webbing Colour. Black, Blue, Red
If the combination you need is not listed, ask us. A lot of this kit can be ordered to spec even where it is not shown as an option.
Choosing the right harness
A harness holds you in the seat so the seat can do its job. Four, five and six point layouts differ in how they control the lap belt and the sub strap, and competition regulations usually specify which you need.
Shoulder straps want mounting behind the seat at roughly shoulder height, angled no more than the manufacturer allows. Mounting them too low or too high is the most common harness fitting mistake and it matters in a crash.
We have been supplying motorsport kit since 2003, so if you are unsure between two options, ask.
What to check before you order
A handful of details decide whether this harness suits your car. These are the ones that matter.
- Approval: SFI 16.1. Check this against what you already run before ordering.
- Brand: Sabelt. Check this against what you already run before ordering.
- Buckle Type: Latch Release. Check this against what you already run before ordering.
- Harness Type: 5-Point. Check this against what you already run before ordering.
- Webbing Colour: Black, Blue, Red. Check this against what you already run before ordering.
If any of it does not match what you have, ask us before you buy.
Buying the Sabelt SFI16.1 Steel 5 Point Harness from SportSeats4u
Stock is shown live on this page. If you need the Sabelt SFI16.1 Steel 5 Point Harness for a specific event date, tell us when you order and we will confirm the lead time up front.
We have been in the motorsport trade since 2003, supplying club racers, race teams and workshops across the UK and exporting worldwide. That means the advice you get on fitment comes from people who use this kit, not from a spec sheet someone copied over.
If you are buying for yourself and you are torn between two options, call us. Five minutes on the phone usually settles it.
Sabelt SFI16.1 Steel 5 Point Harness questions
Is the Sabelt SFI16.1 Steel 5 Point Harness FIA approved?
Check the approval in the specification above. FIA harnesses carry an expiry date and scrutineers do check it, so buy with the remaining life in mind.
What do I mount the shoulder straps to?
A harness bar or a cage harness bar set at the right height. Mounting to the rear seat belt points or the floor behind the seat puts the strap angle badly wrong.
Four, five or six point?
Six point controls submarining best and is what most competition regulations now expect. Four point is simpler but allows more movement. Check your class regulations before choosing.
Can I fit a harness with the standard seat?
Only if the seat has proper harness slots. A harness pulling over the top of a standard seat back is not safe.
Not sure the Sabelt SFI16.1 Steel 5 Point Harness is the right choice? Send us your car details or what you compete in and we will confirm before you order.
Browse more sabelt caterham / westfield harnesses. Related: 2 Sabelt 4 Point Clip In Harnesses, Sabelt Silver Porsche 996 997 4 Point Harness, Sabelt Steel 4 Point Harness. Background reading: motorsport disciplines and what they require.





